Porcelain tiles tend to be harder, more resilient and more stain-resistant than ceramic tiles. They are one of the easiest types of tile to maintain but their surface can eventually be eroded by the regular use of corrosive chemicals such as ammonia, bleach or acids that can also damage the grout and loosen the tiles.
Though popular for being gentler alternatives to harsh chemical cleaners, baking soda, Borax, and even salt can harm the finish of your porcelain fixtures. As gentle as they are, these compounds are still abrasive and will scratch your finish, especially with regular use.
Resistant to water, ice, and thermal shocks
The very low level of water absorption makes porcelain tiles frost resistant and resistant to lower temperatures without the risk of cracks, fissures, or detachments.
You can safely use vinegar to clean ceramic or porcelain tiles, whether they are glazed or unglazed. For other types, however, like terracotta, marble or grante, we recommend you look for ph neutral cleaner that will not harm the material.
While hydrogen peroxide is not normally used for cleaning surfaces, there is nothing in normal glazed porcelain that it would damage.
For white porcelain only, bleach can be used to remove stains; never use chlorine bleach in colored or vintage porcelain, as it can damage the finish. For both white and colored porcelain, liquid oxygen bleach (such as hydrogen peroxide) is a good alternative.
Use a Vinegar Solution on Any Stains
A solution of vinegar diluted 1-to-1 with water or a diluted commercial ceramic tile cleaner can be used to clean stains.
You'll also want to steer clear of cleaners containing dyes or coloring if you're cleaning unglazed tiles. Steel wool is also a major no-no when cleaning porcelain, as small fragments can become lodged in the tile and cause rust stains over time. Lastly, avoid hard-bristled scrub brushes or anything else abrasive.
Tile cleaner
If you'd like one product that cleans everything in your bathroom, the famous blue bottle of window cleaner might just be it. Windex can also be used to clean tiles and grout, without causing any damage.
There are a number of cleaning solutions that can be used on tile floors, from diluted dish soap to commercial tile and grout cleaners. Perry recommends rubbing alcohol for cleaning dirty grout and tiles.
The standard strength test for porcelain dinnerware should yield an impact strength of about 0.36 foot-pounds of force. The flexural strength for these materials is about 60-70 megapascals (MPa), about 8700-10,200 pounds per square inch (psi), at best, with earlier examples being significantly weaker.
More specifically, porcelain tiles are what is often referred to as “moisture proof.” As you might imagine, this means that they are impervious to moisture, which means that they aren't likely to get easily damaged simply by being in bathrooms or even wet rooms.
Porcelain tile has a 60+ year life expectancy, so you definitely get your money's worth. It's perfect for walls, floors and indoor/outdoor installations. Rated for high-traffic areas, you won't have to worry about your porcelain floor degrading over time.
Lemon and vinegar are acidic products that must never be used to clean porcelain tiles. Neither should alkaline ones be used like bleach or ammonia. Even though Google might tell you that they are suitable as cleaning products, they are not. Always use a cleaning product with a neutral pH.
Is Comet safe to use on Corian, Formica, porcelain, fiberglass and stainless steel. Yes. Comet Cleansers, Comet Soft Cleanser and Comet Bathroom Sprays are all safe to use on these surfaces.
Because it is fabricated in high heat over 2000° F, porcelain can easily hold its own against hot kitchen or bathroom environments. Its surface is resistant to damage after exposure or contact with hot pans and pots and won't burn, smoke, or emit harmful substances.
For most types of tile, including porcelain and ceramic, you only need one key ingredient: A DIY mixture of warm water and dish soap will do the trick. Follow these steps to clean tiles: Spray the water and dish soap solution on the tile surface. Wipe the area with a damp microfiber towel or cloth.
Especially ceramic and porcelain tile and grout! Blue dawn does not discolor grout joints and further is a great degreasing agent from everyday traffic. Use daily to weekly. The more traffic, the more cleaning.
Never use a product containing ammonia or bleach (or any type of acid-based cleanser); these can alter the tile color and/or stain the grout. Never use oil-based detergents or wax cleaners. On unglazed porcelain, never use any cleaners that contain dye or coloring.
Swiffer wet cloths are designed to be used on most floor surfaces, such as: vinyl. porcelain tiles. ceramic tiles.
You can also use Pine-Sol® Original Squirt 'N Mop®. It's safe for wood and hard nonporous surfaces like ceramic and porcelain tiles, and also sealed granite. You can apply this product directly from the bottle over a 3' x 3' area and start mopping.
While vinegar is safe to use on laminate, vinyl, porcelain, and ceramic tile, it is best to use it sparingly since the acid in the vinegar can dissolve the finish on your floor. Therefore, when you are using it on tiled floors, you want to make sure you cut it with water or rinse it completely with water.
Many homeowners ask if Magic Erasers® can be used on porcelain or if they will damage ceramic tile. The good news is that they can be safely used on ceramic tiles and porcelain, so you have nothing to worry about if you plan on using them this way.
Please note: Always use Lysol® products as directed on the label. Give your porcelain the best chance of looking good and lasting its course by using the correct cleaning methods and products with Lysol®.
However, Real Simple provides a very simple and gentle solution that won't damage the surface of your porcelain tiles. Start by scrubbing your grout lines with warm water to remove any surface dirt or grime. Next make a paste by using hydrogen peroxide and baking soda.