If unsure of cleanliness, always wash surface with household ammonia and water solution, appropriate cleaning solution or solvent (do not use TSP as a cleaner).
Denatured alcohol. I tried this before and it's better to use denatured alcohol.
Wash out the bin with a mixture of salt, vinegar and warm water. Mixtures like this one disinfect the surface of the plastic and neutralise unpleasant odours. Alternatively, you can use special plastic cleaner detergent, which you spray specifically on the bin and then rinse off with clean water.
BIN should not be thinned with mineral spirits. It's a shellac based product and the thinner is alcohol. In fact, small amounts of mineral spirits can be used as a retarder to slow up the drying of shellac. Larger amounts will damage the BIN and it may never dry properly and probably will lead to adherence problems.
If spills or drips have dried, use denatured alcohol or ammoniated detergent to soften and remove primer. Wash application tools in a solution of 1 part ammonia and 3 parts water immediately after use. If product has dried on application tools, soak tools overnight in a solution of equal parts ammonia and water.
Cleaning a Shellac Finish
If your shellac finish is in good condition and just needs cleaning, use a mild, biodegradable liquid dishwashing soap diluted in warm water.
Shake brush cleaner thoroughly. Decant into a suitable container, then soak brushes in the liquid for a maximum of 4 hours, agitating periodically to loosen, and removing any excess dried-on paint before reimmersing into the brush cleaner until your bruses are clean.
Clean Wood Surfaces
The solvent efficiently removes dust, dirt, grease, paint, and scuff marks while adding luster to the surface. It proves particularly beneficial for restoring furniture and well-used wooden items. Always ensure to remove solvent residue after cleaning by wiping the surface with a clean cloth.
If thinning is required, add no more than 10 ounces of water per gallon. In most cases only one coat is necessary to prime most surfaces. If excessive absorption occurs over very porous substrates a second coat may be necessary.
It is recommended to clean your wheelie bin at least once a month. However, if you notice any foul smells or visible dirt, it's best to clean it more frequently.
Citrus Peels: Place citrus peels, such as lemon or orange peels, at the bottom of your bin before adding a new trash bag. The natural oils in citrus peels help to neutralise odours. Baking Soda: Get your paste making skills on. Mix baking soda with a small amount of water, to create a paste.
Baking soda is not only suitable for baking. The little white powder can do so much more – such as absorbing odours. All you have to do is: sprinkle some baking soda on the bottom of your bin and place a new trash bag into it – that's it!
Dispose of waste and residues in accordance with local authority requirements. Make sure containers are empty before discarding (explosion risk). Absorb in vermiculite or dry sand and dispose of at a licenced hazardous waste collection point.
DENATURED ALCOHOL, Mohawk Shellac Reducer (formerly Behlen Behkol), is formulated specifically to dissolve shellac flakes and dilute or 'cut' liquid Shellacs. a little more open or 'working time', a good solvent choice for mixing your own shellac. Also used to dissolve alcohol Aniline Dyes.
The beauty of many Zinsser primers, especially the Bulls Eye 1-2-3, is their excellent adhesion, eliminating the need for sanding even on glossy surfaces. However, good surface preparation can always enhance the final result.
Since mineral spirits are highly flammable, be sure to put all of your dirty paper towels in a fire safe can and dispose of them properly.
Many counties have banned mineral spirits due to their toxic nature. Unfortunately, this means that do-it-yourselfers have to find alternatives for the same. Here are a few substitutes that work the same way. Acetone – It is a solvent and hence can be used for cleaning or degreasing.
Remove Zinsser® B-I-N® and most types of dried-on paint from brushes with ease using B-I-N® Brush.. MORE. Remove Zinsser® B-I-N® and most types of dried-on paint from brushes with ease using B-I-N® Brush Cleaner and Restorer. This product contains powerful detergents that break down paint for an ultra clean finish.
Polycell Brush Cleaner is the easiest way to get brushes and rollers really clean with no mess or paint residue. It contains powerful detergents to break down the paint so it cleans better than white spirit. Ideal for most types of wet paint, including gloss.
Natural bristle is the best choice for oil-based paints, varnishes, shellac, alkyd enamels, oil stains and oil-based polyurethanes. The highest quality bristles come from mainland China. Experienced, traditional painters will say there's nothing like the finish that a China bristle can provide for oil-based coatings.
Wash the area with a soft-bristled brush, using a solution of Washing (sal) Soda or detergent (not soap) and water. Rinse with clear water and allow to dry. If varnish or shellac has dried and the acetone does not remove it, try a paint remover, testing first in an inconspicuous spot.
Solvents for Shellac
To dissolve shellac, I like to use anhydrous (or water-free) isopropyl alcohol as the solvent. It might take a bit longer to dissolve the shellac, but the advantages outweigh this slight inconvenience.
Mix four parts of denatured alcohol with one part of shellac in a clean jar and mix completely. Brush this concoction onto the finish, working only one area at a time. This should dissolve the old finish somewhat and cause it to be revived. Wait at least a few hours to see how well things are coming along.