Lipping (or edge banding) is used to cover the cut edge of veneered materials such as MDF and plywood. Lippings are commonly used on doors, worktops, cabinets and tables. They are generally glued on, although some lippings are supplied with a pre-applied thermo-setting glue that allows them to be ironed on.
Lipping is defined as the amount of overlap between two adjacent precast concrete pipes or culverts. Lipping is necessary to establish a secure connection between the two units by allowing one unit to fit into the other.
The lippings are the solid edges that border the bottom and both sides of the door, protecting the particleboard core inside. The lippings are usually around 12mm thick, and we recommend trimming a maximum of 8mm from each side.
Flitch (wood), a piece of wood for resawing into smaller pieces.
Snipe, in woodworking, is a noticeably deeper cut on the leading and/or trailing end of a board after having passed through a thickness planer or jointer.
Gullet size: The gullet is the space in front of each tooth, and its size and depth determine how much wood can be removed during cutting. In general, the fewer teeth a saw blade has, the faster its feed rate and the larger its gullet size.
Lipping (or edge banding) is used to cover the cut edge of veneered materials such as MDF and plywood. Lippings are commonly used on doors, worktops, cabinets and tables. They are generally glued on, although some lippings are supplied with a pre-applied thermo-setting glue that allows them to be ironed on.
Sill / Threshold
· The bottom or piece of a door. Usually made from aluminum or wood.
The majority of the oak doors that we supply have 20mm lippings which means that up to 15mm can be trimmed off each edge without compromising the integrity or guarantee.
Job Order Contracting (JOC) is an on-call construction services contract where construction work and performance is determined by issuing Work Orders with the contractor during a fixed period of time.
A pugmill, pug mill, or commonly just pug, is a machine in which clay or other materials are extruded in a plastic state or a similar machine for the trituration of ore. Industrial applications are found in pottery, bricks, cement and some parts of the concrete and asphalt mixing processes.
In construction, furring (furring strips) are strips of wood or other material applied to a structure to level or raise the surface, to prevent dampness, to make space for insulation, to level and resurface ceilings or walls, or to increase the beam of a wooden ship.
Typically made from hardwood, its primary job is to offer a first line of defence against the wear and tear brought by everyday use, helping to maintain both good looks and integrity.
The lipping protects the wooden panels in your furniture from moisture, therefore reducing the effects of atmospheric humidity and liquid spills. That means that the strength and durability of the wood increase.
The tympanum is the triangular area within the pediment, which is often decorated with a pedimental sculpture which may be freestanding or a relief sculpture. The tympanum may hold an inscription, or in modern times, a clock face.
In architecture, a baseboard (also called skirting board, skirting, wainscoting, mopboard, trim, floor molding, or base molding) is usually wooden, MDF or vinyl board covering the lowest part of an interior wall. Its purpose is to cover the joint between the wall surface and the floor.
a peephole or a very small window in a door. Also called: judas window, judas hole.
To get a perfectly square corner, you want to aim for a measurement ratio of 3:4:5. In other words, you want a three-foot length on your straight line, a four-foot length on your perpendicular line, and a five-foot length across. If all three measurements are correct, you'll have a perfectly square corner.
A mortice and tenon joint is generally recognised as the toughest around. As a result, they are sensible to use for commercial joinery projects. In simple terms, it allows two pieces of wood to be connected together.
Recent Examples of Synonyms for lipping. washing. bathing. splashing. lapping.
Cross-cutting wood or sawing plywood: Use a 40-tooth to 80-tooth blade. You can use a 40-tooth to 50-tooth general purpose blade as well. Joinery work: Use a 40-tooth to 50-tooth all-purpose combination blade. Cutting MDF and man-made materials: Use a 50-tooth to 80-tooth blade.
Kerf is defined as the width of a cut or width of a material that is removed by a cutting process.
Wheel chocks are wedges of plastic, wood, or steel that are placed against a vehicle's wheels to prevent accidental movement. It is important to use chocks to keep your trailer stable.