Yes, there is a big difference, primarily in thickness and intended use, rather than just thermal performance.
The higher the R-value, the better the insulation performs. Think of it like SPF in sunscreen: R13 provides decent protection, while R19 offers more heavy-duty protection.
Fiberglass and rock wool batts—2x4 walls can hold R-13 or R-15 batts; 2x6 walls can have R-19 or R-21 products.
R-values rate how well building insulation can prevent the flow of heat into and out of the home. Higher ratings mean greater insulation performance and thus more savings on your next heating and cooling bill.
When it comes to fiberglass and mineral wool insulation, there is no major functional difference between R13 and R15. Both are designed to fit perfectly inside a standard 2x4 wall cavity (3.5 inches thick).
It is a common measure adopted by manufacturers, retailers, and even some contractors to ascertain the performance of insulation. Although R-value is important, it will not help you save on your power bills. The fact is, the energy efficiency of your home does not just rely on a number.
R-19 insulation is a medium-to-high thermal resistance material primarily used to prevent heat transfer in exterior walls, attics, floors over unheated spaces (like garages), and crawl spaces.
Installing new insulation over old is a viable option for keeping your home warm in the winter and cool in the summer. However, the current insulation must be in good condition. It's vital that a professional insulation technician inspect your current insulation before adding another layer.
Mice are curious and always searching for safe, snug, and warm nesting sites. Attics filled with blown-in insulation provide an excellent option–from the mice's point of view. As long as there is a ready food source. Mice are omnivorous and will eat and chew on almost anything including wood and electrical wires.
What time of year is Insulation cheapest?
Foam insulation is a common target because it's easy for them to chew through. The material offers little resistance, allowing mice to create tunnels or nests within the insulation. But mice aren't just interested in chewing for the sake of it—they're also drawn to the warmth and shelter insulation provides.
It's recommended to leave an air gap insulation of at least 25mm or 1 inch for the walls and ceilings. This should be enough to allow for ventilation and prevent moisture buildup. The same rule may be applied when using foil insulation. On roofs, the air gap should be larger, typically around 50mm or 2 inches.
Yes, R-19 insulation is "better" at resisting heat transfer than R-15, but it is strictly meant for 2x6 walls. The best choice depends entirely on your wall framing:
Typical recommendations for exterior walls are R-13 to R-23, while R-30, R-38 and R-49 are common for ceilings and attic spaces. Use the JM insulation calculator to determine the recommended R-value for your project, as well as how much insulation you'll need.
When balancing upfront cost and overall thermal efficiency, the cheapest and most effective standard insulation is fiberglass batt insulation. However, if you are looking for long-term savings through superior air sealing, dense-pack cellulose often provides the best overall value.
Thermal Resistance: R-21 polyiso boards offer higher thermal resistance compared to R-19, which makes them more effective at reducing heat transfer in colder climates.
The Amish control mice through non-chemical, self-sustaining methods, relying on active trapping, natural scent repellents, and structural exclusion. Rather than using commercial poisons, they focus on physical barriers and natural predators to keep rodent populations in check.
Because spray foam can trap moisture, hide the condition of the roof, make it difficult for surveyors to inspect, which means risks like timber decay, dry rot, and not forgetting increased fire risk. If you've got it or you're buying a property that does, this is something you need to know upfront.
Closed-cell spray foam and rigid foam board are hard, unattractive to rodents, and double as air barriers. Mineral wool is dense enough to discourage nesting. Fiberglass batts, especially in crawl spaces and attics, are essentially an open invitation.
Yes, you can put insulation over standard electrical wires (like Romex or NM-B) inside wall cavities. However, how you do it matters. Wrapping wires too tightly or laying too much thick insulation over them can trap heat, which is a fire hazard.
Cellulose Insulation
The typical lifespan is 20 to 30 years, with degradation beginning as early as 15 years after installation. As with other types of insulation, severe weather or outside interference can reduce the lifespan.
Cellulose Blown-In Insulation or Spray Applied Insulation. Covers 48.8 sq. ft.
The cheapest way to insulate walls depends on whether you are doing a new build, finishing a garage, or retrofitting an existing, drywalled room.
R-Value is a measure of insulation's ability to resist heat traveling through it. The higher the R-Value the better the thermal performance of the insulation.