Dish Soap: A great way to clean patio pavers without removing any sand or decorative texture is by simply cleaning with a gentle soap or degreaser like Dawn. Add the dish soap to a container of water, then start lightly scrubbing the dirty spots with a rag, sponge or a stiff-bristled brush.
Usually, hosing them down once a month is sufficient. Use soap and water, if the pavers are still dirty after sweeping and water hosing, make a solution of soap and water. You can use dish soap, laundry detergent, or any type of general-purpose cleaner. Never use bleach on your pavers, as it can damage the surface.
A solution of household bleach diluted 10:1 with water (10 parts water) can be used to remove many types of stains. Some of these include beverage stains, leaf, wood rot, and tobacco stains. Always test a small section of your patio before covering a large area.
Use a specialist cleaner
Try a specialist cleaner like Wet & Forget, at Walmart, which you spray onto the surface of the paving and leave. It can also be used on steps, fountains, patio umbrellas and other smaller outdoor areas. It's bleach-free and non-acidic but will remove mold, moss and grime without any scrubbing.
To clean paver slabs, you can use a detergent, such as Dawn, or a vinegar-water solution that is gentle enough to effectively clean without causing damage to your concrete pavers.
White vinegar is good for cleaning pavers, though it's also acidic enough to erode the stones' surface. Diluted vinegar can be used safely to clean paving stones, though it should be used sparingly and infrequently to protect your paving from damage.
It is common to mix bleach with water; however, you can also add other ingredients to make it more effective. Avoid an intense concentration of bleach, as it can damage the pavers.
Simple Green is one of the best cleaning products for dirty pavers. It doesn't have any harmful chemicals that could possibly warp your precious driveway. Less chemicals mean there's a less likely chance your paver stones will change to a weird-looking color.
OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout. This concentrated solution provides excellent cleaning without leaving residue.
Mild detergent and water. If your pavers aren't too dirty, this can be a quick and easy way to clean them without any fancy equipment. Mix some mild dish soap with water in a bucket to create suds, then use a brush or a sponge to scrub the surface of the pavers.
Baking soda has low-abrasive properties, making it an excellent cleaning material for stuck-on grime and tough stains. Additionally, baking soda is absorbent, allowing it to absorb oils from the surface of the pavers, especially freshly oil spill on concrete pavers.
Use Vinegar or Bleach
If you are going to try this approach to remove mold or algae, first try a mixture of white vinegar and water to spray down the area and kill the mold.
Can you power wash pavers? Power washing (also known as pressure washing) is also a very effective method by which you can remove dust deposits and various stains from your pavers. Just make sure that the water jet is not directed directly at the joints between the paving stones.
Simple Green Oxy Solve Concrete and Driveway Cleaner can be used with a power washer or for manual cleaning of concrete surfaces including driveways, sidewalks, patios, and walkways.
Acidic cleaners: Harsh, acid-based cleaning products and stain removers can damage the seal and finish of your concrete pavers. Bleach: This alkaline solution may be effective for other household uses, but it can discolor concrete pavers that have been colored or stained.
Although bleach is great at the whitening effect, you can use peroxide to achieve this. Hydrogen peroxide is an oxygenated bleach. It is safe for plants, so when you rinse this solution, it won't harm anything. It works together with the dish soap and baking soda to remove dirt and whiten dirty concrete.
Will Vinegar Damage Pavers? Yes, vinegar is NEVER safe to use on pavers. It can cause a lot of damage, and you may have to replace a lot of the pavers if you try this. I know that vinegar is often used for household cleaning projects, but when it comes to your patio, it's a big no!
Dish soaps are ideal for this job. While they feature surfactants that are able to remove tough grime like oil and grease, they are also safe enough to use on paving stones without compromising their integrity or appearance.
Try Concrete Stain
The simplest path to reviving tired pavers is to apply an acrylic-based semitransparent concrete stain, such as Behr Premium Semi-transparent Concrete Stain ($27/gal.; Home Depot) or Valspar Semi-transparent Concrete Stain ($28/gal.; Lowe's).
Salt should not be applied to walks or patios, regardless of whether your walks and patios are natural stone, pavers, or concrete because salt will damage all surfaces other than asphalt. So, you wonder, why is this and what should you use instead? We have the answers for you here.