Skip wasting energy on whole-house AC and just hook up a portable unit to that one stuffy room. 71°F does the trick for your home. It takes the edge off the heat without pushing the energy bill too high.
The recommended thermostat setting of 78 degrees in the summer is designed to balance energy savings and comfort. However, not everyone is comfortable at the same temperature.
This is more of a personal question, as different people feel comfortable at different temperatures. Since 72 degrees is generally agreed upon to be an ideal indoor temperature, most people would probably still feel comfortable setting their AC units slightly higher than this, perhaps at around 75.
Place the portable AC where the cool air can flow freely. So, avoid installing it behind furniture or putting anything in front of the unit that could block the airflow. Also ensure the air inlets aren't blocked either as this will prevent the unit from removing hot air from your room.
According to the DOE, the ideal home temperature during winter weather is 68 degrees Fahrenheit. In comparison, the ideal air conditioner temperature during the summer months is 78 degrees Fahrenheit.
We'd actually suggest keeping your home's thermostat in between 72 degrees and 76 degrees to make things as simple and straightforward as possible for your home. It's a reasonable temperature that will keep you cool without overworking your AC.
So, a safe setting is 75 degrees. However, this is only necessary when you're in your home. If you're like most, you are gone during the day. When gone, you can set your thermostat anywhere from 76 to 78.
In most cases, yes. Not only is continuous use better for the health of your unit, but it won't cost you any excess energy. Most AC units will automatically turn themselves off once the room is at the desired temperature, but this isn't the same as shutting the unit down entirely.
Q: “I have a portable air conditioner that is not keeping the room cool enough, what's wrong with it?” A portable AC unit can fail to properly cool off your space if it is not powerful enough, the room is not properly sealed, or the unit is dirty. Unfortunately, units love to act up on the hottest days of the year.
Yes, portable air conditioners use a lot of electricity. The power consumption of an 8,000 BTU portable unit (150 square feet of cooling power) with a standard EER is comparable to a 24-hour microwave.
Thus, temperature setting below 68 degrees is generally not recommended for optimal performance. The ideal temperature lies between 75 to 78 degrees.
Additionally, lower settings can cause your evaporator coil to freeze. There isn't enough heat exchange, so ice forms on the coil, causing the system to stop working until it defrosts. Any temperature below about 68 degrees puts you in danger of freezing.
The lower limit
Even when the temperature outside isn't at heatwave levels, we recommend you don't lower the AC's setting below 68°F. This temperature is already more than cool enough for most people, and many will find it too cold.
That said, a portable air conditioner can run for about 8 to 12 hours a day, but it's important not to use them for too long to keep them working well. KEY TAKEAWAYS: You can run a portable AC as long as you like, but there are a few caveats to remember.
Dry mode is ideal when the conditions are humid and “sticky” and temperatures are not too hot, for example, on days when the weather has a tropical feel, and it's been raining or about to rain. However, this mode won't perform well on hot summer days — switch to cooling mode at these times.
Choose the right temperature
As per the Bureau of Energy Efficiency (BEE), the ideal temperature for the human body is 24 and any AC will take less load to achieve that target. So, it is better to set the AC temperature around 24. This will save more electricity and also cut down the amount of bill.
A portable air conditioner rental cools your room by extracting the heat from the space and blowing it outside. Thus, the exhaust hose always has hot air flowing through it. If your portable AC develops a leak, the hot air will go back into your room. If it does, it will be counterproductive.
If your air conditioner is blowing out warm air, your unit's refrigerant levels might be low. This usually indicates a refrigerant leak in your system! If that's the case, your air conditioner will continue to run and blow out warm air, trying to reach the temperature you set on your thermostat.
The cons of mobile air conditioning are:
Noise levels are quite high; Not energy efficient; Not a good choice for large rooms; Once the air conditioner cooling pipe is brought out the window, it is quite likely that you do not want to move it, so as not to spoil the installation.
The simple truth — Portable AC units will use more energy to hit your ideal cooling temperature. But, that doesn't mean that you can't use this type of air conditioner to help you save money and lower your energy bills.
Haier - Portable Air Conditioner Transporting
If it was on its side for more than a day, leave standing for 24 hours before running. If it was laying on its side just briefly to service, clean, or adjust, then just a few minutes of stand time will be enough.
What Temperature Should You Set Your Thermostat When It's 100 Degrees? A good rule of thumb is during the hottest days when the dial reaches 100 degrees it is best to set your AC to somewhere between 75 and 80 degrees.
Start by setting your air conditioner high
And, the best spot to do it at is 78 degrees Fahrenheit. According to Energy Star, it's an ideal temperature. 78 degrees keeps you fairly cool and comfortable during the day.
Many HVAC and AC unit installers recommend a difference of 20 degrees Fahrenheit between your home's indoor temperature and the outdoor temperature. Should the thermometer hit 100 degrees outside, you should set your air conditioning temperature to 80 degrees Fahrenheit.