It takes a lot of time and energy to keep a pool sparkling clean, but the good news is that pool automation offers significant time savings, less downtime, and makes preventative maintenance a breeze. There are many benefits of swimming pool automation — here are 4 that will change the way you look at pool maintenance.
Pool automation uses a control panel to control certain pool functions remotely through actuators and relays—most commonly the pump and heater, but it can also extend to lights, water features, and spas. Bonus: some extra-modern automation systems connect long-distance via smartphone app or virtual assistant.
Pool automation systems can be less expensive than many other pool features and accessories. A pool automation system can cost anywhere from $1,800 to $4,000.
Absolutely! If you're not convinced yet, save money on your initial purchase and hold off on automation until you're ready. Unlike underwater lights and waterfalls, pool automation isn't built into your pool or spa. It's a feature that can be added on later.
Control Your Pool Pump & Heater Via Your Phone From Anywhere In The World! The HeaterReader is smart pool hardware with an App that gives you remote access to any gas, propane or electric swimming pool heater and pump - without the expensive and complex installation that is required by other devices.
It's best to run your pool pump during the day
Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!
A variable speed pool pump could save you up to 90%* on your energy costs compared to a conventional single- or two-speed pool pump. They are often quiet when running and many offer built-in programming features and better filtering capabilities.
According to the World Health Organization, water temperatures ranging from 78 to 86 degrees Fahrenheit are generally comfortable and safe for those engaging in moderate physical activity in a pool.
How Much Does it Cost? Hayward OmniLogic installations can start at $2,800.00 and run upwards of $4,500.00 depending on added accessories.
Pool management involves being able to mold or shape your workforce so it's easier for your employees to respond to new market trends and ever-changing customer demands.
A pool timer, or pool pump timer, is a crucial device if you want to keep your pool clean without a high electricity bill. If you don't have a timer, your pump will run until you switch it off. If you fail to turn it off, it will keep running (and eating into the electricity bill).
The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.
Every pool must turn over at least once a day, so most pool pumps should run approximately 8 hours a day. But here's the thing: you don't have to run your pool pump consecutively. You can choose to run it for three hours in the morning before you leave for work and another 5 hours in the evening.
Plug in the pool pump and cover it with a weatherproof cover. With the main service off to the house, wire in GFCI circuit breakers to the electrical panel. Connect an 8-gauge wire to the metal posts of the pool, the pump, and the metal plate on the skimmer and then wire that to the pump to bond the entire pool.
Receptacles for pumps and motors must be located between 6 and 10 feet from the pool walls, and they must be GFCI-protected and locked. Outlet receptacles for general use can be no closer than 20 feet from a pool or in-ground spa if they are not GFCI-protected, and no closer than 6 feet away if they are GFCI protected.
The most common reasons for a pool pump circuit breaker to trip are an overloaded motor, underrated pump breaker, bad motor windings or other earthing issue, moisture in the motor or moisture in the wiring.
The heater can be remotely controlled using the firemans switch. That is the way pool automation controls heaters. It is just a 2 wire low voltage line that when connected the heater fires and when open the heater is off. You can run the firemans switch line into your house and control it by any SPST switch.
Unlock Configuration Menu To unlock the Configuration Menu, repeatedly press the Menu button until "Configuration Menu" is shown in the Menu Display. Press and hold the Menu Display for 5 seconds. Refer to your pool control's manual to determine what options are offered within the Configuration Menu.
INTELLIGENT POOL CONTROL FROM YOUR SMART PHONE OR TABLET. iAquaLink allows you to control your pool anytime, anywhere. Using our free app, you can control all the elements of your pool or pool/spa system, even when you're on the go. Have the pool or spa ready to use as soon as you get home.
What type of color lights are supported with iAquaLink? iAquaLink supports color lights manufactured by Jandy®, Pentair® and Hayward®.