Keep your thermostat fan on Auto. This is the most energy-efficient option. The fan will only run when your heating or cooling system is actively working, saving electricity, preventing humidity issues, and extending the life of your air filters.
Keeping your thermostat in the AUTO position means less overall energy is being used—and that reduces your utility bills considerably. Not only that, your air filter will last longer than they will if you leave your fan running continuously—in other words, if you leave it in the “on” position.
Helpful Habits. Keeping vents clear also plays a role in your furnace's efficiency. Furniture, rugs, or curtains blocking airflow can cause uneven heating and make your furnace run longer than necessary. Make sure warm air can circulate freely in every room of your home and avoid closing too many vents.
If you want to save energy and money, the answer is usually “auto.” Here's why: When your thermostat is in the “on” setting, the blower will run regardless of whether the temperature set point has been reached.
Our team at Field Plumbing & Heating recommends leaving the thermostat to the Auto fan setting for a few reasons. While leaving the thermostat to the On setting does a better job of circulating the air, it also means you will need to swap out HVAC filters more often.
The ideal thermostat temperature in the winter is 68 degrees Fahrenheit when you're at home. Energy.gov suggests that 68 degrees is a good room temperature while you're awake at home but recommends lowering it while you're asleep or away.
Which Setting Is Best for You? Ultimately, whether to set the fan to “auto” or “on” for heat depends on your individual needs: Choose “Auto” if: You want to save on energy costs, reduce wear and tear on your system, and prioritize efficiency over air circulation.
The cheapest temperature to keep your house in winter is 68°F (20∘C20 raised to the composed with power C𝟐𝟎∘𝐂) while you are home, and lowering it to 61°F–65°F when you are away or sleeping, according to the Department of Energy. Setting your thermostat back 7°–10°F for 8 hours can save up to 10% a year on heating costs.
While it may be tempting to save a few bucks on your heating bill at times, a cold snap is not the time to set back the thermostat if you have pipes that are at risk of freezing. Leave the heat on if you plan to be away during cold weather. Set the thermostat to a temperature no lower than 55° F.
If you'd like to calculate your ideal HVAC fan runtime, here's a simple formula: Measure the square footage of your home. Divide the square footage by 2. This number represents the number of minutes your HVAC fan should run per hour.
Typically, a furnace should cycle 3 to 8 times per hour, running for about 10 to 15 minutes each time. If it's cycling more frequently (short cycling) or running for 20+ minutes straight regularly, something's not right.
It takes time for your home to warm up and cool down. If you're not sure how long it takes, try turning the heating on about 30 minutes before you need it. You should turn it off 30 minutes before you'll stop needing it.
Inadequate or inconsistent insulation, like air leaks, can create hot and cold spots throughout your house. If you've ever seen any of your home's insulation, it's probably what resides in your attic or crawl space.
No, 68°F is not generally considered cold for a house in winter. In fact, experts at the U.S. Department of Energy recommend 68°F as the ideal, energy-efficient temperature for the winter months while you are awake.
Here are a few guidelines to help you decide: Choose Auto if you want to keep utility costs down, minimize filter maintenance, and prefer a quieter system. Choose On if you're concerned about air quality, notice uneven temperatures between rooms, or use a whole-home air purifier.
Using a programmer, you can set 'on' and 'off' time periods for your central heating. Typically, you should set the central heating programme to: Turn on around half an hour before you get up. Turn off around half an hour before you go to bed.
A typical furnace runs for approximately 10 to 15 minutes per cycle, cycling three to eight times per hour. A short cycling system runs for less than five minutes, then quickly restarts, often cycling much more frequently. This pattern prevents efficient heating and creates massive strain on your equipment.
Yes, running your furnace fan continuously in winter is highly beneficial. It balances temperatures across different rooms, continuously filters household dust and allergens, and reduces wear-and-tear on the blower motor by preventing frequent starts. However, it does slightly increase electricity usage and requires more frequent filter changes.
5 Warning Signs It's Time for Furnace Replacement
It's such a simple thing, leaving a single faucet dripping, but it can prevent so many complications later on. How much value does one dripping faucet have? A lot, if it keeps your home's water pipes from bursting during frigid weather.
While we know that water freezes at 32 degrees Fahrenheit, keep in mind that indoor pipes are somewhat protected from the extreme outdoor weather. Without a heat source, pipes may take as little as 3 hours to freeze at 20 degrees Fahrenheit or lower.
It is OK to set your thermostat to 74°F if you're happy with that temperature. However, many people find temperatures between 68°F–72°F more comfortable for everyday living. If efficiency is a concern, you might want to consider lowering the temperature by a few degrees to save energy.
Never set your thermostat below 55°F (𝟏𝟑°𝑪) in winter. Anything lower puts your plumbing at risk of freezing and bursting. For health and daily comfort, the World Health Organization recommends maintaining a minimum indoor temperature of 64°F (𝟏𝟖°𝑪) to 68°F (𝟐𝟎°𝑪).
It's better to leave interior doors open when heating your home. Open doors allow warm air to circulate evenly, preventing hot and cold spots and reducing the strain on your HVAC system. Closed doors can block airflow, making your system work harder and increasing energy costs.
Keep your thermostat set to a minimum of 55°F (13°C) to keep your pipes from freezing. If you are leaving the house for an extended period, maintain this temperature to ensure heat reaches the walls where pipes are located.