Whether premixed grout is "better" depends entirely on your project. Premixed is significantly more convenient and stain-resistant, making it excellent for backsplashes and small DIY jobs. However, regular (powdered) cement-based grout is more durable for heavy foot traffic and fully submerged areas.
Whether premixed grout is "better" depends entirely on your project. It is not universally better, but it is highly convenient and stain-resistant, making it a fantastic choice for walls, backsplashes, and smaller DIY jobs rather than heavy-duty floor installations.
Jim Whitfield, manager of Technical Services at Mapei told industry professionals, “Because epoxy grout is so tough, it wears extremely well. It doesn't wear down over time and become a tile gutter—like cement grout can—where all the dirt and liquid and junk collects.” Epoxy grout is a reactive grout.
The best grout for Saltillo (terracotta) tile is a heavy-duty, sanded Portland cement grout formulated explicitly for wide joints (typically 1/2 to 114 inches). Standard thin grouts will shrink and crack in these large gaps. Top industry choices include MAPEI 2-1/2 to 1 Saltillo Tile Grout and Custom Building Products Saltillo Grout Mix.
The best grout for travertine is epoxy grout or a high-quality, polymer-modified cement grout. The ideal choice depends on your joint width and application area, but epoxy is widely preferred for its stain resistance, waterproof nature, and lack of required sealing.
DON'T use abrasive scrub pads or powders
Scouring pads, steel wool, and abrasive powders scratch travertine's surface, creating dull tracks and exposing raw stone to staining. Even 'soft scrub' products contain micro-abrasives that accumulate damage over time. Use only soft microfiber cloths and soft-bristle brushes.
Yes, you should highly consider sealing travertine before grouting. Because travertine is a highly porous natural stone, unsealed tiles can absorb pigments and moisture from the grout, which can permanently stain the stone or make cleaning the grout haze incredibly difficult.
Grouting mistakes make your tile project look less than perfect—despite all of your hard work. Common errors include adding too much water to the grout mix, holding the grout tools wrong, and neglecting timing.
Yes, Dawn dish soap is excellent for cleaning grout because its gentle, grease-cutting formula will not strip sealers or discolor tile. For everyday maintenance, simply mix a dime-sized squirt of Blue Dawn in a 32-oz spray bottle of warm water. For tougher grime, you can upgrade to a deeper-cleaning DIY mixture.
Epoxy grout: the modern performer
This type of grout is perfect for kitchens, bathrooms, and commercial spaces where spills and moisture are frequent. Pros: Highly durable, stain-resistant, easy to clean, long-lasting.
The most common types of grout are epoxy, sanded and unsanded. Epoxy grout is made of resins, silica fillers, pigments and hardener. Sanded and unsanded grouts are cementitious grouts.
Let the grout set for 15 to 30 minutes and then begin gently wiping off the excess grout with a clean, damp sponge.
Another option that's great for low maintenance kitchen floor tiles is epoxy grout. This type of grout is made from epoxy resins and a filler powder that's not cement. The key advantage to this material type is that it's non-porous, waterproof, and stain resistant.
Select the most prominent color in the tile and go with a similar shade of grout. For example, a shade of orange grout works for tiles that are a blend of grays, greens and rusty oranges, unless you want to go for contrast. Tintable grout is a newer alternative to pre-colored grout in indoor applications.
One of the first signs of a sloppy job is grout lines that don't line up, or messy cuts. These are obvious aesthetic signs that the contractor is cutting corners. Even worse and less obvious are uneven tile surfaces, what's known as lippage.
Premixed grout typically lasts for 12 to 18 months in an unopened container from the manufacturing date. Once opened, it should ideally be used within 6 months. To maximize its lifespan, store the bucket in a cool, dry place and make sure the lid is completely airtight.
Hotels keep glass shower doors spotless by combining strong commercial cleaning agents with routine maintenance and smart preventative coatings. Because they deal with heavy daily guest turnover, housekeeping staff rely on quick but highly effective strategies to prevent soap scum and hard water buildup.
The "best" grout cleaner depends on the type of dirt you are fighting. For heavy, ground-in floor grime, Zep Grout Cleaner and Brightener is widely considered the top commercial choice. For bathroom mold and mildew, bleach-based sprays or a DIY hydrogen peroxide and baking soda paste are highly effective.
Just a few more important points: As the grout can absorb the soap as well as a stain, do not clean with oil or wax based cleaners (Murphy's Oil soap, Pine Sol, etc.). These products will leave a waxy or oily film in the grout. Even good alkaline cleaners, if not properly rinsed, will leave a sticky soap film.
Achieving a flawless grout job comes down to proper preparation, exact mixing ratios, and impeccable timing. The most critical mistakes to avoid include: using the wrong grout type for your joint size, over-watering the mixture, and wiping the tiles down too early.
5 Tacky Bathroom "Upgrades" That Instantly Make Your Home Look Bad, Designers Say
Builders often skip sealing grout to cut costs, save time, and avoid returning to the job site. Additionally, many modern polymer-modified grouts are stain-resistant, and sealing un-cured grout can trap moisture. Some installers even use it as an upsell or exclude it because sealing can leave a hazy film on certain tiles.
Vinegar is acidic and can damage travertine, which is a type of natural stone. When vinegar comes into contact with travertine, it can etch the surface, causing dull spots, discoloration, and erosion. It is best to avoid using vinegar or other acidic cleaners on travertine.
Bathroom tile trends for 2026 are all about warmth, texture and quiet confidence ✨ Travertine continues to lead the way, especially in larger formats with minimal grout lines, creating calm spa-like spaces that feel timeless rather than trend-led.
In general, granite is pricier, ranging from $45-$200 per square foot for materials. The added durability offers excellent long-term value despite the higher initial cost. Travertine is less expensive, with prices ranging from $25-$150 per square foot for slab material.