Paver sealant is a great tool to keep paver driveways, patios, walkways, and pool decks, in mint condition, but it's not always necessary. While it's not a must-have, pavers that aren't sealed typically grow weeds in the cracks, lose color over time, and can even have shifting caused by a lack of joint sand.
The basic rule of thumb is every 3-5 years. For film-forming sealants, you will be able to notice when the physical barrier is showing signs of wear. For non-film-forming sealants, you will begin to see a significant color change of pavers during a rain when the sealant is wearing thin.
Unlike natural stone pavers, porcelain pavers are fade resistant and don't need sealing. Also, they can stand up to almost anything nature can throw at it. Natural stone pavers, of course, are Nature's decorative flooring. Travertine, slate, and quartzite can create eye-popping floors, each different from the next.
When you apply a sealant to your pavers, it gives them a clean, wet look with a glossy finish, depending on the finish of the sealant you use. It will not alter the color of the paver but will instead highlight the hue of the material and enhance the color of the pavers.
Using a nap roller for sealer application will take several times longer than using a paver sealer sprayer and joint stabilization is difficult to achieve. Spraying is the preferred method of applying water based paver sealers as it allows enough sealer to get into the joints.
You're wondering what happens if you don't seal pavers. Your pavers won't disintegrate if you don't seal them, but they'll likely fade much sooner than if you applied sealant. You'll also need to clean them more often, and the stains won't be as easy to remove.
Enhanced aesthetic: The paver sealer enhances the curb appeal of your properties and provides perfect finish to the paved areas and at the same time stabilizes the joint sand by locking it in place. It protects the pavement against harmful UV rays and prevents fading.
Then, about 24 hours prior to sealant application, thoroughly cleanse pavers of any remaining residue with Techniseal's Paver Prep, a powerful efflorescence cleaner that will give you a nice clean surface on which to work. Our paver preparator also maximizes sealant penetration and adherence.
Fall or spring is a great time of the year to seal pavers. Cooler weather allows the sealer to penetrate into the pavers unhindered. Pavers will have an adequate amount of protection for when it's time to seal again. Make sure to keep leaves and other debris off the pavers while they are drying to avoid blemishes.
How Much Does It Cost to Clean and Reseal Pavers per Square Foot? In total, you should expect to pay around $2 per square foot to clean and seal pavers. The price may vary between $1 and $3 per square foot, depending on the sealant and method of cleaning.
Never Too Late to Seal Pavers
It's always best to seal soon after a new installation. But, our proven system of repairing, cleaning and sealing will also bring back the original luster to old, dirty and fading pavers. Sealing is the final step in a comprehensive process.
How long should I wait before sealing my new pavers? Typically 60-90 days. The main reason to wait is so that efflorescence can work its way to the surface and be cleaned off. The more the pavers get wet, the quicker this happens.
If the sealer is not cured correctly, water can cause white marks or stains on your pavers and can even be trapped beneath the layer of sealer. It is very important not to walk or drive on sealed pavers at least 24-48 hours after application. A protective sealer enhances the natural color and beauty of your pavers.
Most contractors and manufacturers recommend sealing pavers for the many benefits. Both concrete and brick pavers are porous materials that can change quality and appearance when they absorb liquids.
Rain can wash the sealer off if it rains right after the application. Ideally, we recommend that there is no rain for at least 24 hours after applying the sealer. However, if necessary, it's possible to use additives that can speed up the curing process. Pavers before & after cleaning and sealing.
Allow any moisture in or on the surface of the pavers to dry at least 24 hours. Allow 48 hours or more if temperatures are cool or a pressure washer has been used. For best results the sand should be dry to its full depth before sealing. It is always recommended to test the sealer of choice in a small area first.
If a white haze appears on sealed pavers, it is less likely that the white spots are efflorescence but rather, water condensation collecting underneath the sealer. Removal is still possible, but a chemical solution is required. If your sealer is oil-based, the fix is to re-emulsify the sealer with Xylene.
The first day, a chemical wash is done followed by pressure cleaning with a 5,000 P.S.I pressure cleaner, getting almost anything out(stubborn penetrating stains like oil and rust may not come out). The second day, given that the surface to be sealed is completely dry, a sealer is sprayed on the pavers.
On Using Pavers for Landscapes
Pavers are great for patios, since they allow water to seep through and not form puddles and pools.
You pressure clean the pavers, re-sand the paver joints and then apply two coats of your favorite paver sealer and the job was complete.
Your concrete pavers will look better than new. 5 gal. bucket covers approximately 500 sq. ft.