The physics formula for calculating the distance of a free-falling object is
Near the surface of the Earth, the acceleration due to gravity g = 9.807 m/s 2 (metres per second squared, which might be thought of as "metres per second, per second"; or 32.18 ft/s 2 as "feet per second per second") approximately.
Additional Examples of Calculating Fall
Consider a 12-meter-wide patio with a 1:80 gradient: Rise = 1 unit. Run = 80 units. Fall per meter = 1/80 = 12.5mm.
A 2% slope means that a surface (such as a road or a train track) change in elevation by 2 units over a run of 100 units. This means that a 2% slope is present when the rise changes by 2 meters (or feet) over a run of 100 metres (or feet).
A 2% slope equals 𝟏/𝟒 inch of rise for every 1 foot of horizontal distance.
A ratio like 1 in 60 means the level drops 1 unit vertically for every 60 units horizontally. In practical terms, a 5 metre patio at 1 in 60 needs a total fall of about 83 mm. That is enough to encourage drainage without making the paving feel noticeably sloped underfoot.
Here's how to calculate this:
A 1 in 40 fall per meter means the height of the pipe or surface drops by 25 mm for every meter in length.
A 20% slope (or grade) means a surface rises or falls 20 units vertically for every 100 units of horizontal distance. This is equal to a 1-to-5 ratio (1 in 5) or an angle of roughly 11.3 degrees.
It takes a person approximately 2 seconds to fall 64 feet from a resting position, assuming standard Earth gravity and ignoring air resistance.
Gravity will accelerate any object at a rate of 32 feet per second per second. But what do we do with that number? What it means is that if we fall for one second we'll reach a speed of 32 feet per second. After two seconds we reach 64 feet per second.
1 g is just another way of saying "9.8 m/s2" or "9.8 kg m/s2 per kg". An acceleration of 2 g means an acceleration of twice what gravity would accelerate you at here on the surface of the Earth. It would be an acceleration of 2 times 9.8 m/s2, or 19.6 m/s2.
How you calculate a "fall" depends on what kind of fall you are measuring. The two most common scenarios are measuring a physical drop in physics or calculating a slope in construction and landscaping.
It takes very roughly 10 seconds to fall the first 1,000 feet and then about 5 seconds for every subsequent 1,000 feet – so if an experienced skydiver falls for about 10,000 feet before deploying their parachute they will have had roughly 60 seconds of freefall.
In plumbing, the "135-degree rule" is a code standard that dictates how much a horizontal drain pipe can bend or change direction. It limits the total cumulative angle of pipe fittings before a system requires an access point (cleanout) or must be vented, ensuring proper flow and preventing chronic clogs.
In the first second of a free fall starting from rest, you fall approximately 4.9 meters (or about 16 feet).
Schedule 40 is thicker than Schedule 20. In the pipe industry, a higher schedule number always indicates a thicker pipe wall and greater structural strength.
20 drops = 1 mL
Each drop ≈ 0.05 mL, based on the standard pharmaceutical drop size.
To decrease £47 by 24%, subtract £11.28 from £47, which results in £35.72.
Calculating percentage decrease
A 2% slope on a spirit level typically looks like the bubble touching the outer reference line of the vial. This represents a "quarter-bubble" offset, which is equivalent to a 1/4-inch drop for every 1 foot of horizontal distance.
Percent of slope is determined by dividing the amount of elevation change by the amount of horizontal distance covered (sometimes referred to as "the rise divided by the run"), and then multiplying the result by 100.