Mix three or four drops of dish detergent in half-filled bucket of water. (Or you can go “old school” and do the cleaning with vinegar: Use two or three tablespoons of distilled white vinegar to a gallon of water. Using vinegar to clean a painted room can be surprisingly effective.)
Mix water and dish soap
Now that the dust is wiped away, it's time to wash walls. Fill one bucket with a gallon of warm water and mix clear liquid hand or dish soap and water in the other. Soak a cloth in the solution, and wring it out well.
First, gently dab a stain with a damp rag or non-abrasive sponge, as it may come off without the need of soap or a cleaner. If that doesn't work, dip a damp cloth in dry baking soda or a solution of baking soda and water, then gently scrub the mark. Use a stronger chemical cleaner if needed, but only after testing.
Vinegar is a great all-purpose cleaner and can also be used to effectively clean walls. You can create a simple cleaning solution with vinegar and water. Even though it's a natural solution, be sure to perform a spot-test before proceeding.
Use a small amount of dye-free hand soap or dishwashing detergent dissolved in warm water. Glossy and semi-glossy finishes are a bit hardier, and you can use cleaners with a degreasing agent, including stronger types of dish soap.
Regular Cleaning
If you need even more firepower, create a solution containing 1 cup ammonia, 1/2 cup vinegar, 1/4 cup baking soda and one gallon of warm water. Add the solution to a spray bottle, spray the solution onto the wall, and lightly scrub with your sponge.
Vinegar will not be harmful to the paint on the walls, so do not worry when applying how to clean the stain on the wall with vinegar. Fill a bucket with clean water and add the vinegar, making sure to replace the water when it becomes dirty.
Mix three or four drops of dish detergent in half-filled bucket of water. (Or you can go “old school” and do the cleaning with vinegar: Use two or three tablespoons of distilled white vinegar to a gallon of water. Using vinegar to clean a painted room can be surprisingly effective.)
Work top to bottom, left to right, and gently spray (more mist than stream) the wall down with your wall cleaner of choice. Apply some pressure and literally mop the wall.
Latex-based paint responds very well to vinegar or dish detergent. Add just a few drops of dish detergent or a few tablespoons of vinegar to approximately half a bucket of water. Once these solutions have been mixed together, use a soft sponge to gently remove dirt and grime from your walls.
Because it's such a mild cleaner, dish soap is an ideal first line of attack for dirty walls. A mixture of 1 ounce of your favorite dish detergent per gallon of warm water removes general dirt from most surfaces as well as smudges from walls with a gloss or semi-gloss finish.
Steps For An Expert Clean
Add about ¼ cup of your favorite Pine-Sol® scent to a gallon of water. Dip a sponge, rag or cloth in the mixture and wring out until it's lightly damp. Then, start wiping down the walls from top to bottom, using Pine-Sol® at its full strength on stubborn marks. Wipe down the walls with water.
All-Purpose Cleaner
Mix 1/3 cup of bleach, one gallon of water and one teaspoon of Tide powdered laundry detergent. It works amazingly well on walls, bathroom surfaces and pretty much everywhere else!
Sugar soap will help cut through stubborn stains – on your walls, benches or floors – but you will need to change up your tools of the trade. Switch out the soft sponge for a non-scratch scourer and pour the non-diluted sugar soap concentrate straight onto it.
Baking soda can be another solution! Use a combination of water and bicarbonate of soda /baking soda on a soft cloth or towel to clean your walls. Use a half a cup of baking soda in a bucket of warm water and clean the same way. Any marks on your wall will come with this perfect blend.
The best solution for cleaning walls is plain warm water. To clean grease off kitchen walls, add a few drops of dish soap to cut through any accumulation. Simply dampen a sponge with your chosen cleaner and start scrubbing.
Use the Magic Eraser to remove scuffs, dust and grime from the surface of your walls. In just a few firm swipes, you should be able to see the Magic Eraser work its magic. When you're done, your walls will be clean, prepped, and ready for your new paint.
To start washing the walls with Swiffer Wet, dust the walls using a light brush. Once dusted, take the Swiffer Wet and begin wiping the surface of the wall. It's best to do this slowly and methodically for better results. Using Swiffer Wet to wash your walls is the way to go.
Wipe down walls with a dry duster. Dilute a multi-surface cleaner like Pine-Sol in a gallon of water. Consult the product instructions for the best cleaner-to-water ratio. Use a sponge that's dampened (not soaking) with the solution to wipe down walls, using a dry cloth to wipe down clean areas as you go.
Usually no rinsing required. On wood surfaces, do not allow puddles of cleaner to remain. *Not recommended for use on unfinished, unsealed, unpainted, waxed, oiled or worn flooring.
No matter what type of paint you have on your wall, fill the bucket about halfway and never use more than a couple drops of dish detergent. Some alternatives: castile soap instead of dish detergent, a microfiber cloth instead of a sponge, and a long-handled, soft-bristled brush for hard-to-reach places.
Always use soft sponges and cloths to avoid scratching the paintwork. Next, use warm, soapy water (using your mildest cleaning detergent) and a soft sponge to gently clean your walls. Don't oversoak your sponge, as too much liquid could result in water stains being left on your walls.
Heat vinegar in microwave until hot and pour into squirt bottle. Add the Dawn soap. Put the lid on and gently shake to incorporate. You now have a powerful cleaning product that will melt soap scum and tub and shower buildup, clean sinks, appliances and just about anything.