Dilute white vinegar with water in a bucket, at Walmart (a 50:50 solution is fine), and apply this natural, eco-friendly cleaning solution to the paving slabs with a firm brush and rinse thoroughly.
Vinegar can be applied directly or in a 1:1 ratio with water. In the case of bicarbonate soda, dissolve 1 to 5 tablespoons in 10 litres of water, depending on the degree of soiling. The mixture must now soak in for 15 to 20 minutes. The patio is then cleaned with a scrubber and finally rinsed with clean water.
In fact, one of the most effective patio cleaning products is good old-fashioned washing-up liquid mixed with warm tap water.” “White vinegar is also safe to use as a patio cleaner – in fact, it has many benefits as it is environmentally friendly, non-toxic, and non-chemical.
'A homemade cleaning solution for your patio can be made by mixing equal parts water and white vinegar,' says Zak. 'This natural cleaner is effective in removing dirt, mildew, and algae. For stubborn stains, you can add a few drops of liquid dish soap to the mixture. '
Wash patio slabs with white vinegar
White vinegar is great at lifting stubborn dirt and household stains, and it can even be repurposed in your garden too. This eco-friendly solution should be made with equal parts white vinegar and water and left to soak into the patio to correct discolouration and remove tough marks.
Pour your vinegar and water solution over your patio (you may need several buckets) and leave the vinegar to work its way into the paving slabs for 30 minutes to an hour. Once the time is up, follow the soapy water method from step 4 onwards.
Grab your bucket, cover the base with fairy liquid, and fill it with plenty of warm water. Starting in the corners, splash some water, take your brush, and scrub. It doesn't have to be done with a lot of pressure, just enough so that you begin to see the dirt lift away.
Vinegar or baking soda: These natural cleaners work well to clean cement patios with stubborn charcoal or rust spots. Mix equal parts vinegar and water, scrub the patio with the mixture, then give it a good rinse. If stains don't dissolve, try undiluted vinegar.
Alternatively, the patio can be cleaned with home remedies. For example, you can use soap diluted in warm water or make your own cleaner. All you need is a little bicarbonate soda or vinegar. However, before you get to work, it is advisable to test the cleaner on an inconspicuous part of the patio.
Cleaning a patio with bleach is easy.
Whether your patio is sealed concrete or cement, or even sealed concrete pavers, a bleach and water solution makes it easy to clean away built up soil, stains from leaves and pollen, mold, mildew and algae.
Bartoline Sugar Soap will cut through grease and grime, including nicotine stains, and makes repainting easier. May be used inside and outside. May be used for cleaning building exteriors. Will remove old paint stains from masonry, facing slabs and stonework.
Contrary to popular belief, you don't need any fancy products to clean a patio without a pressure washer. In fact, one of the most effective patio cleaning products is good old-fashioned washing-up liquid mixed with warm tap water.
Baking soda is an effective cleaner, and can help remove dirt and staining from your paving slabs.
The Pink Stuff Cream Cleaner has received internet acclaim not just for what it can do inside the house, but for yard pavers and patios too.
White Vinegar and Water: A more natural way to touch-up your concrete pavers or paver stones is to use a mixture of water and white vinegar. Let the vinegar mixture sit on the pavers for about an hour before using soap and water to scrub away any stains.
When baking soda is mixed with vinegar, the acid breaks down baking soda, releasing carbon dioxide gas that can help lift dirt from the surfaces being cleaned. Here are some recipes to try. Freshen your sink by mixing one part of baking soda with two parts of vinegar.
Use a specialist cleaner
Try a specialist cleaner like Wet & Forget, at Walmart, which you spray onto the surface of the paving and leave. It can also be used on steps, fountains, patio umbrellas and other smaller outdoor areas. It's bleach-free and non-acidic but will remove mold, moss and grime without any scrubbing.
Make this simple homemade patio cleaner to get your concrete or pavers looking brand new. Make a paste with two parts of baking soda to one part of vinegar. Spread the paste on the patio surface and scrub with a brush (we like a long-handled one so you don't have to bend over).
Sugar soap is great to use as a de-greaser to lift light oil and grease stains from concrete – you know, the ones that appear in your garage or driveway that you're at a loss to do something about? Just the sugar soap, neat or diluted, then scrub the surface to a lather, and rinse clean.
Make up a 50:50 vinegar and water solution, and apply to the paving – using a watering can will help you get even coverage. Leave the solution to soak for around 20 minutes, then use a stiff brush to remove stains. Once you're done, mop with clean water. Leave to dry before you put anything back on to the patio.
For best results, it's recommended one mixes biological washing powder with warm water in a bucket to create a foamy solution. You can then pour the mixture directly onto the patio slabs, allow it to sink into them, and scrub off the softened dirt using a hard-bristled brush.
Use a mild grease-cutting detergent such as Dawn or Ajax dishwashing liquid mixed with water and a natural or synthetic bristle scrub brush to help brighten the patio surface. NOTE: Never use a wire brush as it can leave rust stains and scratch the concrete surface.