The answer might surprise you: dish soap. Yes, that's right. Dish soap can be your savior when it comes to unclogging toilets quickly and efficiently. Simply pour some dish soap into the clogged toilet bowl and let it sit for about 10-15 minutes.
Use Baking Soda and Vinegar
Baking soda and vinegar have the power to cut through grime for ordinary cleaning and also can tackle clogs that are out of sight. Measure one cup of baking soda and pour it into the toilet. Then, pour two cups of white vinegar onto the baking soda to create a chemical reaction that fizzes.
A manual drain snake, also known as a plumber's snake or a drain auger, is a small boring tool that rotates slowly as it's physically pushed through a stubborn clog. The terminal end of the device is a corkscrew-shaped hook that is fed into a clogged drain or toilet.
For preventive drain cleaning, you can use Drano® Max Build-Up Remover in drains, toilets and even septic systems. Apply Drano® Max Build-Up Remover overnight or before you go to work, then wait 6 to 8 hours before running warm (not hot) water down treated drains or flushing treated toilets.
Bleach is an effective way to deal with blocked toilet drains as it is a dilute solution of sodium hypochlorite and also contains a high chlorine concentration. Using bleach by itself or mixing it with boiling water are effective ways to unclog a toilet.
As it turns out, you can actually unclog a toilet with dish soap instead of turning to a harsh, toxic bowl cleaner. Just as natural dish soap helps break down dirt, grease, and food that may be stuck on dishes and utensils, it can help break down what's in your toilet bowl.
Can I use Liquid-Plumr® products in my toilet? No. Liquid-Plumr® products are not designed to remove the waste that may be clogging your toilet.
Coke or Pepsi are great for vanquishing a clog! Everyone's heard about how a nail will dissolve in a glass of coke over time, and although most of us know this is a stretch, coke is arguably better than many commercial chemical clog removers because of its strong dissolving agents!
You may be surprised to learn that pouring soda down the drain does work for some clogs. To be specific, you need a dark-colored cola (such as Coca-Cola or Pepsi). This type of carbonated beverage usually contains a good amount of phosphoric acid, which given enough time, can eat away at some types of clogs.
Blocked Toilet Vent
The toilet vent allows fresh air to enter your home's plumbing system, which increases the pressure of flushes. If a toilet vent becomes blocked, the toilet loses flushing pressure. With poor pressure the toilet keeps clogging more frequently, and clogs become a consistent problem.
In this scenario, squeezing liquid hand soap, body wash, or shampoo into the toilet should net you the same results. STEP 2: Let the soap sit for about 20 minute so it can coat and loosen the clog for maximum flushability.
4 ounces over three days
Simply flush 4 ounces of Drano® Max Build-Up Remover down the toilet for three consecutive days. Do this before leaving for work or going to bed, as it's best to avoid flushing your toilet for 6-8 hours after each treatment.
It is Extremely Corrosive For Your Drains
When your pipes are clogged, Drano will sit on top of the clog, continually reacting and generating heat until the clog dissolves. This can put a great deal of stress on your drains as the heat can cause PVC pipes to soften and even break or collapse.
Drano® Liquid Drain Cleaner starts working to unclog your drain on contact. After 15 to 30 minutes, clogs are substantially minimized or dissolved. A final blast of hot water flushes away what's left of the clog.
One of the most popular methods of unclogging a slow draining toilet is using hot water and liquid soap. Pour the boiling water into the bowl and then add the liquid soap. Let it sit for about 15 minutes before flushing.
Several gentle pumps will usually work better than a couple of hard pushes. If your clog is going to come out, it should happen in less than 10 minutes. If not, it's time to move on to a snake or call a plumber.
Add baking soda to the mix
Pour one cup of baking soda into the bowl and add two more cups of vinegar; the mix will start to fizz. Leave it like that for ten minutes without flushing.
Using a solution of baking soda, vinegar, and hot water
For more stubborn clogs, a combination of baking soda, vinegar, and hot water may do the trick. Because vinegar is an acid and baking soda is a base, mixing the two will cause a chemical reaction that will create pressure and possibly dislodge the clog.
Using a snake is also more invasive and time-consuming than using a chemical cleaner is, and can often become a dirty job. When it comes to getting at and removing major clogs or clogs that are deep down in your pipes, however, a plumber's snake is your best bet.
Because of its corrosive nature, Drano can cause toilet bowls to crack, PVC pipes to melt or break and the glue that holds pipes together can be eaten away. If any of these things happen, you're going to be left with an inoperable plumbing system and costly repairs.