Hot air rises and cool air sinks. Therefore, opening the right return vents in the summer and winter significantly improves the distribution of air by your forced-air system. You'll also enjoy more even
Closing supply vents throws your heating and cooling system off balance, creates airflow problems, and makes the system work harder. That's why it's better to keep all the vents open for optimized airflow and energy efficiency.
Return vents are usually larger than supply vents and are in large rooms in the home. The return vents in your home help equalize the pressure that changes as your HVAC system heats or cools your home. These vents should never be fully closed because closing them off restricts airflow and strains the system.
When it comes to cooling your home, return vents are best installed near the ceiling so they can draw in any hot air that has risen. Supply vents should also be placed high on the wall for better distribution of cold air throughout the room.
Conversely, in the Winter heating season, you will want to pull the coldest air back to the furnace to be warmed and create circulation. In these months, you'll want the lower air return open and the upper air return closed.
If you have a top/bottom return vent setup, close the top vents in the winter months. Closing the top vents will make your system draw in air from the bottom vents that are at the low point in the room where cold air settles.
One way to help combat this problem is to modify your cold air return ducts for better airflow. Whenever possible, expand your existing ducts vertically by cutting out pieces of wallboard and installing a new cover and air filter to fit.
Hot air rises and cool air sinks. Therefore, opening the right return vents in the summer and winter significantly improves the distribution of air by your forced-air system. You'll also enjoy more even heating and cooling throughout your home. In the summer, open your high returns and close the low ones.
We recommend keeping vents and interior doors open as much as possible for the best airflow. If comfort is an issue, try closing certain vents partially.
If you prioritize heating, put the HVAC and vents in (or below) the floor. This principle works for return heating vents as well. Place returns for cooling in the ceiling where the warm air congregates and heating returns in or near the floor where the cold air congregates.
Down Low: if you have your air return lower on your wall it will function better as a cold air return. This will allow your air return to draw in cold air as it sinks to the bottom of the room. Making it more efficient at recirculating this cold air through your furnace to repeat the heating cycle.
Dirty filters, leaky ducts, and poor insulation can cause cold return vents. Leaky ducts often cause cold air to blow even after cranking the heat up. 20-30% of air, especially hot air, is lost because of leaky ducts. Cracked, holey ductwork needs sealing or replacement.
The fan's speed won't slow any more when you close off the returns, and it creates positive air pressure. Instead of easily pulling air from the closed-off return, it will suction it through any cracks and gaps it can around windows, exterior walls and doors.
The filter belongs on the return side of your HVAC's furnace and AC system. It's a “must” to have one there. And if you have a return air filter of the right size that is properly installed, then there is no need for a supply vent filter.
Avoid blocking air vents with pillows, furniture, plants, or pictures. When the air vents are blocked it means that heated or cooled air needs to squeeze by what is blocking it to reach the rest of the room.
Lower air return vents help pull air back to the HVAC system for reheating or cooling. While it's safe to adjust supply vents to direct or restrict airflow, return vents should always remain open to maintain consistent air pressure and prevent system strain.
Return air vents connect to your return ducts, and they're typically larger than supply vents. Again, depending on the design of your ductwork and home, HVAC return vent locations vary but are often in central areas, kitchens, bathrooms, and pollutant-prone areas so as to best collect stale or dirty air.
Closing vents in individual rooms will not help your energy cost, but actually hurt your system. “Closing vents puts a strain on the system, which in turn causes the system to work harder,” Martin says.
Cold air return vents should typically be placed lower on the walls or the floor since cold air naturally sinks. This placement helps capture the cooler air faster and more efficiently, allowing it to be recirculated through the HVAC system for heating or cooling.
Symptoms include weak airflow and uneven cooling or heating throughout your home, with some rooms feeling much cooler or warmer than others. Homeowners should regularly check vents for consistent airflow. If you notice a significant drop in air pressure or uneven temperatures, it could indicate return air issues.
A second return duct can lower static pressure if the airflow bottleneck is on the return side. If the static is on the supply side, adding a second return will do nothing. So it's usually a good idea.
If your AC is cooling but not working properly, it could be due to issues like a clogged filter, low refrigerant, or a malfunctioning thermostat. Other possibilities include a faulty compressor, dirty coils, or blocked vents, all of which can affect the system's performance.
Ideally, there should be a temperature differential of around 14° to 20° Fahrenheit between the incoming air and the air being blown out by your air conditioner. This means that if the air entering the system is 75°F, the air coming out of the vent should be between 55°F and 61°F.
One per room is ideal, but placing two or three in central locations can provide enough air circulation to maximize the energy efficiency of your HVAC and optimize indoor air quality, so your family stays healthy. If your home has multiple stories, you should have at least one return air vent per floor.