Unfortunately, you can't just paint over damp or mould in the hope it will disappear. Even if you use waterproof paint, it can still seep through over time. Depending on how bad the problem is, you may be able to remove the mould by cleaning the area without repainting.
Painting over mold is not recommended as it doesn't address the underlying issue and the mold will likely continue to grow, potentially causing health issues and structural damage over time. Here's a guide to help you address the mold issue in your bathroom:
To remove mold before painting a wall, start by cleaning the affected area with a solution of water and bleach (1:1 ratio). Scrub the surface thoroughly and allow it to dry completely. Afterward, use a mold-resistant primer to prevent further growth before applying paint.
While painting over mould may temporarily disguise the problem, paint alone will not kill mould. Instead, the mould will continue to grow underneath the paint until it begins to show through. It may also cause the paint to bubble or flake, ruining the finish.
Painting over mould can in fact make the problem worse. Hidden beneath a layer of paint, the mould can spread across a larger area and emerge in other areas that were previously unaffected.
The only effective way to permanently get rid of mould problems is by reducing the build-up of moisture in your home. This can only be achieved through better ventilation.
Discoloration or Stains
When mold has been painted over, it can start to show through the paint. It often looks like stains on the wall that take on a yellow or brown color. You'll likely notice these stains through light-colored paint or on the ceiling.
Although it is designed to be applied directly to mold and mildew prone surfaces, any existing mold and/or mildew on the surface should be removed before priming and painting. This will ensure best results. Wash the area with a mildew remover, rinse with water and allow to dry before priming.
Mix a solution of one part bleach and four parts water. Take a cloth and wipe this solution across the wall, scrubbing gently until all the mould has been removed. You can then wipe the bleach away and dry the area using a separate cloth.
Anti-mould Paint. Anti-mould paint provides a durable and decorative coating to both ceilings and walls, and it also offers long-lasting protection against mildew, mould, and fungal attacks. It also does a great job of insulating walls when applied liberally.
Always remember, mold needs heat/humidity or a water event to thrive. Don't feed it more by putting bleach on it! As a toxic cleaning chemical, bleach can be corrosive on surfaces, and when mixed with other chemicals it has the ability to produce harmful fumes.
Start by washing the surface with a solution of one part liquid bleach and three parts water. Apply the solution and scrub the mildewed area. Allow the solution to remain on the surface for 10 minutes. Rinse thoroughly with water and allow the surface to dry before painting.
Remedy by CitriSafe Hypoallergenic Laundry Detergent fights mold in clothing and bedding! CitriSafe is especially helpful for washing clothes worn during a mold clean-up job, but can be used for all your laundry needs.
Technically, yes, you can paint over mold. But, you shouldn't!
Is it okay to be in house with black mold? Black mold can cause health problems. As such, it is not advisable to be in a house with black mold. If a person must stay in a house with black mold, they should try to seal off any areas where black mold is present to reduce contact with it.
According to the CDC, people usually experience their first symptoms within 2 to 9 hours of their first exposure. On the other hand, some people could go for weeks or months before feeling sick if their exposure is limited enough. This is why it is also important to check damp, dark areas of your home for mold.
It irritates the nose and throat, which can lead to both sneezing and coughing as your body tries to get rid of the irritant. Inhaling mold spores can also trigger coughing in people with allergies or an asthma attack, for those with asthma.
The paint will simply cover the visual presence of the mold, such as the spores and dark spots that it leaves as it grows. The mold will never be eliminated when you throw a coat of paint over it. Instead, it will keep growing and eventually reappear through the paint.
All affected areas should be cleaned first with an all-purpose cleaner and a bristle brush. You can then spray the area with a liquid biocide, or white vinegar. This is a chemical solution that kills the mold spores. A bleach solution is not recommended for cleaning, as it does not effectively kill all the mold.
Zinsser Mold Killing Primer is a water-based EPA registered fungicidal protective coating that can be used to paint over and kill all existing mold, mildew, moss, fungi, odor causing bacteria and any other fungal organisms. It prevents the growth of mold, mildew and other fungal organisms on the paint film.
Musty Smell
If you think there's mold in your walls, get on your hands and knees and smell the electrical outlets. This might sound silly, but it may help you sense mold if it's growing within walls. Outlets have better access to the area behind the walls. Thus, smelling them can help identify the mold problem.
Unfortunately, you can't just paint over damp or mould in the hope it will disappear. Even if you use waterproof paint, it can still seep through over time. Depending on how bad the problem is, you may be able to remove the mould by cleaning the area without repainting.