Instructions: - Pour a small amount of isopropyl alcohol into the pipe. - Add a couple of tablespoons of salt. - Cover the openings of the pipe with your hands or use plastic wrap. - Shake gently for a few minutes to allow the salt to scrub the interior. - Rinse thoroughly with warm water.
There's one tried and true method to get your glass clean and ready for green and that is with isopropyl alcohol, sea salt and a plastic bag or Tupperware container (if you're cleaning a bong).
The simplest and cheapest way, imo, is Epsom salt and 91% isopropyl alcohol. Get a Ziploc bag, put the salt and alcohol in it with the pipe, close the bag, shake it around a lot then rinse.
Pour some coarse salt and isopropyl alcohol into a ziplock bag with your pipe. Leave it for a few minutes, then give it a good shake to remove the residue. Rinse thoroughly with water.
You can use baking soda to clean drains and deodorize them. Just pour a half cup of baking soda into the drain and follow it with two quarts of hot water. Baking soda is a great cleaning agent for cleaning sink drains, as well as shower and tub drains, and it'll absorb foul odors, too.
The bacteria in black gunk thrives in water. That's because household water (especially water from a private well) contains the chemically similar minerals manganese and iron. As pointed out in Tap Score, “black slime is usually due to bacteria that feeds on oxidized iron and manganese in your water supply.”
Dish soap can be used to clean a water pipe in a pinch. However it will take longer than other methods. We would still consider an exfoliant such as course rock salt to be a necessity when cleaning a water pipe with dish soap. To clean your water pipe with dish soap, disassemble your water pipe and empty the water.
Cleaning water pipes can be done safely with stabilised hydrogen peroxide.
Rubbing alcohol works great but it can destroy the colors of your pipe or possibly leave unhealthy residues. Alternatively, you can use vinegar or Listerine and mix it with very hot water. Whatever you use, pour the mix into the container. Let your pipe soak for 5 minutes.
Chemical cleaning involves using specialized solutions such as acids and alkalis, to dissolve and remove deposits from pipelines. For effective results, chemical solutions like phosphoric acid for rust removal or caustic soda for organic deposits are employed.
1. Rinse the pipe with cold water, wipe out the bowl with a paper towel and run a wet pipe cleaner through the stem and mouthpiece. 2. Fill the pipe with ordinary table salt and soak the salt with rum or whiskey.
Soaking. To achieve this, you should let the cleaning solution sit inside the bong for the suggested amount of time, usually between 1 and 5 minutes. Allowing the solution to soak enables it to efficiently break down and remove any buildup, eliminating the need for vigorous scrubbing.
While white vinegar alone may not be as effective as a baking soda and vinegar combination, it can still help unclog drains with minor build-up. Pour about 1 cup of white vinegar into the drain, let it sit for 30 minutes to an hour, and then rinse with hot water.
Boiling water is a simple and effective method for cleaning resin out of a glass pipe. First, disassemble your pipe, then carefully pour boiling water through it to break down the sticky residue. The hot water helps to loosen the resin, making it easier to rinse away.
Vinegar And Baking Soda
This is a safe, natural way to break up clogs in drains. Start by pouring one-third of a cup to one cup of baking soda into the drain and let it go as far down as possible. Also pour in an equal amount of vinegar. The mixture will bubble and foam as it works to clear up the clog.
Use about a teaspoon of salt per four inches of pipe, then fill it almost all the way with alcohol. If you don't have coarse salt on hand, you can skip it, but it will help to dislodge particularly stuck-on gunk. Shake the pipe. Plug the holes with your fingers and give it a vigorous shake, up to 2 minutes.
Hydrogen peroxide dissolves organic matter to loosen and flush away debris such as skin cells. It also disinfects the drain as it works by reducing germs inside your pipes and making your sinks smell fresh and clean.
Salt-induced hydrogen peroxide promotes methylglyoxal accumulation to inhibit plant growth and stimulates sulfenylation of plastid triose phosphate isomerase.
You can also use it to clean your drains in the bathroom sink and bathtub, as well as your kitchen sink. However, can it be used to unclog drains? The answer is yes! Dawn dish soap is a great product for unclogging and cleaning your drains because it contains chemicals that break down grease and oil.
To stay completely green, you'll want to ditch the alcohol entirely. Instead, try soaking your pipe in a combination of salt and vinegar. Baking soda and vinegar work well, too. Or try combining a teaspoon of salt and baking soda with water.
Baking Soda and Vinegar
Begin by pouring boiling water down the drain. Then, add half a cup of baking soda and let it sit for a few minutes. Follow up with a mixture of one cup vinegar and one cup hot water. Cover the drain to trap the fizz, and after 10 minutes, flush with more boiling water.
The combination of baking soda and vinegar proves effective on just about any slime. The chemical reaction of the baking soda and vinegar, which has antibacterial properties, can break up the slime. If you pour in boiling water after you dump in the vinegar and baking soda combo, it will wash away any leftover slime.
Mold in bongs often appears as white, fuzzy patches resembling cotton or spider web-like strands. It can also manifest as black or pink slimy films on surfaces or stringy tissue particles floating in the water, indicating a growing mold colony.
Black stains/spots in a toilet bowl are caused by mold or mineral deposits especially manganese.