Dampen a microfiber cloth with warm water and wipe in the direction of the grain. Thoroughly dry the surface with another clean cloth. Stubborn grime: If water alone doesn't clean your wood veneer table, try diluting a mild soap with warm water and applying the mixture with a microfiber cloth.
Dust regularly with a slightly damp, soft, lint-free cloth. Wipe dry with a dry, soft cloth in the direction of the wood grain. Spills should be immediately wiped up with a damp cloth. Clean the surface with a soft cloth dampened with a quality cleaner formulated for wood furniture.
Cleaning Wood Veneer Furniture
It's also susceptible to hot plates and cups, which can cause it to blister and damage the finish. For the best cleaning results, use soap and water for cleaning with a microfiber cloth that will pick up dust particles instead of just pushing them around.
Mineral spirits should not be used on wood veneer nor laminate. We always recommend wiping your tabletops with a mild soap mixed with warm water and a properly mixed sanitizing solution, using a lint-free cloth. Acidic and abrasive cleaning solutions can damage the finish of commercial tabletops.
Make sure that it is a good quality stain from a reputable brand like Osmo. If you would prefer to treat your door using an oil, we would recommend either Osmo Door Oil 3060 or Osmo Door Oil 3033. We have carried out independent testing for these products and have seen no adverse effects.
Homemade Softener - There's an old veneer softener recipe of consisting of 3 parts water, 2 parts yellow glue, 1 part vegetable glycerin (which can be found at most pharmacies), and 1 part denatured alcohol. This combination will soften veneer but it's sticky, messy, and hard to dry.
Clean veneer and solid wood furniture 6-12 times a year with a mix of water and mild soaps such as Murphy Oil Soap. Dust your furniture regularly between cleanings (about once a week) with a dry dust cloth or a furniture polish that does not contain wax or silicone, such as Endust.
Use Vinegar
In cleaning your veneer wood floor, you can also use it by pouring it into a spray bottle, mixing it with water, and shaking the bottle vigorously for a proper mix. Since it's abrasive on its own, you have to mix it with water before using it to clean the veneer.
Boiled linseed oil and tung oil are two of the most popular types of oil used for veneer wood, although if you are installing them into the kitchen, mineral oil is probably the best option as it more food safe.
Mineral spirits can help to remove layers of dirt that build up over the years. For grimy wooden furniture, Murphy's Oil Soap is also an option. Always test before you do the surface of a piece. Once the piece is clean, you can use a small amount of mineral oil to shine it up.
When water is spilled onto a wood veneer and not immediately wiped away, there is a danger it could leave a stain behind. This will look darker than the surrounding wood and have its own unique discoloured pattern as salt and minerals are left behind as the water evaporates.
If it does accumulate a slight coating of dust or dirt on its surface, you don't need expensive cleaning equipment, hard-to-find cleaning agents, or a lot of time to properly clean stone veneer. Basically all you need is water and a little bit of mild detergent to remove excess dirt or debris. That's it!
Disadvantages: Wood veneers are attached to fiberboard, which are not as heavy as natural wood boards; if wood veneers are not coated with a surface polish, this makes it easy for liquids to be absorbed through the wood. And unlike solid wood, once damaged, wood veneers can be difficult or costly to repair.
Veneer is primarily, designed to give the illusion of solid oak but is manufactured with a layer usually thinner than 1/8 of an inch of hardwood and bonded to a manufactured surface such as High Density Fibreboard that is hidden below.
A mixture of vinegar and olive oil is an alterative, traditional way to clean your oak furniture. Mix two parts olive oil with one part vinegar, and if possibly, apply it thinly from a spray bottle. Use a soft, clean cloth to rub it gently into the surface.
homemade oil & vinegar furniture cleaner recipe
(Example: if you use 3/4 cup of oil, add 1/4 cup vinegar.) 2.) Mix it in a jar, dip a clean cloth into the mixture, then rub it into the wood. You don't need to wipe it off; the wood just soaks it in.
The abrasiveness of baking soda can ruin sealants and finishes of wood and even cause staining. Instead, opt for a mixture of dish soap and water to clean any wood surfaces. If you have used baking soda and stained the wood, you will likely have to sand back the area and reseal it to fix it.
Mix equal parts of vinegar and water in a cup. The acidic solution helps remove sticky residue and worn out varnish from your table. Dip your sponge into the solution and start wiping down the table completely. Avoid scrubbing with too much pressure as it will leave scratch marks on the surface of your table.
If you have a bottle of Murphy's Oil Soap under your kitchen sink or in your laundry room that you use to clean your hardwood floors, go get it and throw it in the garbage. Seriously, stop using it today. You can use it for other projects like furniture or cabinets but NEVER for wood floors.
For heavy cleaning, dilute 1/2 cup Murphy per gallon. Clean well with wrung-out mop, and mop any excess water. No visible residue, no rinsing required.
Looking for advice on how to treat Oak veneer doors? Interior Oak veneer doors can be treated with either a wax, oil or varnish.
Wooden veneers cannot be left unfinished as the raw timber will absorb any moisture on the surface, be that water splashes, wipe marks, and even oil from fingertips. This will soak into the top veneer layer, and it will stain. All timber veneers need to be finished with either a lacquer or an oil.
A pre-diluted solution that will flatten and soften your warped, buckled or curled veneers. Once dry the veneer will revert to its original state and can be glued and finished perfectly. Either spray or brush the solution over the complete area of both sides of the veneer sheet you would like to soften.
Mist veneer with homebrew solution
My bath is about 6 parts water, 3 parts alcohol, and 1 part glycerin. The solution will soften the veneer and keep it flexible during glue up. A common spray bottle is the right delivery tool. All it takes is a light misting on both sides to soften the veneer just before glue up.