The durability of stained concrete
This applies to both interior floors as well as outdoor surfaces, so any concrete floor will benefit from a stained concrete finish that beautifies, seals, and protects against cracking, peeling, chipping, and fading.
Stained concrete can be an excellent choice for your residential house. Due to light foot traffic experienced in residential stained floors, a simple cleaning may renew their fresh look for many years.
Spread The Love! Concrete floors that are stained and sealed don't just look beautiful but are also very durable. But this does not mean they are invincible. If you don't take good care of them, they can develop scratch marks, become dull, and wear out over time.
An attractive and expertly finished garage floor can greatly improve the aesthetics of your home's interior and add to the overall appeal. It not only increases the functionality of your property but also maximizes the resale value when you decide to sell your home someday down the road.
To sum it up, most interior projects and all exterior projects choosing between concrete stain or paint are likely better served by a stain solution. Furthermore, horizontal surfaces are best benefited from an acid stain, while vertical surfaces require a professional mineral stain solution.
Sealing your concrete isn't really a labor-intensive, nor costly, job. By sealing your concrete every 2-5 years, as recommended by experts, you should keep your floor in good shape, preventing cracks, pitting, and additional damage.
Although concrete stain is permanent and won't flake off like paint, it penetrates only the top layer of the surface and will eventually wear away as the surface is worn by traffic or weather exposure. You can prevent this wear and prolong the life of your stained concrete by protecting the surface with a clear sealer.
An unsealed, decorative stained concrete surface will show faded colors in a matter of a few months. You could advise your customer that's what happens with an unsealed project and let them make the decision about sealing, but rest assured that an “I told you so,” from you when the fading happens will not comfort them.
The Cons of Staining Wood
While some stains can last up to five years, postponing re-staining a wood surface for too long can cause the job to become more complex and labour intensive. Even decks that are stripped and re-stained will still require maintenance every couple of years.
Depending on the concrete sealer used, it's usually recommended to seal the concrete every couple of years to keep the color from fading. If you choose a high-quality concrete stain and sealer, you may be able to shorten the period between resealing to every 3-5 years.
Because stains penetrate into the concrete surface, their color is durable and long-lasting. When applied to properly prepared concrete, the color will not fade, chip, or peel away.
Acid Staining
Acid stains are a reactive coloring process that penetrates into the porous concrete surface. This is probably the most permanent of all coloring options but is usually limited to eight colors.
Because of this, acid stain is the best concrete stain to use on an outdoor surface. Other styles of concrete stain may fade or discolor as they're exposed to sunlight. Acid stains are so durable that they can be utilized in high-traffic areas without the risk of chipping or peeling.
No, the vibrancy and color tone in acid stains do not fade. However, the physical top layer of concrete which contains the stain can be worn away through use, which can give the appearance of fading. Stone Surface Specialists can apply a special sealer on your newly-stained concrete to prevent this.
In average conditions, your paint or stain will be dry to the touch within 1-2 hours, but you should not walk on it for probably 4-6 hours. In cooler weather or during periods of high humidity, you will need to wait even longer than this.
A basic cleaning routine for concrete should include: Dry mopping to remove debris and dirt and prevent abrasion. Cleaning spills as soon as possible to prevent stains. Damp mopping as necessary with water and a mild detergent.
When properly designed and installed, acid-stained concrete and decorative concrete overlays are almost completely unaffected by water.
Like any hard, smooth surface, stained concrete can become slippery when wet, especially if it has been coated with a high-gloss sealer. For concrete floors or walkways exposed to moisture or in areas with a lot of foot traffic, there are ways you can increase the slip resistance without affecting the color.
After discussing the factors you need to look for and the regional location of the project, in broad terms, Spring is in fact the best time of year to seal concrete. With its moderate temperatures and humidity levels, it tends to provide ideal conditions for the application and curing of sealers.
Leaving concrete unsealed will leave it with a flat look. The color will remain flatter and dull, in addition to the concrete remaining porous and easier to damage. Sealing the concrete will enhance the colors and give it more of a marble or mottled look, smoother and with richer colors.
A solid stain will have a more paint-like finish, whereas the semi-transparent will let the color variation of the concrete still show through. So consider the condition and appearance of your existing concrete floor, as well as the final look that you are hoping for when making your choice.