Favorites include pine oil mixed with water for disinfecting properties or a simple mixture of water and vinegar and lemon for that clean smell. There are many different types of mops that pros use, such as the sponge mop or a traditional cotton string style mop.
A professional floor scrubber is a machine used to clean and maintain hard surface floors. It's no simple mop. It uses a combination of water, a cleaning solution, and a rotating brush to scrub the floor surface and remove dirt and debris.
Specific to hard floor care, janitorial power equipment such as floor scrubbers, buffers, and burnishers, can accelerate the required cleaning time and help to reduce costs. Daily and periodic cleaning will maintain the appearance of your floors and reduce the need for restorative maintenance.
The first time, wet the entire floor (don't flood it, just get it good and wet). This will loosen the dirt and any sticky goo. Mop around the edges first, then move to the middle of the floor, using overlapping, figure-eight strokes. When one side of the mop gets dirty, turn the mop over to the clean side.
The only vinegar that works for cleaning floors is distilled white vinegar. The simple kind. It has an acidity of 5 percent which is perfect for cutting through grease, grime, and dirt. It is also cheap enough that you can use tonnes of it in cleaning all your surfaces, and still not break the bank or your budget.
Using excess water
A common mistake is thinking that wet is clean! On the contrary, when cleaning a floor, you should try to use the least amount of water possible! After dipping the mop in the bucket, wring it out until it's almost dry!
It's best to sweep, vacuum, and mop your floors to remove any dirt and dust that has collected on nearly all floors types, says Leanne Stapf, COO of The Cleaning Authority. "It is best to clean your floors every one to two weeks.
String mops are good for larger cleaning jobs, since their buckets provide a large supply of cleaner, meaning you can clean large areas (there's a reason you'll see these used by professional cleaners).
Vinegar has a pH level about 2.5, making it ideal for cleaning dirty surfaces. A small amount of dish soap or Sal Suds may also be combined with vinegar to help lift dirt and grime on floor surfaces. (Never combine castile soap with vinegar.) White distilled vinegar is best to use when making a floor cleaner.
For us this means the living room, dining room, and kitchen. I also use Fabuloso® to mop the floors with too, it works great and leaves them smelling wonderful and clean too.
Too much cleaning product used
Most people think that using too much floor cleaning solution will lead to squeaky-clean floors. This is usually not true and can easily lead to a sticky residue after cleaning. This will often leave floors sticky.
Any high-traffic areas in your home should be wet mopped once a week. Rooms in your home that are not frequently used—such as a guest room—do not need to be mopped weekly. Mopping every other week or monthly should be sufficient.
But as a rule of thumb, you should mop your floors at least once a week—especially in areas that are more likely to get stains from drips and spills, like the kitchen and bathroom. “Of course, you need to vacuum or sweep the floor before mopping,” explains Leiva.
It's essential that only 'neutral' cleaners and not acid-based cleaners are used on your flooring. Avoid using the following chemicals and cleaning agents when cleaning your concrete flooring: Vinegar/lemon-based products – their acidity can cause damage to the concrete.
One of the best reasons to use a floor scrubber, is that floors are drier. Using a mop allows floors to stay wet for a time, causing a safety danger. Slip-and-fall lawsuits cost companies millions of dollars each year. Floor scrubbers completely suck up all the dirty water and helps prevent this.
Dry Your Floors
If they dry poorly, you will have streaks and other marks littering your newly mopped floors making them look dirtier than ever. If you plan on letting your floors air dry, you mustn't walk on them until it is completely dry.
You can also use the vinegar and water solution in a spray mop. Air dry. There's no need to rinse your vinegar-mopping solution from your floors.
There are a few reasons why it happens: Using Too Much Soap: When it comes to cleaning, using more soap does not mean getting the floor extra clean or cleaning it faster. Using more soap leads to a residue build-up that can actually attract more dirt to the floors instead of getting rid of it.
Floor Mopping
Mild dish soap is a surprisingly good floor cleaner. All you need is 1 to 2 tablespoons of dish soap mixed in with a bucket of water. Floors will be clean and shiny in no time. Dish soap is very effective on resilient floorings, such as linoleum and vinyl, and also works well on ceramic tile.
To use this method, pour one cup of white vinegar into one gallon of water. Then, mop the floors with the solution—don't forget to rinse with clean water before calling it a day. Vinegar's acidity should eliminate the sticky layer without damaging the floors.
Reasons your hardwood floors are always dirty include cleaning product build-up, heavy foot traffic, pets, or poor air filtration. Sunlight, tracking in ice and salt, and dust can also leave floors dirty and dull. Dragging furniture, wearing shoes indoors and not cleaning them often are also causes.