you always want to see a blue color flame. A
An orange flame means that the burner isn't getting enough air. You can get a sooty flame, but the more dangerous problem is the incomplete combustion is producing carbon monoxide, which will kill you. Usually its a sign that the burner may be clogged up and air flow is being restricted.
An orange flame is not enough oxygen or air mixing with the gas. There should be an air shutter right where the burner connects to the gas valve, where the gas sprays into the burner is needing either cleaned or adjusted open. You can usually clean this area with a small paint brush or compressed air.
When you use your propane gas cooktop, you should always see a blue flame. That's good, because it's normal. When the ratio of fuel to air is correct, there is enough oxygen for complete combustion of propane. Complete combustion results in a blue flame.
While a yellow or orange gas flame may give you a clue that there is a potential carbon monoxide problem in your home, that's an exception rather than the rule. This is because carbon monoxide (CO) is an invisible gas that you cannot see or smell.
A yellow flame indicates improper adjustment and a possibility of excessive carbon monoxide.
A healthy grill flame may have a little yellow on the tips of the blue flame, but if you're seeing a solid yellow flame, something isn't quite right. Check a few things: Regulator Pressure The most common cause of yellow flames is low gas pressure from the regulator, which is an easy fix that you can do at home.
The answer to the question “what should the flame look like in a gas furnace” is simple. The ideal furnace flame is a roaring blue flame with a light blue triangle in the middle.
APWA Pipe Color Code Chart
Red denotes high and low-voltage electricity. Yellow designates natural gas, steam, propane, and other fuel or heating products such as fuel oil.
If your grill is producing a yellow or orange flame, it is likely for one of two reasons: Low gas pressure from the regulator. Your grill is not generating the correct ratio of gas to oxygen to produce clean combustion.
Though experts and pundits continue to debate the fine points, gas stoves have long been shown to release potentially harmful pollutants like carbon monoxide, formaldehyde, and nitrogen dioxide, a respiratory irritant.
Incomplete Combustion: A yellow or orange flame indicates incomplete combustion, meaning the gas isn't burning as it should. Soot Production: These flames can produce soot, which can accumulate in your appliance and chimney, leading to blockages and potential fire hazards.
A healthy furnace flame is always bright blue. A blue furnace flame means that your furnace is combusting fuel as efficiently as it can and that your exhaust system is working as it should.
You get a blue flame by mixing enough air in with the fuel for the fuel to be burned completely to carbon dioxide and water. You get a yellow flame by adding less air, so the result of the initial burning has carbon and carbon monoxide, maybe even some hydrogen left.
If something contaminates this fuel and oxygen balance, such as calcium, your stove is not operating at optimal capacity. As a result, there are cooler pockets in the flames, resulting in an orange color. (Blue flames are usually the hottest flames that come out of your stove.)
Yellow or orange flames with a gas burner mean that the flame is generating carbon monoxide. Turn the burner off right away, and call for professional assistance.
A proper flame should be a soft blue (Natural Gas) or blue with slightly yellow tips (LP Gas). If the flames are not the right color, too high or too low, the flame may need to be adjusted. Refer to the installation instructions for directions on adjusting the flame height.
The LPG (propane) is a blue flame because complete combustion creates enough energy to excite and ionize the gas molecules in the flame. The exception is a gas fireplace having yellow or red flames, for a more realistic look.
you always want to see a blue color flame. A gas flame appearing yellow or orange in color or behaving with pops of yellow or orange indicates an improper ratio of oxygen for combustion. Often this improper combustion is temporary and could be caused by dust particles or a dirty burner that needs cleaning.
An unstable flickering yellow or orange flame is an indication that the furnace is not producing an appropriate mixture of gas and oxygen. Ignoring this sign can lead to a large gas leak and lead to disaster. If a yellow or orange flame is noticed the furnace should be shut down until a professional can inspect it.
If your flame is yellow or orange, or if you see pops of yellow or orange, that is a sign that you have a combustion problem that should be addressed by a professional. Long streaks of any color, such as yellow, orange, or green means your furnace needs adjustment or cleaning from a professional HVAC technician.