Pine-Sol is also safe for luxury vinyl wood plank flooring and vinyl tile flooring, so long as used with a dry mop and you do not saturate the floors.
Here is a helpful list of products that you can use to clean any of Morbern's vinyls: Clorox ® Hydrogen Peroxide Disinfecting Cleaner This kills bacteria and viruses in 30 seconds. BLEACH-RITE ® Disinfecting Spray with Bleach, Current Technologies This is a hospital-grade pre-mixed cleaner with bleach diluted 1:10.
A: We do not recommend using Pine-Sol® Original Multi-Surface Cleaner on aluminum, copper or marble surfaces. We also do not recommend using Pine-Sol® Cleaners on cars, on dishes or as a pet shampoo.
Vinyl flooring should be dry-mopped or vacuumed daily or weekly and—when a deeper cleaning is needed—damp-mopped with a pH-neutral cleaning agent formulated for use on vinyl or with a mild solution of equal parts distilled white vinegar and water mixed with two to three drops of dish soap.
Pine-Sol Multi-Surface Cleaner – Yes, Pine Sol on vinyl floors is a fine option; however, use sparingly with water. Do not oversaturate your vinyl floors with too much water, use just enough to disinfect the floors.
A good old-fashioned sponge mop and water work quite nicely to clean vinyl flooring. Vacuum and mop regularly, approximately once or twice a week, and address any spills, wiping them up pronto with a pH neutral cleaner.
Generally speaking, most luxury vinyl planks can be cleaned using soap and water and don't require a special LVP cleaner. A dishwashing soap like Dawn is the best way to clean vinyl plank flooring because it will cut grime and grease without stripping your floors or damaging the wear layer.
You don't need to dilute Lysol's multipurpose cleaner because you can use it at full strength on vinyl floors. Once you apply solution to the entire floor, allow it to sit for about five minutes to fully disinfect the floor. Frequently rinse and wring out the mop when it gets dirty.
In 2022, certain Pine-Sol cleaners were recalled due to a potential health risk involving harmful bacteria.
Pine-Sol is a highly alkaline cleaner, and while this makes it great for cutting through grease, it can damage the finish on hardwood floors, leading to premature wear and tear. Mixing Pine-Sol with other cleaners could even exacerbate this.
Step 4 Scrub stubborn messes or stains with full strength Pine-Sol®, using a microfiber cloth. Finish by rinsing with water.
To clean your vinyl records, grab a microfiber cleaning cloth to remove the dust and static from the record. Next, dampen a clean microfiber cloth (preferably with distilled water) and lightly wipe the record surface in a circular motion — but steer clear of the middle of the record.
Disinfecting Wipes including Clorox, Green Works, PDI Sani-Cloth HB Wipes, Lysol, Oxivir, Virox, and CaviWipes. Note: Disinfecting wipes that contain bleach are acceptable on vinyl. 7.5 to 9 is the recommended pH for bleach.
There are a few options for treating mold on vinyl that you may already have on hand. Lemon juice and distilled white vinegar are non-toxic and effective in killing many mold species. Denatured or rubbing alcohol (the higher the percentage, the better) can also be used and are less acidic.
Pine-Sol Multi-Surface Cleaner is a suitable option for vinyl floors, but it should be used sparingly with water.
Using natural substances like vinegar or baking soda can an effective, gentler cleaning method. In addition, removing stains from vinyl tile, planks or sheet vinyl flooring this way is more budget friendly and safer for pets. Baking soda is a natural method that avoids harming the finish.
“Ammonia or bleach-based cleaners that may discolor the vinyl aren't the best idea, and wax or polish isn't the best to use either, as many vinyl floors have a no-wax finish,” warns Stein.
Avoid using bleach or ammonia-based products. Stick to manufacturer-approved cleaners. Do not soak floors with excessive water.
Apple cider or even white vinegar are great natural cleaners for vinyl flooring. To create your cleaning solution, mix one cup of vinegar with a gallon of very warm water. Use this for mopping in place of a commercial cleaning solution. To clean up stains, consider creating a baking soda paste.
Microfiber Mop: A microfiber mop is gentle on vinyl floors and effective for cleaning. It traps dirt and moisture more efficiently than traditional mops, which is crucial for avoiding water damage.
If your flooring is waterproof, you can use a wet Swiffer safely, and can get a deeper clean than you'll get with a dry mop. Make sure that you use pads that feature a neutral household cleanser, rather than any harsh chemicals that could damage the flooring.