If unsuccessful, the
The lock is pre-programmed with a default User Code of 1-2-3-4. It is recommended that you delete this code.
The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.
If you forgot your user code, there are two options:1. Add new user codes. 2. Reset Powerbolt 2 to factory settings to clear existing user codes and add new ones.
1) A programming code enables you to make changes without needing to access the programming button. This is ideal for landlords to allow programming from the outside, without access to the interior program button.
Make sure the User Code is correct and that the Kwikset button is pushed after entering the User Code. If the door still won't unlock, use a key to unlock the door. Call technical support for further troubleshooting.
While similar products Kwikset 913 Smartcode Electronic Deadbolt and Kwikset 909 SmartCode Electronic Deadbolt having this feature, Kwikset 264 Contemporary Keypad Deadbolt is again staying one step behind when compared to these locks. You can still have it rekeyed by a locksmith.
You will hear 3 long beeps after the 5 seconds is completed indicating the lock has been reset. A User Code is used to unlock the door while a Mastercode is a password for making changes to the lock features. Interior of door You will reset your User Code to 1-2-3-4 and Mastercode to 0-0-0-0 when the reset is complete.
On my Aura Deadbolt, what do the different colored lights on the status LED mean? In normal operating mode: Amber indicates locked. Green indicates unlocked. Red indicates low battery.
While the door is open, press the “Program” keypad button located on the interior side of the door. Enter a four to eight digit security code that you can easily remember on the outside electronic lock keypad.
No, user codes will not be lost if the batteries die or are removed.
For example, if you want to program User Code 2, press the program button twice. Many Kwikset locks hold 4 User Codes, but some hold as many as 30 at once. The program button is a small black button in the battery compartment of the lock.
Because most of the default code of the keypad door lock are very simple when they are set at the factory, either 00000 or 1234, which can be easily deciphered by strangers, it is very important to change a use code that only you know and is not easy to be guessed by others.
Two possible issues: The lock was not removed completely from another network before being paired with the new network. Follow your smart home system's instructions to remove (exclude/unpair) the device from any other network. Then, attempt to pair (add/include) the lock again.
First, check both sides of your key. Some key codes are stamped into the key. If you do not find your key code there, try contacting your contractor (this should be on file with him/her). Lastly, you can take your key to a locksmith to determine the key code (usually a free service).
Key management is now easier! Thanks to the two-cylinder Key Control Deadbolt with SmartKey Security, you can have one master key for all your units and unique keys for all of your tenants.