There are four components to a cabinet: the Box, the Shelves, the Drawers, and the Door. The term Box includes everything but the Door on your cabinets. The Box is the sturdy outer part that supports the shelves and/or drawers. It is composed of the top, bottom, back, side/end panels, and a toe kick.
Learn A Bit About The Cabinets You'll Be Putting In Your Home In Montgomery County, Pennsylvania. The parts of a kitchen cabinet include the carcass, hinges, face, box, frame, rail, stile, panel, and toe kick. There are concealed and exposed hinges.
A 5 piece door or drawer front – framed construction – is a very traditional construction for cabinet doors. It is made up of an outer frame consisting of 4 pieces and a center panel that is either raised or flat; thus a 5 piece door.
Face frame:The face frame is the front of the cabinet's structural box. The door attaches to the face frame and rests against it when in the closed position. It consists of two vertical and horizontal sections to create a box appearance. The hinges attach to the face frame of the cabinet box.
The very bottom of the cabinet is recessed to allow room for your feet while you work at the countertop. This is called the toe kick.
Base Molding
This cabinet molding is also known as the bottom molding. Base moldings are great if you want your cabinets to look like a piece of furniture. It's a great way to dress up your cabinetry and give it a fluid and continuous look.
Base molding is the decorative trim that is installed at the base of cabinets. It covers the gap between the bottom of the cabinets and the floor, and can help to give your kitchen a finished look. There are many different styles of base molding, from simple and understated to elaborate and ornate.
It usually consists of a set of cabinets, or cupboards, and one or more drawers, all topped by a wooden surface for conveniently holding food, serving dishes, or lighting devices.
Cabinet end panels are the decorative rectangular boards that are used to cover the exposed sides of a base cabinet or upper wall cabinet. Cabinet end panels are also called cabinet gables so you may hear that term used as well. End panels can be flat or finished.
A cabinet or furniture piece consists of the carcass or case with two sides, bottom and top, a back and a front. The front may contain drawers, doors or shelves or combinations of the three. Cabinet building has several variations which may be used in construction.
Thermofoil cabinets are some of the most affordable cabinets on the market.
Standard cabinet widths vary depending on the cabinet type. Upper kitchen cabinets are 12, 15, 18, 24, 27, 30, 33, and 36 inches. Upper filler cabinets are 3, 6, and 9 inches wide. Standard base cabinet widths are 12, 15, 18, 21, 24, 26.25, 27, 30, 33, 26, 39 and 42-inches.
If you're wondering, “What is a 5 piece drawer front?” the answer is quite simple. A 5 piece drawer front consists of a 4 piece frame around a center panel. The center panel can be raised or recessed, with or without a pattern, while the frame can come in a variety of styles, similar to a picture frame.
A filler is a piece of finished wood used to "fill" openings or gaps between cabinets, or a cabinet and any obstruction, that would inhibit the doors or drawers from fully functioning.
Mullion. "The vertical strip that divides frames, such as with cabinets with more than one door." Mullion Doors. "Also referred to as a divided light door. The solid center panel is omitted and replaced with horizontal and vertical mullions dividing the open panel into smaller panels.
Wall cabinets, also known as upper cabinets, are the cabinets installed on the wall above the base cabinets. Most wall cabinets are around 12” deep, but they can be as shallow as 4” in a smaller bathrooms or as deep as needed for specialty cabinets.
Battens are 3/4" stabilizing pieces of wood, attached to the back of solid wood doors such as the Valencia (81). They are designed to keep the door from warping or twisting. Battens are 1-3/4" wide and are placed 2" from the sides, 3" from the top and bottom of the door.
As the name suggests, end panels are fitted to the exposed end of a unit. The panels are attached to the cabinet and often also support an overhanging work surface, whilst the front edge aligns with doors and drawers to give that fitted kitchen look.
What is kitchen cabinet trim called? Kitchen cabinet trim is often referred to as molding. This term encompasses crown, light rail, base, toe kick, corner, and scribe moldings. Trim can also refer to filler pieces and skin panels.
Another word for a sideboard is a buffet. Not every dining room has one, but if your house has space, a sideboard can be a handy place to display your prettiest serving dishes or set out food at Thanksgiving so your guests can serve themselves.
Meaning of credenza in English
a kind of low, wide cupboard with several parts and sometimes with drawers, usually used for holding glasses, plates, etc.
What Is It? A sideboard or buffet, also known as a buffet table, is a long, low piece of furniture that's usually placed in a dining room to store and display items. It's also used as an extra surface for serving food.
In architecture, a baseboard (also called skirting board, skirting, wainscoting, mopboard, trim, floor molding, or base molding) is usually wooden or vinyl board covering the lowest part of an interior wall. Its purpose is to cover the joint between the wall surface and the floor.
A small yet mighty design element in a room, trim is a type of millwork used on walls for both practical and decorative purposes. “Typically, trim covers the gaps between two areas, but it can also be highly decorative, setting the style and tone of the room,” says Lowe's Project Expert Hunter Macfarlane.
Baseboard: Also called wall base, this moulding is applied around the lower perimeter of the room along a finished floor. Base Cap: A moulding applied atop a piece of base moulding flush with the wall to create a decorative look. It's sometimes used with baseboard.