Vegetable or canola oil can work wonders, as can peanut butter or mayonnaise. Spread it on, let it soak into the residue for about an hour, then wipe it away. For a tougher clean, try rubbing alcohol or vodka. Let it fully permeate the unwanted residue, then rub away completely with a cloth.
Rubbing alcohol is an effective solvent that's safe for most plastic, wood, and glass surfaces. Vodka is a good substitute.
What removes sticky residue? Rubbing alcohol or white vinegar. Dab a paper towel with either ingredient, then spread the towel over the affected area for 5 minutes. Doing so should soften the sticky residue and you should be able to scrape it off easily.
Use soapy water, vinegar, cooking oil, or even peanut butter to saturate the adhesive, then wipe the spot clean with a cloth or paper towel. Try acetone, rubbing alcohol, or commercial cleaners on extra stubborn residue spots.
While more commonly found in a salad dressing, oil and vinegar are an effective way to clean that sticky residue. Lora Ladd, who runs the account as well as her own cleaning business, explains that the oil loosens hardened grease, while the acidity of white vinegar breaks down food debris.
One easy method is to use standard cooking oil or oil-based materials. Vegetable or canola oil can work wonders, as can peanut butter or mayonnaise. Spread it on, let it soak into the residue for about an hour, then wipe it away. For a tougher clean, try rubbing alcohol or vodka.
Hydrogen peroxide can soften up sticky residue. Soak a cotton ball in the peroxide and apply it liberally to the residue. Let this sit for about 10 minutes before using a putty knife or spatula to remove the adhesive. Work gently and carefully to avoid scratching the glass.
Rubbing alcohol and vodka are popular methods for removing sticker residue because they're safe to use on a variety of surfaces such as wood, plastic and glass. To remove sticker residue with rubbing alcohol, apply it to a cloth until wet and rub the residue away.
If you're struggling to remove a sticky substance that's stuck onto a rubber surface, fret not. Apply some rubbing alcohol to soften the residue and you should be able to clean it off easily. A solution of hot water and dish detergent can also do the trick.
Quick tip: Oil-based ingredients like mayonnaise and even peanut butter can also work in a pinch. Apply mayo or peanut butter to a sticky surface, wait 20 minutes, and then wipe it off with a dry cloth. Repeat the process if necessary.
Warm Soapy Water: Mix warm water with a bit of mild dish soap. Soak a cloth in the solution and gently rub the sticky area. This is gentle enough for most painted surfaces. Vinegar and Water Solution: Mix equal parts white vinegar and water, apply it to a soft cloth, and gently rub the residue.
3M adhesive remover is amazing stuff. It beats Goo Gone by a wide margin, I recently used it to remove PETG residue from my 3D printer bed and that stuff is gnarly. 3M 38983 General Purpose Adhesive Remover - 12 oz. https://www.amazon.com/dp/B004EBNTYK/ref=cm_sw_r_cp_api_i_cU...
One of the easiest ways to get rid of the sticky rubber on your stuff is to use window cleaner or rubbing alcohol. The ammonia in the window cleaner or the alcohol breaks down the rubberized coating, removing the part that's sticky and revealing fresh, unsticky rubber underneath.
White Vinegar
It's even capable of removing sticker residue from surfaces, especially glass and metal. Vinegar's acidity is to thank, as it helps break down the adhesive and lets it be wiped away.
Coconut oil was the clear winner for removing sticky adhesive. As you can see in the photo the coconut oil not only dissolved the adhesive but allowed the leftover label to come off in a chunk instead of having to scrape over and over.
However, the hydrocarbons in WD-40 will break down the polymers in PVC (polyvinyl chloride) plastic as well as polycarbonate and polystyrene plastics. Polystyrene is often used to make automotive dashboards and trim pieces, so it's best to keep WD-40 away from these surfaces as well.
Windex's components, including ammonia, detergents, and solvents, work to break the bonds in glue leftovers, making them easier to remove. It dissolves sticker residue and water-based glues like white craft or school glue.
Douse a cotton pad or cloth in rubbing alcohol or hydrogen peroxide and let it sit on the sticky surface for several minutes. Then, use the same damp cloth to rub the sticker residue away.
One of the best ways to remove sticker residue is with rubbing alcohol, a substance that's safe to use on most surfaces (such as glass, wood, and plastic). Soak a paper towel or rag in rubbing alcohol and lay it over the surface of the sticker residue for several minutes.
Peroxide is a more powerful cleaner than vinegar and can be used to remove more difficult stains. It should be used with caution, however, because it can damage some surfaces.
The two products can be safely combined to form a paste or used separately to whiten laundry, remove odors, disinfect surfaces, and much more. Never mix and store baking soda and hydrogen peroxide in a closed container. Mix them when you are ready to do some cleaning for the best results.