Natural stone should be cleaned once a week with a pH-neutral cleaning product like Simple Green All-Purpose Cleaner.
Acidic commercial cleaners and those containing harsh chemicals, like bleach, can damage and dull natural stone surfaces.
Keep It Simple to Clean Natural Stone
You can use any type of mild soap detergent, such as dish or hand soap, and mix it with a little water. Wet the stone first, and then use a bristle brush and soap solution to wipe the stone clean. The last step is to make sure you rinse thoroughly.
Some cleaners are too abrasive or acidic for granite. Never use vinegar, glass cleaner, or bleach to clean your countertops, as these harsh substances will dull the granite and weaken the sealant. For best results, use Simple Green Granite & Stone Cleaner to ensure your granite counters have been properly cleaned.
Restrictions on Use: Do not use on non-rinsable surfaces. This product is not classified as hazardous under 2012 OSHA Hazard Communication Standards (29 CFR 1910.1200). Inhalation: Not expected to cause respiratory irritation. If adverse effect occurs, move to fresh air.
This powerful cleaner and degreaser is EPA Safer Choice Certified, designed for effective and environmentally safer use on counters, carpet, floors, fabric, equipment, vehicles and more. Concentrated formula provides up to 30x the cleaning value.
Clean stone surfaces with warm water and a mild soap such as a clear Dawn Liquid Soap. Do not use products that contain lemon, vinegar or other acids on marble or limestone.
'Avoid over-cleaning it as this will destroy the patina of age which gives the floor its character. If necessary, work gently using a non-acidic cleaner, such as washing soda, a soft scrubbing brush or mop and clean water, but never soak the floor.
It's essential to only use cleaners which are appropriate for natural stone surfaces. This means avoiding using vinegar. Stones like limestone, marble, or travertine will react to vinegar because it's an acidic cleaner with harsh effects.
To maintain the luster and shine of your natural stone, use a stone-safe polish about once a week. To polish stone, simply spray the polish directly onto the surface, then buff the surface until it's dry with a lint-free cloth or dry paper towel.
Not sealing a stone countertop or floor tiles — which get the heaviest traffic and are the most susceptible to wear and tear — leaves the surface vulnerable to absorbing foreign substances, which can weaken the stone and potentially lead to the growth of bacteria.
Clean stone surfaces with a few drops of neutral cleaner, stone soap (specific products from Lithofin for example), or a dishwashing detergent and warm water. Use a clean soft cloth for best results. Too much cleaner or soap may leave a film and cause streaks.
Simple Green Stone Cleaner is perfect for regular use on marble, granite, quartz, travertine, porcelain, limestone, ceramic, porcelain, Corian®, Silestone®, and other engineered stone.
For extremely stubborn hard water or mineral buildup on non-stone tile showers, your best choice may be Simple Green Lime Scale Remover. Be sure you test the product on a small, inconspicuous area before cleaning, and do your best not to get any overspray on colored grout.
Baking soda is known as a stain remover. It can help to remove liquid stains such as tea, wine or coffee. It also helps to remove the unpleasant smells. It is quite affective on solid surfaces in general but it is not advised to use baking soda directly on natural stone surfaces.
Quartz is an incredible material and easy to clean.
The beauty of natural stone with the durability of a manufactured one. For heavier stains, glass or surface cleaners will do the trick since quartz is non-porous and you don't have to be as finicky with the pH as you would with granite.
Rubbing alcohol is a natural bactericide and can also kill fungus and viruses. It has no ill effects on your granite or the seal on your granite so it's an ideal way to keep countertops clean. The list of disinfectants that are harmful for granite countertops is very long.
When using Dawn Powerwash, you should avoid cleaning porous surfaces such as marble and other soft natural stones or untreated wood. It is also best to keep Dawn Powerwash away from painted surfaces, too.
Apply solution. Leave on heavy soils for 1-2 minutes. Scrub if needed. Rinse or damp-wipe with clean water.
Most cleaning jobs are effectively performed at the general cleaning dilution ratio of 10-30 parts water to one part of Simple Green -- some at even greater dilutions when heat, spray and agitation are added, making the product extremely economical.
Simple Green is non-abrasive and non-corrosive, making it safe for use on a wide range of surfaces. It also carries the U.S. EPA Safer Choice label, ensuring that it works well, is effective, and is safer for people and the planet.