We use our
The method we use for carpet cleaning is hot water extraction, commonly referred to as steam cleaning. Stanley Steemer's exclusive hot water extraction method removes the toughest, deepest dirt safely and gently. Hot, soft water and a specially formulated cleaning solution are injected deep within the carpet fibers.
Steam cleaning is a method that can be used periodically but should not be used regularly, as it can wear on the carpets unnecessarily. Finally, steam cleaners can often leave moisture in the carpet, which can take upwards of 24 hours to dry.
Pros rely on peroxide (Oxy) solutions for targeted stain fighting. This professional grade Oxy formulation powers away stains from red wine, blood, food and drink stains, urine stains, grease, and dirt and more ! Pros rely on fast-acting spot removers to make quick work out of stains.
Hot Water Extraction
Otherwise known as steam cleaning, this is easily the most common professional carpet cleaning technique. Steam cleaning uses hot water at high pressure to penetrate into carpet fibers, breaking down the dirt and bacteria stored deep within. The hot water is then extracted via vacuum.
Abrasive cleaners can damage the carpet fibers and leave a bare spot where the stain used to be. The same goes for heavy-duty scrubbing brushes. If you must scrub your carpet, use a mild cleaner and a soft bristle brush to prevent damage.
So, where does the dirt go when you steam clean? Actually, it doesn't go anywhere. Instead, the heat and vapour of steam cleaning ensure that all the unwanted substances or stains are fully broken down and easy to get rid of.
Although we offer both approaches, in our opinion, steam cleaning tends to be the better option in most situations. Here's why: It can usually remove ingrained dirt more effectively – particularly stubborn stains that have embedded themselves deep into the fibres.
At Stanley Steemer, we use a process called hot water extraction to clean your home. This is often referred to as steam cleaning because of the steam you see as we clean, but we don't actually use steam to clean.
One factor that greatly impacts the cost of a professional cleaning is the specialized equipment and products being used during the process. These tools are more advanced than your average household vacuum or floor mop—here are some ways they differ: Degree of Cleaning: Professional cleaning processes may vary (ie.
While steam cleaning uses hotter water that transitions into steam, this can actually set some stains deeper into the carpet instead of removing them. On the other hand, hot water extraction utilizes less intense heat that, combined with a cleaning solution, flushes the carpet fibers more thoroughly.
Stanley Steemer typically charges around $50-$75 per room for areas exceeding 400 square feet. The cost may increase depending on the level of dirt or stains present. It's important to note that these prices are estimates and can vary depending on your location and specific requirements.
Stanley Steemer Odor Out Plus uses natural bacterial enzyme action to digest organic odor sources. This eliminates the odor at the source rather than covering it up with fragrances.
Stanley Steemer is your hardwood flooring cleaner, we service solid wood, engineered wood, laminate, vinyl & luxury vinyl flooring, and linoleum.
Long drying times for carpet
In Steam Cleaning Equipment, using steam for carpets, you may have to wait up to 24 hours for the carpet to be completely dry and able to be walked on again. This could be inconvenient for some, especially if the carpet is in a workplace or commercial area.
Step 5: Rinse Your Carpets (Optional)
An optional step that we recommend if you have time is to go back over the cleaned carpet again with only hot tap water in the tank (no formula this time). This will remove any leftover formula and give your carpets an extra clean.
The Best Carpet Cleaning Process found by Nationwide Consumer Testing is the Circular Dry-Foam Carpet Cleaning Method. The Circular Dry-Foam Carpet Cleaning Method had a very high level of soil removal (92.3%) with little or no soap residue. It doesn't use harsh detergents which are oily or sticky.
Steam cleaning is a low-moisture method of cleaning that is 100% chemical-free. You can clean and sanitize virtually any surface in your home, using only tap water.
They not only force pathogens like E. Coli and Salmonella to the surface of the item being cleaned, but they actually kill them without the use of harmful chemicals. Keep in mind that regular steam cleaners deodorize and sanitize, but vapor steam cleaners are the most powerful.
After steam cleaning, the surface can be rubbed dry using a cloth. Note for silicone grouting: apply steam only briefly to avoid damaging the material.
For synthetic carpets: Mix ¼ teaspoon of a translucent liquid dishwashing detergent, such as Dawn or Joy, into one cup of lukewarm water. For natural fiber carpets: Mix one teaspoon of translucent liquid dishwashing detergent, such as Dawn or Joy, into 1 cup of lukewarm water.
You should go for earth-toned coloured carpets such as browns, greens, blues, greys, and oranges. These help hide dirty marks and can help lengthen the time needed in between vacuuming and cleaning. Try to choose darker tones in the colour wheel, rather than lighter ones.
One of the most common causes of carpet damage is simple wear and tear. Over time, constant foot traffic, furniture movement, and general use can lead to gradual deterioration of the carpet fibers. This type of damage may manifest as flattened or crushed fibers, discoloration, or uneven wear patterns.