By pressing “Hold”, your thermostat will lock in the temperature it's currently at until you change it again. When you are ready for your normal schedule to resume, simply press the “Run” button and return to your typical programming.
A Hold message on a Honeywell Thermostat tells the thermostat to maintain the HVAC system for the building at a set temperature. The temperature will be maintained until the Hold expires or the temperature is manually changed. A Hold can be temporary or permanent depending on its setting.
Both features can allow you to save money on your energy bill. For example, the “hold” button can help you set the temperature to an energy-efficient level if you're out of the house for a few hours. On the other hand, the “run” button allows you to ensure that your scheduled temperatures remain energy-efficient.
The temporary hold setting is when you change the temperature setting to a different temperature and it stays at that setting until the next schedule change. The permanent hold setting holds the temperature setting you have chosen for an indefinite time. This overrides your scheduled settings.
The “Run” setting will undo the hold on the programmable thermostat and return the HVAC to its pre-programmed temperature settings.
Once you have located the reset button, the process to reset thermostat settings is straightforward: Press and Hold: Using a small object, press and hold the reset button. The time you need to hold it can vary, but generally, 5-10 seconds should suffice.
The main function of a holdback thermostat in a mechanical system is to reduce energy consumption. It functions as a control mechanism and aids in maintaining energy efficiency by preventing the system from over-exertion.
Understanding the “Hold” Button on a Thermostat
Although there might be slight differences depending on the manufacturer, in general the “hold” button is used to lock in a specific temperature, regardless of whatever program you might have set for your system.
This is a short cycle protection. Something has happened, usually a power outage and this is a protection for your unit to not turn on and short cycle before all the pressures have been equalized. Wait 3-5 minutes for your air conditioner to be ready to turn on again.
You'll want to have your thermostat set to heat mode in the wintertime and air conditioner auto mode in the summertime. In order for your system to run on auto mode, you'll need to have either the heat mode or cool mode on. This way, your thermostat knows whether to turn on the furnace or the air conditioner modes.
Check the configuration of the thermostat to make sure it is controlling the equipment properly. Verify that the thermostat is wired correctly. Make sure all of the wires are secure and in the correct terminals. Make sure the voltages are between 18 and 30 VAC or 20 and 30 VAC depending on the thermostat model.
Yes, using the thermostat hold feature can lead to energy savings, which in turn can reduce your energy bills.
By pressing “Hold”, your thermostat will lock in the temperature it's currently at until you change it again. When you are ready for your normal schedule to resume, simply press the “Run” button and return to your typical programming. Convenient, right? Programmable thermostats are a great technological innovation.
For the Honeywell Home app: Select the thermostat, press the Schedule icon, choose Options, then Turn Schedule Off. For the 8000 series thermostat: Press the "Sched" button, select "Edit," choose the days and period to clear, then select Cancel Period to clear the schedule.
Press + or - to change desired temperature. On the left hand side of the screen you will see 'Temporary Hold' or 'Permanent Hold' displayed. Below that you will see 'Hold' displayed.
If you have a manual thermostat, setting the temperature on your Honeywell thermostat is simple. All you need to do is to press the up and down buttons to set the temperature. The temperature you set will stay until you change the temperature again.
Turn your thermostat “off”, then flip the related circuit breaker “off”. Wait 30 seconds, then turn the breaker back “on,” then the thermostat. Set the thermostat to hot or cold, whichever you prefer, and your desired temperature. This should effectively reset it.
Remove the temporary hold: Once you have found the current temperature setting, you should see an indicator that shows a temporary hold or override. This indicator may be a flame symbol or a clock symbol with a plus or minus sign. Press the appropriate button or use the arrows to remove the temporary hold.
When your thermostat says “hold,” it simply means that the hold function is active and the current system temperature will be maintained until you change it or the hold expires.
A permanent Hold will keep the temperature held at the set level until it is manually overridden by changing the temperature. It will never expire on its own. On the the other hand, a temporary Hold will keep the temperature held at the set level for a predetermined time period.
Set cannot be changed until the setting of the temperature is turned up or down. Hold is when's temperature is set until the next segment is arrived at. Example: my thermostat is set to go on at 6:am to 70 degrees. If I were to wake up at 4am and feel cold I can set the temperature to 75 degrees.
Like any other electronic device, sometimes a digital thermostat needs a reset to get it working properly again. Resets are most often needed after a power outage, as the sudden shutoff can prevent a digital thermostat from sending signals to your HVAC system properly when the power comes back on.
The "Wait" message on a Honeywell Thermostat means the thermostat is waiting to activate the HVAC system.