Simple Green is one of the best cleaning products for dirty pavers. It doesn't have any harmful chemicals that could possibly warp your precious driveway. Less chemicals mean there's a less likely chance your paver stones will change to a weird-looking color.
There are useful tools for cleaning paving stones, such as joint scrapers, sweepers, and pressure washers. In addition, pavers can be cleaned with a small pickaxe, broom, and garden hose.
Use 8 Parts water to 1 part Hydrochloric acid solution, you may have to increase the strength if the marks haven't been removed, the stronger the solution the coarser the paver will become exposing the materials of the paver.
Dilute white vinegar with water in a bucket, at Walmart (a 50:50 solution is fine), and apply this natural, eco-friendly cleaning solution to the paving slabs with a firm brush and rinse thoroughly.
Cleaning your pavers with bleach has a lot of benefits: Disinfecting the Surface: Bleach is an effective disinfectant and can kill any bacteria or mold on the surface. This will help to prevent any health hazards from occurring. Removing Tough Stains: Bleach is also effective in removing tough stains from the surface.
To clean paver slabs, you can use a detergent, such as Dawn, or a vinegar-water solution that is gentle enough to effectively clean without causing damage to your concrete pavers.
Muriatic Acid breaks down a micron thick layer of efflorescence on the surface of your paving stones, so it's common to experience some colored standing water or foaming on your pavers. Don't worry! It's normal. After rinsing, your hardscape will look as good as new.
Use Vinegar or Bleach
If you are going to try this approach to remove mold or algae, first try a mixture of white vinegar and water to spray down the area and kill the mold.
If you are prepared to use chemicals to remove algae, lichen and moss from your pavers, it is important that you use plastic sheeting to protect other plants in the vicinity. A solution of one cup bleach to four litres of water should do the trick.
Unfortunately cleaning is not a one-size-fits-all process for pavers. For example, masons will use muriatic acid on clay brick to remove mortar. However, muriatic acid could do serious damage to a concrete paver.
Bondall Hydrochloric Acid is the solution for acid etching concrete, brick and pavers to adequately prepare the surface prior to sealing or painting.
Simple Green is one of the best cleaning products for dirty pavers. It doesn't have any harmful chemicals that could possibly warp your precious driveway. Less chemicals mean there's a less likely chance your paver stones will change to a weird-looking color.
OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout. This concentrated solution provides excellent cleaning without leaving residue.
A dish soap, like Dawn, is a safe place to start. The surfactants in dish soaps are designed to remove oil and grease, they're gentle enough to be used without issue on your pavers. In a bowl or bucket, mix the soap with water and pour it onto the stain and agitate. Rinse and repeat if needed.
If your deck is made from concrete, pavers travertine, brick, stamped concrete or composite decking, you can clean and refresh it for summer using OxiClean™ Versatile Stain Remover.
Over time, it can destroy concrete as the acid weakens its structure. This will cause scaling, pitting, peeling, and cracking. If the acid wash gets into the soil, it will evaporate on the surface but remain beneath the surface (just like it does with concrete).
Health Effects
Skin contact causes severe burns; repeated or prolonged exposure to skin will cause dermatitis. Muriatic acid is harmful if swallowed and may cause irreversible damage to mucous membranes; repeated or prolonged exposure to corrosive materials or fumes may cause gastrointestinal disturbances.
The acetic acid in vinegar is a little stronger than acid rain, so exposing your pavers to this substance can lead to bleaching, corrosion and the loss of protective sealant.
Depending on the material of the paver (non-coloured concrete is safe), CLR may be suitable. Always spot test in an inconspicuous area first. Make sure the pavers are not coloured, stamped, sealed or coated.
Can you power wash pavers? Power washing (also known as pressure washing) is also a very effective method by which you can remove dust deposits and various stains from your pavers. Just make sure that the water jet is not directed directly at the joints between the paving stones.
Although bleach is great at the whitening effect, you can use peroxide to achieve this. Hydrogen peroxide is an oxygenated bleach. It is safe for plants, so when you rinse this solution, it won't harm anything. It works together with the dish soap and baking soda to remove dirt and whiten dirty concrete.
Mix Solution of dish soap and water, and use a brush to scrub the pavers clean. Make sure to rinse the pavers thoroughly afterward. This process may need to be repeated for tough stains. A recommendation is to do this every few months.