What are MultiPoint Locks? Multipoint locking systems are found on most uPVC and composite doors. They are the long strip which bolts in to the side of the door. It locks at multiple points along the frame, hence the name multipoint lock.
A multipoint locking system is a type of door hardware that locks at different points in the door — typically the top, middle and bottom. Instead of one deadbolt, it has three. The extra deadbolts bring additional security because it takes more force to break through a door that is locked at three different points.
Are Multipoint Locks Safe? Yes. Multipoint locks are known to provide over three times the typical level of security you would expect from a regular lock as they come with multiple deadbolts—up to three. It may well take more time and force to break through a door that is locked at three different points.
One of the most surprising benefits of the multipoint locking system is an increase in the energy efficiency of your entry door. While most homeowners think of locks as a safety measure, they also help keep your doors closed extra tight.
Break-In Prevention:
The main reason that most people choose a multipoint lock system is for security purposes. Multipoint locking systems provide three times the protection from break-ins compared to regular deadbolts and can be combined with other electronic systems to provide even more protection.
5 lever mortice deadlocks are a type of lock that is installed into the door material. The lock can be locked and unlocked using a key, and it has 5 levers to make it more secure. 5 lever mortice dead locks are available in a range of finishes, it can be used on both internal and external doors throughout a building.
Turn the thumbturn lock inside or use the key outside to unlock the door. To open the door, grasp the handle and push down, then operate the door. To engage the multipoint lock, close the door and lift up the handle.
Whereas in single-point locking, the door on a cabinet locks only at the point where the key is turned, halfway up the edge of the door, three-point locking enables the top and bottom of the door to be simultaneously secured.
Split spindle locking is visually the same as the lever handle locks, with a lever handle inside and out, the difference being the handles work independently of each other. PROS – If you close the door from inside it locks on the latch, so no one can enter.
Central rail key-operated lock
This is a multi-point locking system that's fitted to the central rail where the doors overlap. It's got a long, slim lock fitting. A central rail key-operated lock offers greater security than basic locks and could give you a discount on the cost of your home insurance.
Deadbolt door locks are the most secure type of key lock and are usually used on a home's exterior door. Available in single- and double-cylinder styles, deadbolts are rated according to their strength from Grade 1 to Grade 3.
How can you fix a uPVC door with a broken mechanism? Use a screwdriver to loosen the screws on the door handle. If this is too tight, it can pinch the spring and prevent the mechanism from working. By loosening this, you may be able to open the door.
What is the difference between a 3 lever and 5 lever lock? The difference between a 3 lever lock and a 5 lever lock is that a 3 lever lock is less secure because it has fewer levers which increases the risk of key duplication. Also, a 3 lever lock will NOT be BS3621 approved due to the poor security of the lock.
3 Lever Locks
The three-lever sash lock is designed for internal doors in domestic properties. These locks are best suited for doors needing to be locked for privacy purposes, but where high security is not required - it has fewer levers and therefore key duplication is much easier.
The 3 Lever Sashbolt Mortice Door Lock is a classically designed, low cost sashlock, which offers additional security for internal doors and outside applications such as sheds. The sashbolt is to be operated by a handle. Available in 64mm (2 ½") and 76mm (3") and in both brass effect and satin finishes.
By pulling the door closed, the sealing elements and the sturdy hook are triggered by means of a magnetic release on the frame and the door is secured against undesired entry. This ensures that the door always remains securely locked and remains firmly in its frame even without additional locking.
A 2 lever lock offers key differs between 18 and 20. This means that lock manufacturers make 20 different keys before they can start the process to duplicate the same 20 keys.
How does a lever tumbler lock work? A lever tumbler lock features a series of levers, normally three or five, that are pushed into the correct height to release a bolt. They typically use a bitted key which has a flat surface to push the levers into the correct position to allow the door to open.
For euro cylinder door locks that require a key, insert the key and turn slightly to line up the cam tongue and lock body. The lock can then be inserted into the door; a file can be used to shave down the hole if it is too tight whilst looking to replace a uPVC door lock or a wooden door lock.
ABUS Granit™: one of the world's most secure padlocks with a tensile resistance of over six tonnes. Granit locks have a tensile resistance of over six tonnes, making it almost impossible for attackers to release the shackle from the lock body by force.