One easy method is to use standard cooking oil or oil-based materials. Vegetable or canola oil can work wonders, as can peanut butter or mayonnaise. Spread it on, let it soak into the residue for about an hour, then wipe it away. For a tougher clean, try rubbing alcohol or vodka.
Rubbing Alcohol or Vodka
Wet a paper towel or clean cloth with rubbing alcohol, and rub the residue to lift it off. For stubborn stickers, place an alcohol-soaked cloth on the area and let it sit for several minutes to soften the residue. Use the cloth to rub off what's left behind.
Here's what you do: First, apply cooking oil and scrub with a brush to the area. Then spray with white vinegar and buffer with a dry towel. Finally, wash with dish soap to get rid of any oil and vinegar, and buffer again until clean.
3M adhesive remover is amazing stuff. It beats Goo Gone by a wide margin, I recently used it to remove PETG residue from my 3D printer bed and that stuff is gnarly. 3M 38983 General Purpose Adhesive Remover - 12 oz. https://www.amazon.com/dp/B004EBNTYK/ref=cm_sw_r_cp_api_i_cU...
Some stubborn adhesives melt or soften and become much easier to remove when heated. Heat the adhesive using a heat gun. If you do not have access to a heat gun, a hair dryer may work in a pinch. Once the surface is hot, try to gently scrape the adhesive away using a putty knife.
The WD-40 Multi-Use Product will need a bit of time to soften the sticker adhesive for all the residue to be removed by a rag, so allow several minutes for the formula to sit on the area. Once the product has loosened the adhesive, use a clean rag to wipe away the rest of the sticker residue and the excess product.
One easy method is to use standard cooking oil or oil-based materials. Vegetable or canola oil can work wonders, as can peanut butter or mayonnaise. Spread it on, let it soak into the residue for about an hour, then wipe it away. For a tougher clean, try rubbing alcohol or vodka.
The highest strength industrial degreaser available, Solvalene was created for the toughest degreasing applications. This alkaline fortified, water based degreaser is extremely versatile and can handle most heavy duty cleaning assignments.
Quick tip: Oil-based ingredients like mayonnaise and even peanut butter can also work in a pinch. Apply mayo or peanut butter to a sticky surface, wait 20 minutes, and then wipe it off with a dry cloth. Repeat the process if necessary.
Hydrogen peroxide can soften up sticky residue. Soak a cotton ball in the peroxide and apply it liberally to the residue. Let this sit for about 10 minutes before using a putty knife or spatula to remove the adhesive. Work gently and carefully to avoid scratching the glass.
White vinegar is a safe and natural cleaner, deodorizer, and adhesive remover you can use on many surfaces. Soak a paper towel in vinegar and cover the sticky spot. Let the vinegar soak for a few minutes to dissolve the adhesive, then scrape it off with a credit card.
It's unsurprising, then, that the world's strongest glue is an epoxy resin. DELO MONOPOX, made by the German adhesives company DELO, currently holds the Guinness World Record for the heaviest weight lifted by glue (bit.ly/3RFEZv2).
Soak the glue residue in rubbing alcohol, acetone, or vinegar. Leave it soaked for a few minutes then try scraping it off again. If the glue still proves too stubborn, try heating it up with a hair dryer. This should help loosen up the glue.
Degreaser should not be used on plants or animals and kept out of children's reach. When using degreasers in food preparation areas, make sure you don't have uncovered food lying around. Use appropriate amounts on a surface. Usually it's best to take small amounts and do the cleaning with that.
WD-40 is a multi-use lubricant spray that can also be used for sticker residue removal. To apply, simply spray it over the affected area and leave for several minutes. The glue should then just wipe away!
Using a hair dryer, heat gun, or heating pads can make it easier to remove stubborn residue. Heat is essential for many chemical processes, and the molecules in the 3M adhesive will loosen up when exposed to enough of it.
Rubbing alcohol is an effective solvent that's safe for use on many surfaces. Pour some of the solution on a clean rag or paper towel and use it to rub the residue until it comes off. For stubborn residue that refuses to budge, place an alcohol-soaked rag over the sticky area for a few minutes to soften it.
Goo Gone may work. I use 3M adhesive remover which works great.
Vinegar. Vinegar is a common household item that can be used to remove sticker residue. The acid in the vinegar is good for eroding away sticky glue. Simply wet a rag or paper towel with vinegar and rub it over the residue until it starts to loosen.
To remove strong adhesive left by a sticker, apply an oil-based substance like cooking oil or WD-40 directly onto the adhesive. Let it sit for a few minutes to loosen the glue, then gently scrape it off with a plastic scraper or credit card. Wipe clean with a damp cloth.