The best sealer for plaster depends on your project: Zinsser Gardz Problem Surface Sealer is ideal for binding porous, chalky, or damaged plaster. For a standard primer-sealer, KILZ Klear blocks alkali and prepares surfaces for painting. For natural lime plaster, a breathable option like Earthaus Sealer is recommended.
There are two methods to sealing the new plaster. Firstly, you can use a mist coat of white watered down emulsion. However, it is more preferable to use a primer or top coat and water down the first layer by 10%.
Without the mist coat you're likely to have very poor adhesion between your paint and your plaster and quite often it will crack, flake or even peel off in sheets in some instances!
Use KILZ STANDARD Primer on almost all interior surfaces including wood, drywall, plaster, brick, masonry and more. Not recommended for flooring, glossy surfaces, mold and mildew prone surfaces or for stainblocking.
The best primer for plaster depends on the condition of the wall. For raw, unpainted plaster, a breathable, alkali-resistant Zinsser Bulls Eye 1-2-3 Primer is ideal. For old, chalky, or damaged plaster, use Zinsser Gardz Problem Surface Sealer to lock down the surface. For painting new skim coats, a premium water-based PVA primer works well.
Kilz and Zinsser are the two heavyweight titans of the primer world, but they excel in slightly different applications.
5 Common Plastering Mistakes To Avoid
Lath and plaster was a skilled craft and a time-consuming technique and the advent of cheaper, mass produced, pre-manufactured plasterboard meant lath and plaster largely fell out of favour by the 1930s and 1940s. Plasterboard was simply faster and less expensive to install.
Yes, you can paint directly onto plaster, but never straight out of the tin without priming. Plaster is highly porous and will suck the moisture out of undiluted paint. This causes the paint to dry too quickly, preventing it from adhering and resulting in peeling or flaking later.
The best sealer for plaster depends on your project: Zinsser Gardz Problem Surface Sealer is ideal for binding porous, chalky, or damaged plaster. For a standard primer-sealer, KILZ Klear blocks alkali and prepares surfaces for painting. For natural lime plaster, a breathable option like Earthaus Sealer is recommended.
Applying a mist coat is a crucial step when painting new plaster, yet many DIYers and even professionals make costly mistakes. Skipping or incorrectly applying a mist coat can lead to peeling paint, uneven finishes, and a paint job that doesn't last.
To effectively water seal plaster, ensure the surface is fully dry, then apply a penetrating sealer such as polyurethane, clear epoxy resin, or a masonry waterproofer using a brush or roller. Let it dry completely for 24 hours, then apply a second coat for a durable waterproof barrier.
The best paint for new, unsealed plaster is a breathable, non-vinyl matt emulsion (often called "contract matt"). Because raw plaster is highly porous, you must "seal" it first with a mist coat—a base layer made by thinning the paint with water (usually 70% paint to 30% water).
New plaster is porous, so if you paint it with standard paint it will simply be absorbed by the wall. This means you'll need to apply more coats of paint, and the paint could start to peel later as it dries. To prevent this happening, you need to apply a mist coat first.
Red is universally considered the hardest paint color to cover. Vibrant red pigments are highly transparent and inherently prone to bleeding through subsequent layers. Other notoriously difficult colors to cover include black, dark blue, dark green, and bright yellow.
Durability. Since plaster is a thicker material than drywall, it is a much more durable material. In fact, one of the easy ways to tell if a wall is made of drywall or plaster is if you can easily stick a push pin in the wall; it is most likely drywall.
In use as early as 1900, rock lath (also known as "button board," "plaster board" or "gypsum-board lath"), is a type of gypsum wall board (essentially an early form of drywall) with holes spaced regularly to provide a 'key' for wet plaster. Rock lath was typically produced in sheets sized 2 by 4 feet (610 by 1,220 mm).
Plaster isn't a trend. It's actually one of the oldest wall finishes in the world, and it's making a major comeback because people are finally realizing that a wall can do more than just be a backdrop. It can set the entire mood of a room.
Don't rush – a quick finish is a poor finish.
One of the worst things you can do for your plaster is rush the job. Plastering requires proper preparation of the surface and time to dry. Rushing through the steps will end in disaster for your finish.
To tell if you have plaster or drywall, the quickest methods are the pushpin test (drywall is soft enough for a pushpin, while plaster will resist it) or the outlet test (removing a cover plate reveals messy, layered plaster or uniform drywall).
It's common to find a few uneven areas on a newly plastered wall – particularly in the corners. Remove them gently with a scraper, and then sand the wall with 180-grit sandpaper. This should 'key' the surface without scratching it, making it easier to apply paint.
Though the name itself is misleading, KILZ paint and primers do not actually 'kill' mold. But it will prevent mold. The brand does well to kill a stain's ability to show through the final coat of paint by sealing over the stained surface with an impermeable interior barrier.
As you might guess, a primer that bonds peeling paint is not suited for use on substrates such as glass, glazed brick or Kynar.
Since bare plaster can be both extremely porous and high in alkalinity, Gardz is the perfect primer for the job, as it will address the plaster's porosity and prevent the alkaline from attacking the newly applied paint.
For painting bare plaster, use a high-quality acrylic latex primer (like Zinsser Bulls Eye 1-2-3 or KILZ 2). Never use straight PVA or wallpaper glue to seal bare plaster. Alternatively, you can apply a "mist coat"—your topcoat paint thinned with 10% water.