Freon™ MO29 (R-422D) refrigerant is a low-toxicity, non-ozone depleting
R422D is quickly becoming a popular substitute for R22. R422D does not require changing out the oil! To learn more about R422D visit our landing page at http://stores.johnstonesupply.com/88/ and click on July's News "U" Can Use.
No 400-Series blend is a direct replacement for R-22. Mixing R-22 with a 400-Series blend, or mixing multiple 400-Series blends together, creates a new, untested refrigerant with unproven results. Use of alternative refrigerants voids all manufacturer warranties.
The information below will try to dispel some of these myths. Arkema recommends using Forane® 427A (R427A) - The EASY RETROFIT™ for your r-22 retrofit solution. When it comes to drop-ins, the truth is that there are none. The hope of “drop-in” refrigerants has become common over the years.
So… what refrigerant can be mixed with R-22? None. You can't mix refrigerants.
Since R410A refrigerant is charged under higher pressure, charging an R22 system with it will increase the force within the coolant lines. The pressure can become high enough for parts of the system to rupture. At the very least, leaks will occur. Mixing refrigerants is not an option either.
Mixing R22 with R407C
According to the 609 EPA rule, mixing refrigerants is illegal and anybody caught doing so will be heavily fined. Although you may this restriction is primarily political we would like to give you a basic education to explain the two most devastating effects of such action: To the environment.
No. Freon™ MO99 should not be used to top off R-22 systems. Mixing refrigerants is not recommended. R-22 should be recovered using appropriate equipment and managed according to U.S. EPA guidelines specified in Section 608 of the U.S. Clean Air Act.
Features and Benefits. Freon™ 407C has been a popular R-22 replacement because of its properties, which include: Similar cooling capacity, energy efficiency, and pressures as R-22 in systems. An ability to be topped off after a leak, multiple times, with minimal impact on system performance.
Explanation: A refrigerant that can be used as a direct service "drop-in" substitute for R-22 in a small appliance is R-407C. R-407C is a blend of hydrofluorocarbons (HFCs) that has similar thermodynamic properties to R-22, making it suitable for use as a refrigerant in systems designed for R-22.
In 2010, the U.S. stopped the sale of newly manufactured residential air conditioning units and heat pumps that use R-22 because of its particularly harmful impact on the ozone layer when released into the air. On January 1, 2020, the U.S. Environmental Protection Agency (EPA) banned the production and import of R-22.
An AC leak will lead to warmer air from your vents over time. In most cases this can be fixed with a proven stop leak additive to seal up any leaks. When it's time for an AC recharge, turn to AutoZone.
No, the compressor will fail. These two refrigerants have very different properties. One of R22 and R134a is high pressure and the other is low pressure. They don't mix chemically and don't have the same boiling point, leading to inefficiencies and eventual compressor failure.
Indeed, you can take that old supply of R-22 and make it into R-410A. The alterations will affect the air conditioning unit. Although they're both refrigerants, the higher efficiency of R-410A requires an upgrade to the equipment.
Of all the "no oil change" replacement refrigerants, Freon™ MO99™ offers the closest performance match to R-22.
As Freon was phased out, new HVAC systems began using a refrigerant known as Puron® or R-410A, an HFC. More efficient and less harmful to the environment, R-410A has been in use since its introduction in 1996 and is found in most of today's modern HVAC systems.
Freon™ MO99 refrigerant is a relatively affordable and eco-friendly alternative for R22 air conditioners. You can use it to revive older systems with little to no refrigerant charge, as well as systems that need replacement components. One of the best parts is that MO99 is a direct retrofit.
Never mix R-22 and R-410a. Unless of course you are looking to destroy your HVAC system, then, by all means, go live that dream.
What's a safer alternative to R22? All air conditioners and cooling equipment currently being manufactured use hydro-fluorocarbon (HFC) refrigerants. R410A is the most common, but others include R134a, R407C and R407A.
EPA regulations prohibit mixing different types of refrigerants.
R-407C should be used only in systems that currently use R-22. It should not be mixed with R-22 or any other refrigerant. 5. The capacity of the existing R-22 thermal expansion valve (TEV) will be approximately the same when using R-407C.
An R-22 Refrigerant Replacement for Direct Expansion Refrigeration. Freon™ MO29 (R-422D) refrigerant is a low-toxicity, non-ozone depleting hydrofluorocarbon (HFC) replacement for R-22.
R-407C has thermodynamic properties that make it a "look alike" replacement for R-22, with compressor capacities and system pressures and temperatures that are similar.
R-407A is a close match to R-22's capacities and flow rates, making it well suited as a retrofit for R-22 in supermarket and food storage applications. Additionally, R-407A is one of the more energy efficient R-22 retrofit options available for refrigeration applications.
Heating mode The compressor pressure ratio of R-407C was 0.7% to 9.3% higher than R-22 for the two heating mode test conditions.