Clorox Tilex Mold and Mildew Remover Bathrooms—showers in particular—are notorious for housing all kinds of mold due to its damp and dark environment. To completely eradicate this issue and prevent it from coming back, we recommend the Clorox Tilex and Mold and Mildew Remover as our overall best pick.
Chlorine Bleach is widely recognized as the absolute BEST cleaner to get rid of mould.
Hydrogen peroxide, white vinegar, and baking soda are three nontoxic products that can remove mold in shower areas effectively. Hydrogen peroxide is naturally antifungal and antibacterial, which makes it perfect for treating mold. Baking soda also kills mold and absorbs moisture that facilitates mold growth.
Yet, hydrogen peroxide is one of the best shower cleaners used by professionals. All you need is a toothbrush and a bottle of hydrogen peroxide. Before using any chemicals, scrub the grout with water to dislodge loose debris. Rinse thoroughly, and then go in with the hydrogen peroxide.
Hydrogen peroxide, commonly used to disinfect wounds, is active against a wide variety of micro-organisms including mold. It acts by releasing oxygen at a rapid rate, which kills mold by oxidizing the surface and breaking down proteins and DNA.
Vinegar is better at killing mold because it can work on both porous and nonporous surfaces. It also terminates molds at their roots so the mold won't return and is also safer than bleach. You can even combine it with baking soda to make it more effective.
To begin, Coca advises that the bathroom should be well-ventilated and that anyone tackling this yucky stuff wear gloves. “Cleaning practices to effectively remove pink mold include using a solution of one part vinegar to one part water, or for more stubborn cases, a bleach-based bathroom cleaner,” she says.
For tougher calcium or limescale build-up, a half water and half CLR mixture on a sponge will actively work to dissolve the stains. Repeat as necessary for excessive build-up of calcium, limescale or rust stains. CLR will work to dissolve the build-up layer by layer until it is all removed.
Equipment Used in Mold Remediation
Air scrubbers play a crucial role and filter out mold spores from the air, ensuring a cleaner environment. HEPA vacuums are also vital, adeptly removing mold particles from surfaces. To detect hidden mold, we use moisture meters, pinpointing damp areas prone to mold growth.
For stubborn mould growths, you can try mixing baking soda with bleach. These are two of the most potent household disinfectant agents, and they should be able to remove all fungal growth. Again, don't forget to wear your safety gear before starting, as the solution will give off strong fumes.
Mopping up water, wiping down damp surfaces, and removing dirt all make it harder for fungi to grow. Dry it out. Mold and mildew need moisture to take hold. Keep your bathroom ventilated, especially during and after steamy showers.
Bleach is the most effective method for removing mold from shower grout. Method One: Make a solution of one-part bleach and four-parts water, and put it in a spray bottle. Spray the affected area and scrub with a brush after 30 minutes. Rinse with water and repeat if necessary.
A 50-50 mix of Dawn dish soap and vinegar effectively cleans showers by breaking down soap scum, and hard water build-up on tubs and showers. Spray the solution on the surface you want to clean, let it sit for 15 to 30 minutes, and wipe clean.
A pro tip for cleaning pink mold in your shower is to let a 1:1 vinegar solution sit for at least 15 minutes before scrubbing. This helps to disinfect the area and kill the bacteria cells causing the pink mold.
Vinegar is an effective and natural way to kill black mold in your shower. Simply mix equal parts vinegar and water in a spray bottle and mist the affected areas. Let the solution sit for an hour or two before scrubbing away the mold. Repeat this process as needed to keep your shower mold-free.
To effectively eliminate pink mold, you can create a mixture of bleach and water in a 1 to 1 ratio. This solution works well for cleaning and disinfecting surfaces affected by mold, including pink mold commonly found in showers and on tiles.
Fill a spray bottle with white vinegar and spray the solution on the walls and doors, allowing it to soak for at least 10 minutes. For heavy buildup, let it soak for longer. Use a scrubbing sponge dipped in baking soda to scrub the glass.
It Can Clean Lots of Things, but Not Everything
But for hard, non-porous surfaces like stainless steel, porcelain, ceramic, or glass, go for it! In addition to pots and pans, you can use Bar Keepers Friend to shine up your cutlery or serveware, your copper mugs for Moscow Mules, or even the inside of your microwave!
Chemical or Natural Mold Cleaners
Use undiluted white vinegar on hard surfaces in kitchens and baths. Apply it directly to the mold. Make a bleach solution to kill mold. Mix one cup of bleach in a gallon of water.