If your water pressure seems low, the first step should be to test how much pressure you're actually getting from the shower head. A typical home's water pressure should be somewhere between 45 to 55 psi (pounds per square inch).
Differentiating Between Low Flow And High Flow Shower Heads
If you're looking for the most pressure, go for the 2.5 GPM Flow Rate, unless you are restricted because you reside in California, Colorado or New York. Again, this has been the Maximum Flow Rate since 1992. The step down from there in Flow Rate is 2.0 GPM.
Water pressure is measured in psi, or pounds per square inch, and represents the force at which water enters your home from the water main. Normal psi for a home pipe system is between 30 and 80 psi. While you don't want the psi to be too low, it violates code to be above 80.
If your showerhead is labeled 2.5 GPM or less, you have a low-flow showerhead. Any showerhead labeled 2.6 GPM or above is a high-flow showerhead. If your showerhead doesn't have a label, try this trick to determine the flow rate. Place a bucket or container with a 1-gallon marker under the showerhead.
GPM means Gallons Per Minute. Also known as "flow rate", GPM is a measure of how many gallons of water flow out of your shower head each minute. Since 1992, a maximum of 2.5 GPM is the federally mandated flow rate for new shower heads. This means no more than 2.5 gallons of water should flow out each minute.
If your flow rate is less than 10 litres per minute, you may have what is considered low water pressure. Anywhere between 10 and 15 litres per minute is acceptable but can be improved. A flow above 15 litres per minute is considered good.
Know the Impact. One person who showers 10 minutes per day with a 2.5 GPM shower head uses 9,125 gallons of water per year. Switching to a 2.0 GPM shower head saves more than 1,825 gallons of water and $25 per year in water and energy costs. Those numbers jump to 7,300 gallons and $100 in savings for a family of four.
Did you know that standard showerheads use 2.5 gallons of water per minute (gpm)? Water-saving showerheads that earn the WaterSense label must demonstrate that they use no more than 2.0 gpm.
To get back to the important question - yes, a showerhead can help increase water pressure, and it can also do so while consuming less water than your usual fittings. Showery showerheads are designed to increase water pressure so you can experience a more enjoyable shower.
Do different shower heads affect water pressure? Yes, depending on which shower head you choose, they can increase the water pressure at the head itself in order to create a more powerful shower or decrease it to create a more gentle shower.
Absolutely. Many low-flow shower heads still deliver a powerful, satisfying shower even with a reduced flow rate. If you're looking for a better showering experience that also helps you save water, we recommend checking out the 1.8-GPM shower head model from hai.
National standard of maximum 2.5 gpm flow rate for shower heads was established through the Energy Policy Act (EPAct) of 1992 in order to save water. If the state, county or city of residency does not specify a maximum flow rates for shower heads, a 2.5 gpm shower head is the maximum one can get.
It's measured in gallons per minute (GPM). The average household has a water flow rate of 6 to 12 GPM. Therefore, most households use roughly 100 to 120 gallons of water each day. There are a few factors that will affect the water flow rate in your home.
Leaky, corroded and clogged pipes can lead to low water pressure in the shower. The showerhead might be so old it needs to be replaced. The shower controls could also be responsible for flow issues.
If mineral deposits are stuck in a water supply pipe, they can disrupt the flow to your shower (or other faucets). Similarly, if you have a small leak somewhere in your plumbing, low water pressure could be a noticeable symptom. It's important to locate and fix the leak as soon as possible.
High water pressure: It feels great in the shower, but it may be costing more than you think. High-pressure water can cause serious problems, like pinhole leaks, in your plumbing, and it can severely shorten the life of your water heater, dishwasher, boiler system, and washing machine.
Find the spigot closest to your source of water. Make sure all the taps and other water uses are turned off in your house. Now turn on the spigot and see how long it takes to fill the bucket. Dividing the number 60 by the time to fill the bucket will give you the gallons per minute number.
Depending on your current flow rate, you may be able to increase the flow simply by removing the filter or restricting device or replacing the showerhead with a higher-flow model, such as increasing to a standard 2.5 GPM head. Before you change the showerhead, make sure that the new model is legal in your area.
A 2.5 gpm shower head will have a better pressure and shower experience than a 1.5 gpm shower head. A 1.8 gpm shower head would have a better pressure and shower experience than a 1.0 gpm shower head. Another drawback of low flow shower heads boosting the pressure is the temperature instability.
So if there is a shower running that uses 2 gpm, the washing machine which uses 3 gpm is running, and the kitchen sink is running at 3 gpm, which means 8 of 12 gallons are currently being used. This can often lead to lower “water pressure” because the flow rate simply can't keep up.
Do All New Shower Heads Have Flow Restrictors? Not all new shower heads come with flow restrictors. While many brands focus on water and energy efficiency, it's not a universal feature. So, before you make a purchase, it's a good idea to check the specifications and ensure they fit your needs.