Cool is the other essential thermostat setting. It works similar to heat, but instead of running the heater, this mode runs the air conditioner. The Cool mode lets you pick your preferred maximum temperature. When the house is cooler than this temperature, the air conditioner will turn off.
Cool. Your system only cools your home. It won't start heating unless your Safety Temperatures are reached. Your thermostat starts cooling to try to maintain any scheduled temperatures or a temperature you've manually selected.
While the standard room temperature of 72 degrees Fahrenheit is commonly favored by many, others argue for higher settings, particularly when it's hotter outside.
But, generally speaking, if you want to get the best cost and comfort, set the temperature on your AC unit to 77 or 78 degrees Fahrenheit, and just leave it running. Bonus points if your unit has an “auto” setting, and if you've made sure the place is weather-tight and insulated.
Choose "AUTO" for energy savings and "ON" if you want constant air circulation or improved air filtration. Temperatures can soar or plummet depending on the time of year. Throughout the year, it is important to have reliable heating and cooling systems in order to keep your home supplied with cool or warm air.
Energy Efficiency
AUTO is significantly more energy efficient between the two modes since the fan is only running when your AC is going through its cooling cycle. This takes less power, which is more budget-friendly, with some estimates showing you can save as much as $50 per month just by keeping your AC on AUTO.
The blinking 'Cool On' message can indicate one of two things: the compressor protection feature or a startup delay after power loss. Both are normal safety features built into modern thermostats to ensure they provide the best service possible while protecting your HVAC system from potential damage.
WHAT IS THE BEST MODE FOR AC IN SUMMER? In summer, the best mode for your air conditioner is the "Cool" mode, set to a comfortable temperature around 78°F when you're home. This setting efficiently reduces indoor humidity and maintains a comfortable environment without overworking the AC system.
Set a reasonable temperature: HVAC professionals strongly recommend never setting the thermostat lower than 68 degrees in the summer. To balance comfort and energy efficiency, the Environmental Protection Agency recommends setting your thermostat to 78 degrees when you're at home and awake.
Best AC Temperature Settings While You Are Home
As you consider the most comfortable room temperature for your lifestyle and family, keep in mind that for each degree that you set your thermostat above 72 degrees, you can save up to 3% on your energy bill.
What is the Best Thermostat Setting for Summer Air Conditioner Use? Energy Star recommends the following thermostat temperatures for your air conditioner in the summer: 78°F during the day if people are home. 82°F at night if people are home.
If the temperature is set to 74°F but the thermometer shows 78°F, you will have to recalibrate the thermostat to account for this 4-degree deviation. Even with older AC units or furnaces, you might have to recalibrate your thermostat from time to time.
The EPA says that for every degree warmer you set your AC, you can save 6 percent on your cooling costs, although you get diminishing returns as you go higher and higher. Put simply, if your cooling bill is usually $170, setting your thermostat a single digit higher will save you over $10 a month.
1. Cool mode. This is the most common and usually the default setting when you first turn on the AC. This mode sends cool air throughout your room and is great for cooling down an area after a long, hot day.
The ideal thermostat temperature in the winter is 68 degrees Fahrenheit when you're at home. Energy.gov suggests that 68 degrees is a good room temperature while you're awake at home but recommends lowering it while you're asleep or away.
First, check your filters and coils for dirt and debris that may be impeding airflow. Once you've cleaned the filters and coils, run the air conditioner with just the fan so that the ice accumulation can melt off. If the AC still doesn't blow cold air, it could be that refrigerant levels are too low.
In short, the 20-degree rule of air conditioning states that you should always keep your AC unit at no more than 20 degrees lower than the outside temperature. It means that, if the outdoor conditions are at 95 degrees, you should set your thermostat at no less than 75 degrees.
Most people work better and are more productive when with a temperature setting in the 72–74-degree range. This setting is low enough to keep the house cool and dry and keep you and the kids awake during the afternoon hours.
Recommended AC Temperature for Sleeping
The Sleep Foundation says 65° is the best temperature for sleeping. However, if you prefer a slightly warmer or cooler room, that's okay, too. The recommended range is 60–68°, so there is some wiggle room.
Cool mode is the default mode in which the air conditioner operates (i.e. the temperature setting and fans speed). In cool mode, the air conditioner takes in hot air and runs it through the compressor so as to cool the air before blowing it out into the room.
As a rule, keeping your AC fan setting on auto can save money. Because you're not running the fan all the time, you consume less energy over time. Less energy consumption translates into lower utility bills.
In most situations, 78'F is the ideal AC temperature to save electricity. The U.S. Department of Energy advises keeping your home between 72° and 78° Fahrenheit to preserve comfort and a manageable electric expense.
Common Causes of an Air Conditioner Blowing Warm or Hot Air
These can be due to clogging issues, electrical problems, low refrigerant, evaporator coil malfunctions, or compressor problems. If you've ever had the ac system in your car stop functioning, it's often due to a refrigerant leak or dirty coil.
Understanding Why the LED Cool Indicator Light is Flashing on a Window Air Conditioner. If the Cool LED indicator light is flashing on the control panel of your Window Air Conditioner, this can be an indication that the evaporator coils are frosting up or are too cold.