In general, you'll have three types to choose from—master, guest and half—but the choices for how you configure and design these are just about infinite.
A three way bathroom creates three separate, easily accessible areas for the shower, the toilet, and the vanity. This means that three people could simultaneously shower, clean their teeth, and use the toilet without having to share the space.
A full bathroom is made up of four parts: a sink, a shower, a bathtub, and a toilet. Anything less than that, and you can't officially consider it a full bath. Therefore, a bathroom with a sink, toilet, and shower is considered a three-quarter bath. A bathroom with just a sink and a toilet is a half-bath.
A full bathroom contains all four fixtures;a shower, a bathtub, a sink, and a toilet. A ¾ bathroom is missing one of the fixtures, either a shower or bathtub. While both bathrooms are similar, a ¾ bathroom is more suited for smaller homes as a shower is more efficient than a bathtub.
These bathroom components—toilet, sink, shower, and bathtub—produce the four main bathroom types: full bathroom, three-quarter bathroom, half bathroom, and quarter bathroom.
A three-quarter bathroom will have three of the four key components. Most commonly, these rooms will include a toilet, sink, and a shower stall without a bathtub (or in some cases, a bathtub without a shower).
A full bathroom is made up of four parts: a sink, a shower, a bathtub, and a toilet.
Plan a clear floor space of at least 30 inches from the front edge of all fixtures (lavatory, toilet, bidet, tub, and shower) to any opposite bath fixture, wall, or obstacle. Code Requirements: A minimum space of 21 inches must be planned in front of the lavatory, toilet, bidet, and tub.
In newer homes, a typical master bathroom occupies an area ranging from 115 to 210 square feet. The master bathroom in older houses was considerably smaller and used to occupy a modest 75 to 100 square feet. A typical master bathroom design has room for the toilet, a bathtub, a shower stall, and a double sink.
An overview of ADA bathroom layout requirements:
For single handicapped restrooms there must be a 60” diameter for a wheel chair in the room. The grab bars are located off the back wall 33”-36” from the floor and are 36” width. Another grab bar 42” length is also used at 33”-36” from the floor off the wall on the side.
These types of bathrooms do exist, and they are referred to as quarter-bathrooms. These quarter-bathrooms are quite rare simply due to the fact that they contain only one of the 4 main elements of a bathroom. The most commonly seen are those that contain a shower and are typically found at beaches or pools.
Named after the children in the famous nursery rhyme, a Jack and Jill bathroom is a full-sized bathroom that is sandwiched between two bedrooms and is accessible by both bedrooms. This type of bathroom has at least two doors, like an ensuite bathroom but for two bedrooms rather than just one.
A jack and jill-style bathroom is a bathroom that connects two or more rooms. They typically come into play as a second full bathroom in a home for multiple people to share.
Rather than acting as a decimal point, the period between the 3 and the 1 separates the number of full baths from the number of half baths, with full baths preceding the period. The home in the example that was listed as having 3.1 baths has 3 full baths and 1 half bath.
As opposed to a traditional full bath, a three-quarter bath is usually characterized by an efficient combination of standing shower, sink and toilet. This simple but useful design is often used for guest bathrooms, and it can add tremendous utility and value to your home.
Zone 3 is anywhere outside zones 0, 1, and 2 (subject to specific limits) and where no water jet is likely to be used. No IP rating is required. However, if there is a likelihood of water jets being used for cleaning purposes in zones 1, 2 and 3, a fitting rated a minimum IP65 must be used.
While having two sinks can be a nice feature, you really have to ask yourself how often there are two people in the same bathroom needing to use a sink at the same time. Some spaces might be better suited for just one sink.
A standard guest bathroom includes a sink and a commode, which request about 20 square feet (sqft) of space. A medium-sized bathroom will need about 30-40 sqft to accommodate a sink, commode, and shower area, while a full-sized bathroom with all these elements and a bathtub requires an area of 50 sqft.
So you want to add more value to your existing home but don't know where to start? In general, a bathroom can increase your home's value anywhere from 10-40% depending on the quality of the bathroom and its updates. That's anywhere from $20,000-50,000 for cost-effective updates.
We have a 15-15 rule in our school, where in the first 15 minutes and the last 15 minutes of class you can't go to the bathroom, and most of our periods are only like 50 minutes. That's like 20 minutes to go to class, and the middle 20 is usually the most productive.
The 20-20 rule states: students are not allowed to go to the restroom during the first or last 20 minutes of every period, unless in an emergency situation.
Clearance: At least 24" of space is needed in front of a shower or tub entry. Leave at least 15" of space between the shower and toilet or other obstacle.
A separate toilet room, sometimes known as a water closet, is an old design element that is popping up again in master bathrooms everywhere. What about a small separate room is appealing to so many?
A half-bath, also known as a powder room or guest bath, has only two of the four main bathroom components—typically a toilet and sink.
An en suite bathroom is a bathroom that is connected to a bedroom and can only be accessed through that bedroom and no other space in the home, therefore making it fully private. The term "en suite" is borrowed from French and means to make a suite, to connect or attach two spaces.