Cons of Outdoor Concrete Staining
Transparent: The semi-transparency of most stains will fail to hide the existing imperfections in the concrete surface. DIY is not easy: Staining concrete is the not the easiest job for the amateur weekend warrior. Using a professional contractor ensure best results.
Stains enhance the appearance of the surface; they don't conceal defects. Applying it to flawed concrete will not hide its imperfections, nor will it mask the original color or texture of the surface. Ensure the surface you want to coat, whether old or new, is free of such visible faults.
Depending on the concrete sealer used, it's usually recommended to seal the concrete every couple of years to keep the color from fading. If you choose a high-quality concrete stain and sealer, you may be able to shorten the period between resealing to every 3-5 years.
Concrete staining penetrates deep into the surface, creating long-lasting durable floors. These floors will not fade, chip, peel or wear out in any way. Sealed with an epoxy topcoat, the product is well preserved. With the ability to transform any area, concrete staining can create a variety of looks.
Stained concrete can be an excellent choice for your residential house. Due to light foot traffic experienced in residential stained floors, a simple cleaning may renew their fresh look for many years.
Although concrete stain is permanent and won't flake off like paint, it penetrates only the top layer of the surface and will eventually wear away as the surface is worn by traffic or weather exposure. You can prevent this wear and prolong the life of your stained concrete by protecting the surface with a clear sealer.
Stained concrete costs roughly $2 to $14 per square foot, while hardwood floors cost between $6 to $25 per square foot. Stained concrete is about half the cost of hardwood flooring.
Spread The Love! Concrete floors that are stained and sealed don't just look beautiful but are also very durable. But this does not mean they are invincible. If you don't take good care of them, they can develop scratch marks, become dull, and wear out over time.
To sum it up, most interior projects and all exterior projects choosing between concrete stain or paint are likely better served by a stain solution. Furthermore, horizontal surfaces are best benefited from an acid stain, while vertical surfaces require a professional mineral stain solution.
An attractive and expertly finished garage floor can greatly improve the aesthetics of your home's interior and add to the overall appeal. It not only increases the functionality of your property but also maximizes the resale value when you decide to sell your home someday down the road.
No, the vibrancy and color tone in acid stains do not fade. However, the physical top layer of concrete which contains the stain can be worn away through use, which can give the appearance of fading. Stone Surface Specialists can apply a special sealer on your newly-stained concrete to prevent this.
A basic cleaning routine for concrete should include: Dry mopping to remove debris and dirt and prevent abrasion. Cleaning spills as soon as possible to prevent stains. Damp mopping as necessary with water and a mild detergent.
When properly designed and installed, acid-stained concrete and decorative concrete overlays are almost completely unaffected by water. Moisture may and does pass through the concrete and sealer used in acid stained concrete flooring, but as it evaporates, it leaves no lingering effect.
Stained concrete is by far the most common type of concrete finish. This is due to stained concrete's versatility. Stained concrete can be installed on both freshly poured and existing slabs to achieve a wide variety of finishes, and is commonly used in both residential and commercial installations.
Usually this white or off-white discoloration to concrete and masonry forms when soluble salts and other water dispersible materials come to the surface through capillary voids as a result of temperature changes, moist migration, condensation, rain, dew, and/or too much water in the mix.
The concrete must be 28 days old or at least have cured to one uniform color prior to acid staining.
Your existing old concrete should be fine to stain, so long as it is not contaminated with glue, paint, oil, grease, sealers, waxes, or anything else that would prevent the stain from soaking into the pores of the concrete.
Epoxy covering is an excellent choice if you need to cover up damage; thus, many commercial work environments opt for epoxy. If you want to improve the look and texture of a concrete surface, stain it to look like natural stone, and achieve a solid, long-lasting color.
Two coats are usually sufficient. Before resuming traffic on the surface, be sure the stain has dried for the manufacturer-recommended time. On exterior surfaces, you can apply a solvent-based, solid-color concrete sealer.
Like any hard, smooth surface, stained concrete can become slippery when wet, especially if it has been coated with a high-gloss sealer. For concrete floors or walkways exposed to moisture or in areas with a lot of foot traffic, there are ways you can increase the slip resistance without affecting the color.
Clean the concrete with a solution of Concrete Cleaner & Degreaser and water. Observe after cleaning whether water is beading up over any oil spill area. If there is no indication of a spill that needs attention, rinse the concrete thoroughly, allow it to dry, and proceed with staining.
In average conditions, your paint or stain will be dry to the touch within 1-2 hours, but you should not walk on it for probably 4-6 hours. In cooler weather or during periods of high humidity, you will need to wait even longer than this.