Running your filter after shocking your pool is a must and is just as important to your pool as shocking it is. Be sure to run your filter for at least 6 hours, but shoot for 24 hours to several days, if your pool is particularly dirty or has algae, to properly circulate the chlorine and clean the water.
Ensure the pool pump is running. Pour the mixture from the bucket into the water around the edges of the pool. Let the pump run for about 6 hours or more and test the water. Don't use the pool right away – wait for the free chlorine levels to drop to 1 – 3 ppm before it is safe to swim.
Shock-chlorination is an essential and effective method of cleaning the pool. But you need to have the pump circulating the water for this to be effective.
You cannot run your pool pump every other day because the standing water can pose a health risk as it can quickly accumulate bacteria and fungi. It is crucial to run the pump every day for 8 hours (in one or multiple sessions), so the entirety of the pool's contents run through the filter once.
Pour the liquid chlorine into the pool with the jug as close to the water surface as possible in order to prevent splashing. Add the liquid chlorine to the deep end of the pool. After all of the liquid chlorine has been added, brush the walls and floor of the pool.
Never close the cover immediately after shocking the pool. It is recommended to wait several hours before closing the cover. Use a test kit to regularly test the pool water. If the tests results are good, this does not imply the water chemistry was good prior to your current test results.
This is why many pool experts recommend that you turn down, or shut off, your saltwater chlorine generator (SWG) while you're shocking your pool. Otherwise, you're running the risk of damaging the salt cell. And that could lead to it not generating enough chlorine after the shocking process finishes.
Pools can immediately turn green after shocking when they have metals like copper in the water. These metals oxidise when exposed to high levels of chlorine which makes the pool water turn green. Adding a metal control product such as Zodiac Metal Remover will help to restore the pool water.
A pool filter should be run for a minimum of 6 hours after shocking a swimming pool. This is to allow the filter to clean the water and give the shock enough time to fully mix with the pool water. Running the filter after shocking for 24 hours to 7 days is necessary if the pool has a large amount of algae.
Keep your pump and filter running. Give the shock a good 12 to 24 hours to work it's magic. If the algae hasn't cleared up after 24-48 hours, clean and brush the pool and add another shock treatment.
How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.
Superchlorinate after rainstorms or heavy pool use, but for algae, chloramines or contamination, you will need to use packaged pool shock. In summary, shocking a saltwater pool is no different than shocking any other chlorine pool.
BUT, if you have to shock your pool during the day in broad daylight, you can still swim after adding shock. It's recommended that you wait one hour after adding shock with the filter running, and then test the water to confirm the pH and chlorine are in the proper range before letting anyone enter the pool.
While green algae are endemic in salt water pools, they are the easiest to kill. Green algae tend to grow during summers when the temperatures can get high. They float freely in the pool, making the water green. You might even see them growing on the bottom of the pool, on the walls, or in the crevices.
Is It Safe To Run The pool Pump With The Pool Cover On? It is safe to run the pool pump and filter with a swimming pool cover on. The pool cover doesn't in any way stop or hinder the pool pump from circulating the water or carrying out its function.
While you can safely put your cover back on the pool right after you've added chemicals, it's always best to wait 30 minutes to an hour, just to help your cover last longer. And definitely always remove it while shocking your pool and keep it off until chlorine levels return to normal (about 1-2 ppm).
Maintaining chlorine levels of 10ppm or higher for extended periods of time can not only ruin your liner and cover but also severely damage your pool equipment. Chlorine should be maintained ideally between 1.5ppm to 3ppm.
Chlorine is a sanitizer, and (unless you use Baquacil products) is necessary for maintaining a clear and healthy pool. Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly.
Wait until the chlorine level in the water drops down to 1-4 parts per million (ppm) before allowing swimmers back into the pool. If the water still looks a little cloudy after the shock treatment, you may want to use a water clarifier before allowing swimmers back into the pool.
Wait until the shock process is complete, then put in the salt. It'll dissolve right away and be ready for the SWG by the time you get ready to use it.
The slimy feel on your pool walls is an early indication of algae growth. To stop algae growth in its tracks, clean the pool filter first. Before adding any chemicals to the pool, make sure you have a clean filter. Cartridge, sand or diatomaceous earth filters all have their own backwashing methods for cleaning.
Leslie's Power Powder Plus 73 is great for overall pool clean-up when chlorine levels are below 2.0 ppm. It is the strongest shock, providing 73% Calcium Hypochlorite and 70% Available Chlorine.
It's pretty tough to over-shock your pool; shocking your pool two days in a row with the proper dosage for your pool volume shouldn't be a problem – and in fact, is sometimes even needed to rid your pool of algae and other contaminants.
In theory, if you have a cloudy swimming pool, you can add chlorine to “shock it” and clear things up. Chlorine will get the job done. But, the amounts may vary and you may have to really pound the pool with chlorine to get the water totally clear.
The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool's size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool's turnover rate is.