Acidic commercial cleaners and those containing harsh chemicals, like bleach, can damage and dull natural stone surfaces.
It's essential to only use cleaners which are appropriate for natural stone surfaces. This means avoiding using vinegar. Stones like limestone, marble, or travertine will react to vinegar because it's an acidic cleaner with harsh effects. It can even lead to burning or etching to occur on the surface of the stone.
Best stone tile cleaner: Bona Stone Tile & Laminate Spray
It has a rinse-free and streak-free formula that removes dust, dirt, and grime. This safe and effective tile cleaner can be used around children and pets.
When you use products such as Fabuloso or Pine-sol, they are not the correct products for cleaning your tile or stone. They can leave a residue behind that can dull your surface.
Maintenance and Cleaning of Natural Stone Surfaces
Never use abrasive cleansers, “soft scrub” products, or harsh/acidic chemicals on any stone as these can scratch or dull the polished finish. This includes substances like ammonia or many common liquid cleaners, such as Windex.
Clean stone surfaces with warm water and a mild soap such as a clear Dawn Liquid Soap. Do not use products that contain lemon, vinegar or other acids on marble or limestone. Rinse the surface thoroughly after washing with the soap solution and dry with a soft cloth. Change the rinse water frequently.
Fill a recepient of warm water and use only water, or mix it with a small amount of neutral liquid “All-Purpose-Cleaner”, detergent or cleaning solutions specific for stone. Change the solution when it starts to get dirty. Dip a microfiber towel, a duster or a mop into the water mixture and start cleaning.
Apply a paste of baking soda and water over the stain and leave it for 24 hours. Gently scrub the area and rinse it with plain water. Stains on Sandstone pavers, Travertine floor tiles, and Marble floors can easily be cleaned with a baking soda solution.
DON'T: Use harsh or abrasive cleaners and sponges.
Windex; acidic cleaners, like vinegar, lemon, lime; or anything with ammonia or bleach should be avoided. Frequent use of these chemicals will dull and weaken the sealant over time.
To maintain the luster and shine of your natural stone, use a stone-safe polish about once a week. To polish stone, simply spray the polish directly onto the surface, then buff the surface until it's dry with a lint-free cloth or dry paper towel.
Simple Green Granite & Stone Polish is safe for use on granite, marble, travertine, limestone, porcelain, ceramic, quartz, Corian®*, Silestone®*, and other natural and engineered stone surfaces.
Many home cleaning products, particularly bleach and vinegar, are too harsh or acidic to be on natural stone. These cleaners strip down the stone and leave it in a weak, damaged state. Unfortunately, whenever natural stone is damaged it cannot always be repaired back to its original condition.
When using Dawn Powerwash, you should avoid cleaning porous surfaces such as marble and other soft natural stones or untreated wood. It is also best to keep Dawn Powerwash away from painted surfaces, too.
Steam cleaning can cause a condition known as spalling. Since most stone is porous, the high temperature of steam cleaning can cause pressure within the stone, which can lead to pitting and/or flaking of the surface of the stone.
Countertops. If you want to keep your stone countertops looking beautiful, don't reach for vinegar. The acid etches and dulls natural stone such as marble and limestone. It can slowly dissolve them, according to Beckman.
Non-acidic dishwashing soap such as Dawn can also work well on these floors, but you must be sure to rinse them well so that the soap won't leave a film.
⇒ While using vinegar on granite countertops or natural stone surfaces, may damage the seal and polish layer applied to them. ⇒ Sometimes, vinegar can cause structural damage to your stone surface. ⇒ Instead of removing stains, vinegar can cause hard stains on the natural stone.
We've said it before (and we'll say it again) DO NOT use Murphy's Oil Soap on any natural stone surface. Following our 20 years experience and the Marble Institute of America's Maintenance Guidelines, we recommend a neutral PH rinseless stone soap, used with an unbleached clean nylon pad to clean stone.
On light colored stones, clean with bleach or hydrogen peroxide. On dark colored stones, clean with lacquer thinner or acetone. Small amounts can be removed with lacquer thinner or scraped off carefully with a razor blade.
Keep It Simple to Clean Natural Stone
“I always recommend starting slow, and if you need something a little more aggressive, going up from there,” Alicandro says. You can use any type of mild soap detergent, such as dish or hand soap, and mix it with a little water.