Pour the liquid chlorine into the pool with the jug as close to the water surface as possible in order to prevent splashing. Add the liquid chlorine to the deep end of the pool. After all of the liquid chlorine has been added, brush the walls and floor of the pool.
Shock-chlorination is an essential and effective method of cleaning the pool. But you need to have the pump circulating the water for this to be effective.
You can add chlorine in tablets and sticks directly to the skimmer, and they slowly dissolve into the pool water. Liquid chlorine comes in gallon containers. You can apply it by pouring the liquid into the skimmer or directly into the pool water.
Often, it will look something like this. 12.5% Liquid Chlorine Pool Shock – Normal Dosage: 1 gallon of shock per 10,000 gallons of water. Shock Dosage: 2 gallons of shock per 10,000 gallons of water. Source: Champion Liquid Pool Shock instructions.
Depending on how much you have added and the size of your pool, it is generally safe to wait about 4 hours after adding liquid chlorine or until levels reach 5 ppm or lower.
All pool chemicals, aside from unstabilised liquid chlorine, are good for up to three to five years as long as they're stored in a cool and dark place away from sunlight and they're packed in air-tight containers.
So, are you looking for ways on how to add liquid chlorine to pool? You can either feed the liquid chlorine through your pool's mechanical chlorinator, or pour the solution directly into the pool. This is preferably done when the sun isn't out so that you achieve the best results.
Let's start with the blanket rule: Don't – not even ever – pour pool shock down into the skimmer. Whether you're using shock granules or shock pods, all types of pool shock should be applied directly to the pool – and when we say “directly to the pool,” we mean like, the big open area where you swim.
INITIAL STARTING DOSAGES :
Maintain chlorine at a minimum of 1.5 ppm and up to 3 ppm. The more swimmers you have and the warmer the water is, can double your pool's chlorine consumption. Add whatever amount of chlorine it takes to maintain a 1.5 ppm chlorine..
Running your filter after shocking your pool is a must and is just as important to your pool as shocking it is. Be sure to run your filter for at least 6 hours, but shoot for 24 hours to several days, if your pool is particularly dirty or has algae, to properly circulate the chlorine and clean the water.
Shock your pool at least once per week, or when your Total Chlorine is higher than your Free Chlorine. Apply the shock at night time, as sunlight burns up chlorine and greatly reduces its effectiveness. Run your pump (at night) for at least 8 hours to ensure good distribution.
It's best to shock your pool once the sun goes down and when the pool filter is running. If you put the shock in while it's sunny out, it will not work as well. Never shock your pool when people are swimming in it.
Liquid chlorine and granular shock have the same active chemical that sanitizes your pool, what changes is the strength and the way you use it. Liquid chlorine is less costly, unstabilized and comes in liquid form. Granular shock is stabilized and comes in a solid form that dissolves in your pool.
Liquid chlorine is preferred over chlorine tablets by pool professionals however home swimming pools will benefit too. Liquid chlorine quickly raises or maintains chlorine levels without raising stabilizer. Chlorine tablets maintain chlorine levels and add stabilizer to the pool water.
It Should Not Be Done Together
This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM. Only then should you introduce algaecide to get the best results.
Liquid chlorine is not stabilized and will burn off quickly in sunlight. Therefore, it should be administered in the evening, after the sun has set. Hold jug of liquid chlorine as far away from your body and as far into the pool as is comfortable and safe.
When it comes to pool chemicals and cleanliness, Chlorine is by far the most popular choice for above ground pools with decks, on ground pools, semi inground pools, or even wells.
Shock is liquid or granular chlorine. You should add one gallon (or one pound) of shock per 10,000 gallons of pool water every week to two weeks. During hot weather or frequent use, you may need to shock more frequently.
Dichlor is perhaps the most “best of all worlds” chlorine sanitizer. It is typically found in concentrations of 60-65%, which is comparable to cal-hypo. It is a powder sanitizer, which makes it easier to spread or broadcast around the pool than chlorine tablets.
Using liquid chlorine raises the pH of the water.
When added to water, liquid chlorine (which has a pH of 13) makes HOCl (hypochlorous acid – the killing form of chlorine) and NaOH (sodium hydroxide), which raises pH.
Alkalinity Adjusting Chemicals for Pool Start Up
It doesn't matter if it was too high or too low, chemicals are going to be needed. This should be the first chemical that you add to your pool during start-up. This one can really affect the pH level of your pool.
Open your pool under normal procedures, and let the filter run with its normal amount of chemicals. When all the other chemicals, such as chlorine. pH and alkalinity, are balanced, add the chlorine stabilizer. Add the stabilizer only after the filter has been backwashed to ensure it is cycled through a clean filter.