It's important to maintain your home's water pressure within an acceptable range. The ideal water pressure ranges between 40 and 80 pounds per square inch, with the recommended home water pressure at 60 psi.
The ideal water pressure level is between 50-70 PSI.
If your water pressure goes above 70 PSI (even occasionally), you should install a pressure regulator to your main water line.
Normal water pressure range
In general, residential water pressure ranges between 45-80 psi (pounds per square inch). If your water pressure is under 40 psi, it's considered low.
Measured in pounds per square inch (PSI), the water pressure inside a house is usually anywhere from 30 to 80 PSI. If you're wondering if your water pressure is on the high or low side, you can measure it with a water pressure gauge. Optimum water pressure is between 60 to 70 PSI.
Homeowners often complain about low pressure; however, having high pressure can result in expensive damage. The pressure level can vary, but 60 PSI (pounds per square inch) is recommended for most residential homes. Water pressure should be no higher than 80 PSI.
Anything over 80 psi is considered too high and could damage your plumbing system. On the other end of the spectrum, anything below 40 psi is considered low pressure, and anything below 30 psi is considered too low.
Most residential plumbing systems are designed to handle 40 to 60 PSI of pressure, with 80 PSI being the typical maximum and anything over 100 PSI being possibly detrimental to plumbing components.
If it's above 80 psi, you probably need to lower your water pressure.
The water pressure in your house measures how fast water travels through your pipes and out of your faucets. Normally, the standing residential house has a water pressure of around 80 PSI (pounds per square inch). Anything above 80 PSI is considered too high and can cause serious damage to your pipes and equipment.
Normal water pressure is generally between 40 and 60 PSI. Most homeowners prefer something right in the middle around 50 PSI. Once you measure the water pressure in your house, you can adjust it to a setting that is ideal for all family members and household uses.
As previously mentioned, the normal water pressure should register between 40 and 80 psi (pounds per square inch), with the recommended home water pressure being around 60 psi. Anything in between is considered good water pressure to have in your home.
Indoor water pressure typically falls between 45 and 65 psi, considered safe and efficient for any household plumbing system. Maintaining water pressure within this recommended range helps safeguard against potential damage to pipes, fixtures, and appliances.
The result is a strained system and prematurely failing parts. While 50 to 70 pounds per square inch (psi) is the ideal range, most plumbing fixtures are designed to work with water pressure up to 75 psi. Anything higher than this can damage your pipes and fixtures.
Any lower than 40PSI and some shower heads won't operate very well. Any higher than 60PSI -70PSI and you'll have to be careful not to burst any pipes that aren't rated for high pressure.
Ideal water pressure for homes is 50-70 psi, 60 is the sweet spot. Low water pressure can be caused by clogged pipes, leaks or closed shut off valves, high pressure can damage your plumbing and appliances.
The higher the psi, the more force the water is putting on your pipes. The ideal water pressure range for most homes is between 60 and 70 psi. If your water pressure is 80 psi or higher, you're likely going to run into some serious plumbing problems.
It's important to maintain your home's water pressure within an acceptable range. The ideal water pressure ranges between 40 and 80 pounds per square inch, with the recommended home water pressure at 60 psi.
Most home plumbing systems are not equipped to handle pressure above 80 psi, so if yours exceeds the limit, you should seek a remedy.
If your pressure is higher or lower, then you'll need to install, repair, or adjust your pressure regulator to comply. Adjusting your regulator is easy, as long as it's working properly. Simply tighten the screw down clockwise to increase pressure and counter-clockwise to decrease pressure.
80 psi – Prolonged pressure above these levels may damage appliances. (Recommended) 90 psi – Max rating for most whole-home filtration systems.
If, on the other hand, your home's water pressure is high, this can cause many problems such as burst pipes, leaks, or rattling pipes. These issues are likely to increase the amount of water your family is using, which will affect your water bill.
High water pressure can cut the lifespan of your appliances, causing you to replace them more often. Additionally, you'll experience more leaking faucets around the home, like in the kitchen sink, a toilet running, or the shower spitting water out even if you haven't taken one recently.
Constant exposure to high-pressure water can dry out your scalp, leading to irritation and inflammation. This kind of environment is not conducive to healthy hair growth. The scalp may become dry and flaky, leading to conditions such as dandruff.
When the pressure reaches levels of 100 PSI or above, it usually indicates an issue within the water network, rather than something within the home. Get in touch with a representative from your water supplier to discuss the problem, and they'll be able to advise you on what they can do to fix the pressure.