BIN shellac based primer is the best primer overall for laminate and wood furniture. It is shellac based, so it is stinky, but the shellac helps the primer stick to laminate furniture (it has the best adhesion out of all the primers out there!) It's thin, so it's easiest to roll it or spray it on.
The BIN shellac-based primer, Cover Stain primer, and clear shellac primer mentioned above all come in aerosol spray paint cans and are SO good at getting paint to stick to laminate cabinets or furniture.
Priming is really important with laminate furniture, so don't jump straight to applying the paint as this will be wasted effort. If the laminate has never been painted before, you will need to apply two coats of primer. When the first coat of primer has dried, lightly sand it before applying the second coat.
Tip: Latex paint is recommended for laminate surface painting projects because of its durability and smooth finish.
INSL-X Stix Acrylic Waterborne Bonding Primer
Dry time is longer than water based at 3-4 hours but still quicker than oil based primers. Best cabinet surface to use on: This primer is excellent at covering very slick, plastic, melamine or laminate cabinet surfaces.
Using the correct primer is key when it comes to painting laminate. You have a few options to choose from, so make sure you choose a primer that made to adhere to laminate and glossy surfaces without sanding. For this project we used Zinsser BIN. Other options include: Kilz Adhesion, and Zinsser Bullseye 123.
Since laminate or most IKEA furniture has a high gloss smooth finish you'll need to start with a primer. Not just any primer will do, it needs to be Zinsser BIN Shellac-Based Primer because it is a shellac based primer and a water-based or oil-based primer won't hold.
A: Like most rules, there's always an exception, so YES, you can paint laminate furniture without sanding or priming IF you use the right kind of paint. You can skip the primer if you are painting laminate furniture with chalk paint.
The best way to ensure paint on laminate lasts is to sand the surface and use a good bonding primer, followed by two layers of high-quality latex paint and a durable top coat – allowing each layer to dry thoroughly before adding the next.
Clean the laminate furniture with Krud Kutter to remove all of the dust and any grease or oil from the surface. Repair any scratches or chips in the laminate. Prime with a shellac based primer. Let primer dry before painting.
The first step is the trick to painting laminate. It's not difficult, but to create a base for the main paint to stick to you'll need to prime the furniture first. The best primer to do that is Zinsser BIN Shellac-Based Primer.
It's easy to skip the sanding step, because sanding is a drag… but it's especially important with laminate. Because it's often somewhat glossy-looking, and important to sand it down until the finish is very dull before priming. We recommend using 120 grit sandpaper for this.
I always use Kilz primer for laminate and have had great luck with it. For painting laminate furniture, you want to do at least 2 coats of primer and let them cure completely (overnight if you can!) in between coats. You can even sand in between coats for maximum adhesion.
And, with that final layer of topcoat dry, you've given a fresh new look to an old laminate countertop. The painted surface is durable, but not quite as resistant to water and scratches as the laminate, so be sure to wipe up spills quickly and avoid scratching the paint as much as possible.
Go for a self-priming paint that's formulated for use on glossy, laminate surfaces. This cuts out the need for special primers, reducing both expense and time. Frenchic's Al Fresco range, Lazy Range and Trim Paint are the ideal solution.
Painting laminate wasn't difficult, but I did find it more time-consuming than painting wood. To sum it up, the most important steps are to sand and prime all the surfaces before painting. If you were to skip those two steps, your paint would have nothing to adhere to and would most likely peel right off.
Using 120-grit sandpaper, lightly sand the laminate surface in a circular motion. Don't worry if the furniture starts to look a little dull and less glossy, this is what you want to happen. Avoid sanding too much or you might tear up the laminate from the surface, or even make a hole.
If you want to make a big impact in your kitchen without a big investment, consider priming and painting your laminate countertops. Your local paint store can supply you with the best type of paint to use in this project. Many recommend a water-based acrylic primer, paint and top coat.
Zinsser® B-I-N® Shellac-Base Primer is a primer-sealer/stain killer/bond coat recommended for application to interior ceilings, walls, doors, trim, cabinets, furniture and related paintable surfaces. Exterior uses are limited to spot priming only.
Zinsser® Bulls Eye 1-2-3® is a high performance, universal water-based undercoat primer-sealer/stain blocker/bond coat that combines fast dry convenience with excellent adhesion and stain blocking power.