Sweep off or vacuum up any loose dirt, dust, and debris from the concrete surface. Using a garden hose, wet the concrete. Then, apply a mixture of trisodium phosphate and water, scrubbing the solution onto the surface using a stiff-bristled broom. You can also use a pressure washer for this step.
Sodium Hypochlorite 12.5% (Bleach, Chlorine)
Sodium Hypochlorite, commonly known as bleach, is the most common and extensively used chemical used by commercial pressure washers. Our bleach is sold at 12.5%, which is stronger than other leading brands of bleach.
Use a detergent such as Dawn or Ajax dishwashing liquid mixed with water to brighten a concrete patio that hasn't been cleaned in a while. Use a detergent such as Dawn or Ajax dishwashing liquid mixed with water to brighten a concrete patio that hasn't been cleaned in a while.
A power washer is the easiest way to clean concrete outdoors. You should be able to blast away dirt, mildew and grime in an afternoon. Rent one and read the instructions on how to use the machine before you start the project. Spray the patio surface with a detergent and use a stiff brush to scrub it into the concrete.
But that's not all; chlorine bleach can also be used for cleaning the concrete driveway. Of course, you should dilute it with equal parts of water or a 1:1 ratio. With the mixture ready, spray it on the driveway, allowing it to sit for 10 minutes. Then, use a stiff brush before rinsing with clean water.
Simple Green Oxy Solve Concrete and Driveway Cleaner can be used with a power washer or for manual cleaning of concrete surfaces including driveways, sidewalks, patios, and walkways.
Get Oxygen Bleach
Another relatively safe and environmentally friendly solution for cleaning concrete is an oxygen bleach product, such as OxiClean. Just be sure to wear rubber gloves, as bleach products can be tough on skin. Sprinkle the powerful solution over the entire patio and scrub it with an ordinary push broom.
If your area is more prone to algae and mold, then you may want to wash your concrete more often. You should pressure wash your concrete at least once a year to protect your concrete and the value of your home. Using a concrete sealer can also prevent damage to your concrete after it has been washed.
A hose or pressure washer can help remove mold, mildew or water stains from concrete patios and driveways. If staining persists, use a mold remover or bleach solution to treat the area. Then scrub the stain with a brush and rinse thoroughly with clean water.
Muriatic acid can work wonders on filthy concrete. However, it shouldn't be used on penetrating sealers since it can damage these finishes. It might also damage some acrylic sealers, so test a small area if you're not sure.
The Liquid peroxide cleans, refreshes, and brightens concrete, tile, and grout without leaving watermarks or residue in contrast to other cleaning chemicals. Powdered peroxide-based formulas are generally high-performance alkaline, tile and grout cleaners and degreasers that are made for use on heavy-duty concrete.
OxiClean can be used on many surfaces, indoors and out. For removing tannin stains from concrete, first sweep the surface and hose it off. Getting the concrete uniformly damp before you add a cleaner is always a good idea, because doing so will yield more even results.
Yes, vinegar is an excellent concrete cleaner. This solution can strip surface-level messes from concrete. Due to its acidic properties, vinegar can be a powerful tool for breaking down offensive materials such as dirt, stains, and bacteria.
Pressure washing is one of the fastest, most effective ways to get your concrete white again. Concrete can change color over time due to pollen, algae, or dirt buildup, but a good pressure wash can easily remove dirt and stains and make your concrete look new again.
A wet look sealer, as the name implies, is a concrete and masonry coating designed to make surfaces appear as though they are wet. Treated surfaces will have a slightly darker look, some color enhancement, and a glossy finish.
When cleaning with basic pH chemicals such as sodium hypochlorite, you remove dirt, mold, and algae from surfaces easily, but do not get the brightening effects acidic pH chemicals, such as muriatic acid, provide. Muriatic acid can provide that bright white look that new concrete often has. Removes mineral stains.
The main difference is that power washing uses highly pressurized steam to do the cleaning while pressure washing just uses unheated tap water, without the help of a heating element.