Paver sealant is a great tool to keep paver driveways, patios, walkways, and pool decks, in mint condition, but it's not always necessary. While it's not a must-have, pavers that aren't sealed typically grow weeds in the cracks, lose color over time, and can even have shifting caused by a lack of joint sand.
You're wondering what happens if you don't seal pavers. Your pavers won't disintegrate if you don't seal them, but they'll likely fade much sooner than if you applied sealant. You'll also need to clean them more often, and the stains won't be as easy to remove.
“Do I need to seal my pavers?” The short answer is Yes. Paver sealant is an important maintenance tool to keep paver patios, walkways, driveways and pool decks looking as beautiful as they day they were installed.
From porcelain paving to cheap-as-chips concrete, it's always worth sealing your stone to protect it for the years to come. It will help most garden patio stones look fantastic.
How often do I need to reseal my pavers? If your sealant has been applied correctly by a professional, it should last between two to three years. The care given to the area and other elements like traffic or weather will also play a part in its longevity.
Most contractors and manufacturers recommend sealing pavers for the many benefits. Both concrete and brick pavers are porous materials that can change quality and appearance when they absorb liquids.
How Much Does It Cost to Clean and Reseal Pavers per Square Foot? In total, you should expect to pay around $2 per square foot to clean and seal pavers. The price may vary between $1 and $3 per square foot, depending on the sealant and method of cleaning.
Never Too Late to Seal Pavers
It's always best to seal soon after a new installation. But, our proven system of repairing, cleaning and sealing will also bring back the original luster to old, dirty and fading pavers. Sealing is the final step in a comprehensive process.
Unlike natural stone pavers, porcelain pavers are fade resistant and don't need sealing. Also, they can stand up to almost anything nature can throw at it. Natural stone pavers, of course, are Nature's decorative flooring. Travertine, slate, and quartzite can create eye-popping floors, each different from the next.
Choosing to seal your pavers will keep your color consistent and un-faded. Not only does choosing to seal your pavers keep the color untouched, but it can also increase the vibrancy of your colors. One largely agreed upon benefit of sealers is that they limit stains.
Enhanced aesthetic: The paver sealer enhances the curb appeal of your properties and provides perfect finish to the paved areas and at the same time stabilizes the joint sand by locking it in place. It protects the pavement against harmful UV rays and prevents fading.
How long should I wait before sealing my new pavers? Typically 60-90 days. The main reason to wait is so that efflorescence can work its way to the surface and be cleaned off. The more the pavers get wet, the quicker this happens.
Brick pavers absolutely, 100% need to be re-sanded prior to sealing. The sand in the brick paver joints serves MANY integral purposes. Keeps joints stable, pavers level,and fills the void between pavers to keep them from becoming loose and wobbly.
Although the Universeal range of paving sealers only take a few hours to dry, it is probably best not to walk on your paving for up to 4 hours. If the sun has been out, then at least 2 hours is recommended. It is also recommended that heavy foot traffic should be avoided for 7 hours.
If the sealer is not cured correctly, water can cause white marks or stains on your pavers and can even be trapped beneath the layer of sealer. It is very important not to walk or drive on sealed pavers at least 24-48 hours after application. A protective sealer enhances the natural color and beauty of your pavers.
We alway recommend 2 coats of sealer for optimum performance.
If a white haze appears on sealed pavers, it is less likely that the white spots are efflorescence but rather, water condensation collecting underneath the sealer. Removal is still possible, but a chemical solution is required. If your sealer is oil-based, the fix is to re-emulsify the sealer with Xylene.
The pressure washer in combination with a dirt cutter is an excellent option. This removes not only weeds and moss from the surface, but also from indentations. Keeping up with this type of cleaning means that there is less time for weeds to grow. It also helps to maintain the beauty of the paving stones' surface.
Fall or spring is a great time of the year to seal pavers. Cooler weather allows the sealer to penetrate into the pavers unhindered. Pavers will have an adequate amount of protection for when it's time to seal again. Make sure to keep leaves and other debris off the pavers while they are drying to avoid blemishes.
One of the best paver sealers is the Siloxa-Tek 8500. It is a penetrating concrete sealer designed to treat a variety of applications with an emphasis on hydrophobicity and reduction of water uptake. It dries completely clear with a natural finish that will not change the look or appearance of the susbtrate.
It will not alter the color of the paver but will instead highlight the hue of the material and enhance the color of the pavers. Plus, the color will stay looking new because sealers provide protection against UV rays that can cause fading.