To clean smaller surfaces areas, pH-neutral soap, a little water, and a brush are suitable. If you want to clean larger areas of natural stone efficiently, you can reach for the electric patio cleaner or work with the pressure washer and a surface cleaner.
Clean stone surfaces with warm water and a mild soap such as a clear Dawn Liquid Soap. Do not use products that contain lemon, vinegar or other acids on marble or limestone.
Acidic commercial cleaners and those containing harsh chemicals, like bleach, can damage and dull natural stone surfaces.
Clean stone surfaces with a few drops of neutral cleaner, stone soap (specific products from Lithofin for example), or a dishwashing detergent and warm water. Use a clean soft cloth for best results. Too much cleaner or soap may leave a film and cause streaks.
It's essential to only use cleaners which are appropriate for natural stone surfaces. This means avoiding using vinegar. Stones like limestone, marble, or travertine will react to vinegar because it's an acidic cleaner with harsh effects.
Apply a paste of baking soda and water over the stain and leave it for 24 hours. Gently scrub the area and rinse it with plain water. Stains on Sandstone pavers, Travertine floor tiles, and Marble floors can easily be cleaned with a baking soda solution.
DON'T: Use harsh or abrasive cleaners and sponges.
Windex; acidic cleaners, like vinegar, lemon, lime; or anything with ammonia or bleach should be avoided. Frequent use of these chemicals will dull and weaken the sealant over time.
One of the best things for household stains is white vinegar, and the same can be said for how it targets stubborn garden dirt. This eco-friendly solution is made up of equal parts vinegar and water, which is then left to soak into the patio to correct any discolouration and also remove tough marks.
A paver sealer will help to protect the pavers from weather damage, stains, and general wear and tear. It can also make the pavers look shiny and new again. Paver sealers come in different types, so be sure to read the labels carefully before purchasing one.
Maintenance and Cleaning of Natural Stone Surfaces
Marble and granite are easier to maintain than you'd expect. Warm soapy water and a soft cloth will clean and shine on both surfaces. You can also clean with a stone specific cleaner formulated to be gentle and effective on stone surfaces.
To maintain the luster and shine of your natural stone, use a stone-safe polish about once a week. To polish stone, simply spray the polish directly onto the surface, then buff the surface until it's dry with a lint-free cloth or dry paper towel.
And in this case, this mixture does not work well with the natural stone countertops. Due to the fact that vinegar is acidic substance and baking soda is caustic, the result of mixing the two can have an unstable effect on stones that are porous.
Simple Green Granite & Stone Polish is safe for use on granite, marble, travertine, limestone, porcelain, ceramic, quartz, Corian®*, Silestone®*, and other natural and engineered stone surfaces.
Magic Erasers are bad for natural stone surfaces
Magic Erasers will damage your natural stone countertop or even your floor. If you have polished marble or granite countertops, or even natural stone tile, don't use a Magic Eraser to clean it, according to Countertop Specialty.
Products that should never be used on these types of stones include vinegar, Scrubbing Bubbles, Tilex, Comet, etc.
Rinsing is not necessary! If you're simply using a vinegar and water solution to wipe and disinfect, you won't need to rinse. However, if there's also plenty of dirt and grime you're wiping away, you may also want to rinse with some extra water.
Dawn & vinegar works better than store-bought cleaners.
I've tried myriad cleaners specifically for bathrooms~from Rain-X to scrubbing bubbles and beyond. I've never had any store-bought cleaner work better than this easy, inexpensive, DIY Dawn vinegar solution.
Keep It Simple to Clean Natural Stone
You can use any type of mild soap detergent, such as dish or hand soap, and mix it with a little water. Wet the stone first, and then use a bristle brush and soap solution to wipe the stone clean. The last step is to make sure you rinse thoroughly.
Using a sealer on natural stone helps to protect it against stains, while also giving you a little extra time to clean up any spills that may occur on your surface. It's important to note that while sealant does provide an extra barrier for your stone, everyday wear and tear will often still cause it to etch.
Magik Polish Powder is ideal for polishing marble, granite, and limestone as it restores the surface's original gloss while unifying its aspect by removing dull itchiness, watermarks, and surface scratches. A great benefit is that the Magik Polish Powder is an easy-to-use product.