Usually, hosing them down once a month is sufficient. Use soap and water, if the pavers are still dirty after sweeping and water hosing, make a solution of soap and water. You can use dish soap, laundry detergent, or any type of general-purpose cleaner. Never use bleach on your pavers, as it can damage the surface.
There are useful tools for cleaning paving stones, such as joint scrapers, sweepers, and pressure washers. In addition, pavers can be cleaned with a small pickaxe, broom, and garden hose.
Water and mild dish soap is a popular cleaning solution because it's easy to find at home and it won't damage brick, but it will tackle stains. The BIA recommends using hot water for surface cleaning with a detergent. White vinegar and water, another common household cleaner, can also be used on mildew.
To clean paver slabs, you can use a detergent, such as Dawn, or a vinegar-water solution that is gentle enough to effectively clean without causing damage to your concrete pavers.
Use a specialist cleaner
Try a specialist cleaner like Wet & Forget, at Walmart, which you spray onto the surface of the paving and leave. It can also be used on steps, fountains, patio umbrellas and other smaller outdoor areas. It's bleach-free and non-acidic but will remove mold, moss and grime without any scrubbing.
White vinegar is good for cleaning pavers, though it's also acidic enough to erode the stones' surface. Diluted vinegar can be used safely to clean paving stones, though it should be used sparingly and infrequently to protect your paving from damage.
If vinegar does not do the trick, you can also try mixing about a cup of bleach for each gallon of water and using this as your mold-killing spray solution.
Cleaning your pavers with bleach has a lot of benefits: Disinfecting the Surface: Bleach is an effective disinfectant and can kill any bacteria or mold on the surface. This will help to prevent any health hazards from occurring. Removing Tough Stains: Bleach is also effective in removing tough stains from the surface.
If you're going the DIY route, all you need to do is grab a large bucket and combine warm water with a mild degreasing dish detergent. Stir the solution well, then evenly distribute the solution over the pavers. Do not use acid-based cleaners as this can damage the seal.
Simple Green is one of the best cleaning products for dirty pavers. It doesn't have any harmful chemicals that could possibly warp your precious driveway. Less chemicals mean there's a less likely chance your paver stones will change to a weird-looking color.
'A homemade cleaning solution for your patio can be made by mixing equal parts water and white vinegar,' says Zak. 'This natural cleaner is effective in removing dirt, mildew, and algae. For stubborn stains, you can add a few drops of liquid dish soap to the mixture. '
OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout. This concentrated solution provides excellent cleaning without leaving residue.
If your deck is made from concrete, pavers travertine, brick, stamped concrete or composite decking, you can clean and refresh it for summer using OxiClean™ Versatile Stain Remover.
Baking soda has low-abrasive properties, making it an excellent cleaning material for stuck-on grime and tough stains. Additionally, baking soda is absorbent, allowing it to absorb oils from the surface of the pavers, especially freshly oil spill on concrete pavers.
In the same way that baking soda can be a spot treatment for black algae, household borax does the same for blue and green algae. Simply use the borax to scrub away algae that's sticking to your pool walls, then use the brush to dislodge it. Follow up by vacuuming up or scooping out the free-floating algae.
Only algaecides can "kill" algae in pool water. However, baking soda can help clear up algae. Use both so you can restore sparkly, clean water!
If you have an algae problem, your best friend is white vinegar. White vinegar can quickly kill algae but is not harmful to birds, insects and the majority of plants.
Although bleach is great at the whitening effect, you can use peroxide to achieve this. Hydrogen peroxide is an oxygenated bleach. It is safe for plants, so when you rinse this solution, it won't harm anything. It works together with the dish soap and baking soda to remove dirt and whiten dirty concrete.
Can you power wash pavers? Power washing (also known as pressure washing) is also a very effective method by which you can remove dust deposits and various stains from your pavers. Just make sure that the water jet is not directed directly at the joints between the paving stones.
Will Vinegar Damage Pavers? Yes, vinegar is NEVER safe to use on pavers. It can cause a lot of damage, and you may have to replace a lot of the pavers if you try this. I know that vinegar is often used for household cleaning projects, but when it comes to your patio, it's a big no!
Scrubbing Brush and Bucket
Ahhhh the good old-fashioned scrubbing brush. It's been around for such a long time as it genuinely works. When those bristles are passed over the target surface vigorously enough, it'll remove most dirt and stains.
Use a detergent such as Dawn or Ajax dishwashing liquid mixed with water to brighten a concrete patio that hasn't been cleaned in a while. Just as you would regularly vacuum the floor and dust your furniture inside your house, you should keep your patio clean so it's ready at a moment's notice to entertain.