“Things like white vinegar, baking soda, and dishwashing soap can do just as good of a job and are more cost-effective.” Baking soda is an especially great solution for removing rust and soap scum—especially around faucets.
Pour 1 cup of baking soda followed by 1 cup of vinegar into the toilet bowl. Let it sit for 30 minutes, then flush. This can help break down buildup and prevent clogs. Combine equal parts of baking soda and vinegar to create a natural toilet cleaner. Let it sit for a few minutes before scrubbing with a toilet brush.
Spray bathroom cleaner all over the counter and scrub with sponge. Wipe all the product away with a microfiber towel and use a second dry towel to shine the sink tap. Clean the mirrors with a foaming glass cleaner and a dry towel or newspaper. Clean the shower from cleanest to dirtiest, starting with the glass doors.
Use a shower/tub cleaner or an all-purpose solution to gently scrub dirt and grime from the shower or tub surfaces and rinse. If you have a glass door, wipe it down with a glass cleaner. Why: Soap scum and grime build up quickly, making the shower or tub less hygienic and visually unappealing.
She cut a small hole cut in the bottom so Fabuloso slowly flowed into the tank and mixed with the water. After every flush, the bowl refilled with Fabuloso-infused water, a practice she claimed kept her toilet clean and fresh smelling.
Vinegar and baking soda: Add 1 or 2 cups of vinegar to the toilet bowl along with a few sprinkles of baking soda. Swish the solution around the bowl with your brush for a few minutes and then let it sit for about 15 minutes. Scrub the stains with your brush (or pumice stone).
Consider using Bon Ami, Bar Keepers Friend, or The Pink Stuff, which are commercial cleaners that work well to remove toilet bowl rings.
Yet, hydrogen peroxide is one of the best shower cleaners used by professionals. All you need is a toothbrush and a bottle of hydrogen peroxide. Before using any chemicals, scrub the grout with water to dislodge loose debris. Rinse thoroughly, and then go in with the hydrogen peroxide.
Moss, Mold, Mildew & Algae Stain Remover
Simply spray and walk away! That's it. Wet & Forget goes to work with the wind and rain to gently clean the surface over time. NO RINSE: Easy Spray & Leave Application. EFFORTLESS CLEAN: No Scrubbing, Rinsing or Pressure Washing.
The flat-head microfiber mop. That's right! It's time to toss out every other floor mop you have ever owned and you'll soon know exactly why! This floor mop is what the pros use in almost every case and there are many reasons why.
Mineral Deposits (including limescale): Use vinegar, a pumice stone, or a commercial cleaner designed for mineral deposits to remove them. Dye Stains: Flush immediately and scrub with a toilet brush. For set-in stains, try a baking soda paste or diluted bleach.
The hydrogen peroxide in Clorox ® Urine Remover breaks down the odor at its source through oxidization and removes uric acid crystals. Surfactants, solvent and a low pH work together to clean urine stains from porous grout and other difficult surfaces.
Vinegar and Baking Soda
Pour a cup of vinegar into the bowl, then mix it around with a toilet brush. Add a cup of baking soda to the coated areas and immediately follow up by adding another cup of vinegar. Wait about 10 minutes to allow the baking soda and vinegar to interact, creating that effective fizzing action.
Vinegar and baking soda produce that oh-so-familiar chemical reaction that powers through buildup and loosens tough stains. While it might seem like it's chewing its way through grime, it's not powerful enough to damage the porcelain finish of the toilet bowl.
Baking soda is a classic method of removing hard water stains from a multitude of surfaces. Simply mix baking soda and water until you have the consistency of a paste, and then apply the paste to the surface with water stains. Let it sit for 15 minutes, and then scrub it gently with an old toothbrush or sponge.
We recommend using a mixture of ¼ cup of vinegar for every 1 cup of water. This ensures your toilet tank is being disinfected without causing damage, which the use of bleach or chemical cleaners can do.
According to EPA, the illegal Fabuloso products contain an active ingredient, glutaraldehyde, that is not authorized in the U.S. as a household disinfectant, because of potential health risks, including throat and lung irritation, asthma and difficulty breathing, dermatitis, nasal irritation, sneezing, wheezing, ...
Black particles in the toilet bowl water
The black particles are likely the result of the disintegration of the float in the toilet tank. The float is especially likely to break down over time if you use an automatic toilet bowl cleaner in the tank. Replace the float or call a plumber about replacing the float.
Professional cleaners often use the same household supplies as you would: toilet-bowl cleaner (or bleach), disinfectant wipes, rubber gloves, as well as a nonscratch scrub sponge, a microfiber cloth, or paper towels. A handheld scrub brush or a pumice stone can get to especially tough stains.
White vinegar
The mild acid can dissolve limescale and disinfect. All you need to do is pour a generous amount of white vinegar down your toilet bowl, let it soak in overnight, then scrub with a brush. Then flush to rinse, and voilà, your toilet is back to its former whiteness!
Pour one cup of baking soda into the toilet bowl, followed by two cups of white vinegar. The mixture will fizz and bubble – a sign that the cleaning magic is happening. Let it sit for about 10 minutes to break down stains and kill germs.