You may find the battery indicator light rapidly blinking red. This means the battery is out of power, you should charge the appliance ASAP. What is the suction power rated at? The main motor power is rated at 350W.
What does it mean when the Tineco vacuum red light is on? It means it's super dirty. The red light turns on when on a dirty spot.
Two solid blue lights: Medium power. One solid blue light: Low power. One blinking red light: Out of power, or the appliance is blocked,or the battery is overheated. One blinking pink light: The filters or the suction mouth is blocked.
A flashing red light suggests a relatively minor problem like an overfull dustbin or clogged filters, blocked sensors, or low battery levels.
Why is my Tineco water light blinking? The water light is blinking because the code error is indicating that the water tank is full, even though it is clean.
Tineco Support: Frequently Asked Questions (FAQs) | Tineco US. Is it OK to leave the unit plugged into charger after it is fully charged? The PURE ONE S11 has the battery protection function which allows it to stop charging once it reaches full capacity.
Low suction or poor pick-up may be due to a clog in the vacuum cleaner. If you notice a change in the sound of the motor or a reduction in the spinning action, check for clogs. First, remove the Easy Empty dirt tank from the vacuum and discard all dirt and debris.
All electromagnetic waves travels at the same speed in vacuum i.e 3×108 m/s.
Low Battery
Issues with the battery can cause unexpected shut-offs. It includes a battery that drains too quickly, fails to hold a charge, or exhibits charging problems, such as insufficient charging or failure to charge at all.
You may find the brush roller blockage indicator light blinking and a voice prompt reminding you to take out the roller to clean it. Please check the air channel if there are any blockages while the roller is out of the brush roll holder.
How long does the battery last for? iFloor 3 can work 25 minutes and Floor One 3S can work 35 minutes under normal mode or auto mode, it may varies depending on using environment.
Note: If you see a red light on the front LED of your air purifier, this LED is indicating that the air quality in the room is poor. If it is always on red, please make sure to clean the sensors inlets at the back of your air purifier.
If the light is quickly blinking red, the battery has low power. If the light is solid red, there is no power left in the battery. When your unit is running and you see a solid red light, followed by the unit shutting down, it means the brush has stalled. Watch our brush maintenance video for more information.
How do you restart Tineco's cleaning cycle? First, empty the basket and water tank. Make sure the tank is filled with 40% water. Press the self-cleaning button to restart the cleaning cycle.
Double-blinking red light: There is an issue with Joule. Check the Joule app for more information. Also, please check to make sure there is enough water and that Joule is standing upright. Joule may also have overheated, so make sure it is properly ventilated.
The brush may be jammed please check for obstructions
Should the floor nozzle indicator light turn red it is a warning that the brush has become jammed and not turning. Switch the appliance off and disconnect the floor nozzle. Remove the brush by unclipping the release catch on the side and lifting the brush roll out.
If you see too much air in the package, or the package is obviously damaged, it indicates that the vacuum seal has been broken and air can enter, which may cause food spoilage. If the vacuum-packed meat emits an unpleasant rotten smell, it means the meat has gone bad and it is best not to eat it in this case.
If there is no or low suction, then the clog is in the hose. You can remove the clog by running a long, stiff object through the hose, such as a butter knife, starting at the wall end. Another option would be to reverse the airflow through the hose by connecting the handle end into the intake on the main unit.
Vacuum cleaners can stop working for a variety of reasons including power issues, overheating, a full dustbin, faulty switch and more.
We suggest clean filters after each use. To maintain high performance, wash and dry the pre-filter monthly, as well as replacing it every 6 months. Wash and dry the HEPA filter every 3 months, and replace it every 12 months.
That is a great question, thank you for asking! It is not recommended to use any other third-party solutions in the iFLOOR3. The floor washer is designed to be used with Tineco cleaning solutions to optimize the amount of bubbles that are produced with cleaning solutions.
Dear customer, you can just use water to clean your house with S5 Extreme. You can also use our Tineco official cleaning solution if you need a deep cleaning.