But if your wood floor is in a high-traffic area, such as a kitchen, it may sometimes require a more concerted cleaning effort. Pine-Sol is an effective cleaner as well as a deodorizer and disinfectant that has been around since 1929, and is suitable for wood if used properly.
You can also use Pine-Sol® Original Squirt 'N Mop®. It's safe for wood and hard nonporous surfaces like ceramic and porcelain tiles, and also sealed granite. You can apply this product directly from the bottle over a 3' x 3' area and start mopping.
Usually no rinsing required. On wood surfaces, do not allow puddles of cleaner to remain. *Not recommended for use on unfinished, unsealed, unpainted, waxed, oiled or worn flooring.
Vacuum, dust or wipe with a lightly dampened mop – never use soap-based detergents, as they can leave a dull film on the floor, and avoid over-wetting. Don't use wax polish either, as this will make the floor slippery. To remove marks and stains, use a dilute solution of water and vinegar.
Mr. Clean antibacterial cleaner came in second. It was praised for being the best multi-surface cleaner for big jobs. Pine-Sol Original came in third place and was praised for its ability to remove grease, soap scum, and food stains.
Pine-Sol vs Bleach
Bleach is great at disinfecting and whitening toilets, tubs, clothes, and sinks. On the other hand, Pine-Sol is used to break down grease and clean household floors. Still, each of these products should be used separately. That way, the fumes produced do not react to create toxic chlorine gas.
You can also use Pine-Sol® Original Squirt 'N Mop®. It's safe for wood and hard, nonporous surfaces. You can apply it to the floor directly from the bottle.
Some of the problems that can be caused by inhaling Pine SOL
However, the most common health problems are listed below: Irritation of the mucous membrane. Nausea and headache. Loss of consciousness.
Many different scents of Pine-Sol now exist today that can fill your kitchen with a pleasant aroma. The cleaning solution can be used many surfaces, such as vinyl, tile, porcelain and other nonporous surfaces. Pine-Sol removes dirt and debris and it also disinfects floors, which makes it ideal for the kitchen.
According to Pine-Sol, you should refrain from using undiluted Pine-Sol on metal surfaces, such as copper or aluminum.
You can use Pine-Sol® cleaners on hard, nonporous surfaces, including floors, sinks, counters, stoves, bathtubs, shower stalls, tile and more!
Full strength Pine Sol is made with real pine scent, just like the commercials claim. The fragrance used is pine essential oil. Grease-cutting surfactants and powerful cleaning agents, water, isopropanol (an alcohol solvent with antibacterial properties) and xantham gum round out the ingredient list.
Or for everyday mess control, keep the Pine-Sol® mixture in a spray bottle for quick cleaning spritzes. Scrub crevices in counters with grout with an old toothbrush. Scrub stubborn messes or stains with full strength Pine-Sol®, using plastic scrubbing pad or cloth. Finish by rinsing with water.
No, It is NOT safe to boil Pine Sol! If you really like the smell, go into any Health Food Store & buy a tiny bottle of Pine Essential Oil. This will cost around $5. You can then add the Pure Pine essential oil to a pan of water & boil it, or put a drop on a light bulb for a scent that will last.
Pine Sol basically reinforces the finish on your laminate floor, leaving it looking shiny and sparkling clean. This is unlike most cleaning formulas that contain harsh ingredients that actually strip off the finish shine and leave the floor looking dull. So yes, Pine Sol does make laminate floor shine.
Pine-Sol® Multi-Surface Cleaner is safe for use on laminate floors. Just choose your favorite scent — we like using Original Pine on laminate floors.
Distilled Vinegar
Common household white vinegar is an effective cleaning substitute for Pine-Sol. Vinegar is nontoxic and since it is acidic, also dissolves stains on hard surfaces. Also, priced at just a few dollars a gallon, vinegar is less expensive than Pine-Sol.
Pine-Sol® Cleaners are concentrated formulas that you can dilute for most jobs. For general cleaning, a 24 oz. bottle gives you 12 gallons of cleaning power! Add water to the formula yourself and save.
If you're wondering if you can mix Pine-Sol and bleach, the short answer is no. You shouldn't mix Pine-Sol and bleach because doing so is extremely dangerous. The active ingredient in Pine-Sol is glycolic acid. According to the Department of Health, mixing chlorine bleach with acid produces chlorine gas.
We use Pine Sol Lemon as our tile floor cleaner because we love the lemon scent, and have even gotten a lot of compliments on the great clean smell. Soak your mop pad: Next soak the wet mop pad in the Pine Sol water.
Fortunately, I have learned two things that keep these critters away and you only need 4 simple items: 2 Spray Bottles, a bottle of Listerine Mint Mouthwash, and bottle of Pine-sol (or eucalyptus oil for a more natural spray). For starters, mosquitoes HATE mint! Pour the Listerine into a spray bottle and spray away!
Purchase activated charcoal powder at pet supply, hardware stores and pharmacies. Place bowls of baking soda around the rooms where the Pine-Sol odor is present. Baking soda is effective in neutralizing odors in the air.
Use it in addition to Detergent. You can add it directly to the drum, or in the detergent drawer with detergent. Do NOT add it in the Fabric Softener dispenser. Pine-Sol is safe for all types of washers, including HE machines.
Pine-Sol is a registered trade name of the Clorox Company for a line of household cleaning products, used to clean grease and heavy soil stains. Pine-Sol was based on pine oil when it was created in 1929 and during its rise to national popularity in the 1950s.